Professional Documents
Culture Documents
The amplifier is to be powered from a 3.3 volts power supply and with a current reference of
10μA. The capacitors can be designed using poly1-poly2. The current sources/sinks required
for biasing can be derived from the given current reference using current mirrors. Please use
UMC MIXED MODE 0.18-μm technology
Note—
you may choose a topology of your own. (do a good literature survey)
No two groups should have exactly same design of OPAMP
Do not simply copy a design from a research paper. Innovate in the design
Common mode feedback is necessary for fully differential topology
Draw the layout of opamp. Final results to be only after layout
LDO must be designed taking netlist of opamp from its layout.
Design must be tested for process variations.