Professional Documents
Culture Documents
Your Account
info@boltdepot.com • 1-866-337-9888
Stainless markings vary. 18-8 Stainless All Sizes thru 20,000 Min. 65,000 Min.
Most stainless is non- 1" 65,000 100,000 –
Steel alloy with 17-19%
magnetic Typical 150,000 Typical
Chromium and 8-13%
Nickel
Metric Bolts
Mechanical Properties
Nominal
Class and
Head Marking Size Range Proof Min. Yield Min. Tensile
Material Load Strength Strength
(mm)
(MPa) (MPa) (MPa)
https://www.boltdepot.com/fastener-information/materials-and-grades/bolt-grade-char... 11/04/2018
Bolt Depot - Bolt Grade Markings and Strength Chart Página 2 de 2
Stainless markings vary. A-2 Stainless All Sizes thru 210 Min. 500 Min.
Most stainless is non- 20mm 450 Typical 700 Typical
Steel alloy with 17- 19%
magnetic.
chromium and 8-13%
Usually stamped A-2.
nickel
Tensile Strength: The maximum load in tension (pulling apart) which a material can withstand before breaking or fracturing.
Yield Strength: The maximum load at which a material exhibits a specific permanent deformation
Proof Load: An axial tensile load which the product must withstand without evidence of any permanent set.
https://www.boltdepot.com/fastener-information/materials-and-grades/bolt-grade-char... 11/04/2018