Professional Documents
Culture Documents
Ormco Corporation
1717 West Collins Avenue
Orange, CA 92867
Appliance Systems
page 2 Damon System page 28 Tweed
page 3 Damon Q page 29 Alexander Signature Line
page 5 Damon Clear page 30 Mini-Wick System
page 8 Damon 3MX page 31 Straight-Wire Appliances
page 10 Damon 3 page 33 Straight-Wire Synthesis
page 12 Damon Auxiliary Products page 36 Mini-Twin
page 13 Prodigy SL page 39 Mini-Twin VS
page 15 Titanium Orthos page 40 Twin
page 18 Orthos page 42 Attract
page 21 Bios page 44 Inspire ICE
page 23 Orthos AP page 46 SpiritMB
page 24 Mini Diamond Twin page 48 Alexander SpiritMB
page 26 Mini Diamond VS page 49 STb Light Lingual System
page 27 Diamond Full-Size Twin page 52 Gen 7 Complete Lingual System
SECTION 1 PAGE 2 APPLIANCE SYSTEMS
Damon System ®
The Damon System eliminates the need for traditional mechanics that
may require more frequent tooth extractions. Because the Damon System
employs a lower ligation force, frictional resistance is minimized, leading
to less unwanted forces in magnitude and direction. This facilitates more
efficient treatment modalities. As a result, you can provide your patients
with fast, comfortable treatment and fewer appointments.
APPLIANCE SYSTEMS SECTION 1 PAGE 3
Damon System
Damon Q ® ™
Damon Q is a major step forward in low-friction, passive self-ligation technology that delivers
far more than straight teeth. Whether you are new to self-ligation or an experienced user,
Damon Q provides fast, controlled tooth movement with extraordinary clinical results.
5 4 3 2 1 5
1 4
2 3 2
4 1
5
*Colored ID dots are located on tie-wings of each bracket.
Damon Clear ® ™
Damon Clear combines the clinically proven low-friction properties of passive self-ligation
technology with the aesthetics that today’s image-conscious patients demand. The result is
a crystal-clear appliance that surpasses expectations in beauty and functionality.
Enhanced Strength
• Sturdy construction with fortified slide window channel
and tie-wings for exceptional strength and durability
• Four walls enable effective torque expression for
meticulous finishing
• Up to 70% greater rotation strength and 13% more
torque than the leading active self-ligating aesthetic
bracket*
Now available in
clear on both arches!
5 4 3 2 1 51 42 3 24 15
*Colored ID dots are located on tie-wings of each bracket.
†
Available in 2013
APPLIANCE SYSTEMS SECTION 1 PAGE 7
Damon 3MX ™
Extraordinary Strength
• Stainless steel 17-4 metal-injection molded (MIM)
construction for strength and durability
• Four solid walls for fast, low-friction tooth movement
and superior control
• Remarkably easy-to-use slide mechanism with deep
funnel and backstop for quick wire changes
• Smooth slot corners for reduced binding even in severe
deflections
• Vertical slot for removable drop-in hooks and other
auxiliaries
• Contoured base design and Optimesh® XRT pads for
optimal bond retention
Bracket Identification
Permanent ID marking molded
in the base of the slot (International System)
*ID dots are distogingival on all brackets including high and low torques.
**ID markings are located on center of slide.
APPLIANCE SYSTEMS SECTION 1 PAGE 9
Damon 3
Extraordinary Beauty
• A combination of clear material and stainless steel
for aesthetics
• Four solid walls for fast, low-friction tooth movement
and superior control
• Ultra-smooth contours and rounded edges
*ID dots are distogingival on all brackets, including high and low torques.
**ID markings are located on center of slide.
APPLIANCE SYSTEMS SECTION 1 PAGE 11
Instruments
SpinTek™ Opening Tool (Use with Damon Q, Damon Clear & SnapLink tubes) 866-4014
SpinTek™ Opening/Closing Tool (Use with Damon Q, Damon Clear & SnapLink tubes) 866-4016
Damon 3/3MX Dual Tip Opening Instrument – 45°/90° (single piece) 866-4012
Damon 3/3MX Dual Tip Opening Instrument – 0°/90° (single piece) 866-4013
Prodigy SL
Ormco’s Prodigy SL active bracket system puts the control back
™
6
4
2
0
Prodigy SL In-Ovation® R Empower®
Empower is a registered trademark of American Orthodontics. In-Ovation is a registered trademark of Dentsply GAC.
Prodigy SL (cont.) ™
Auxiliary Products
Part Numbers
Titanium Orthos ™
Straightwire Perfected
Coordinated System
Titanium Orthos combines the most precise bracket
and wire system with the proven material benefits of
titanium for the finest straightwire twin appliance on
the market.
Lateral +14° +9° 0° High, non CIS 448-8217 448-8216 449-8217 449-8216
Lateral +9° +9° 0° Standard, non CIS 448-6213 448-6212 449-6213 449-6212
Lateral – hook +9° +9° -4.5° Standard 448-9211 448-9210 449-9211 449-9210
Cuspid – hook +7° +10° 0° Super, M/G hook 448-9319 448-9318 449-9319 449-9318
1st Bicuspid – hook -6° 0° 0° Standard, G/O 448-6413 448-6412 449-6413 449-6412
2nd Bicuspid -8° +4° 0° Standard, G/O 448-6511 448-6510 449-6511 449-6510
2nd Bicuspid – hook -8° +4° 0° Standard, G/O 448-6513 448-6512 449-6513 449-6512
1st Molar – hook -10° 0° 10° Single 448-1201 448-0201 449-1201 449-0201
1st Molar – hook -10° 0° 15° Single 448-2116 448-2016 449-2116 449-2016
2nd Molar – hook -10° 0° 15° Single 448-2117 448-2017 449-2117 449-2017
Lateral -5° +4° 0° Standard, non CIS 448-8629 448-8624 449-8629 449-8624
Cuspid – hook +7° +6° -4.5° High, M/G hook 448-9719 448-9718
Cuspid – hook +7° +6° -4.5° High 449-9721 449-9720
Cuspid – hook -6° +6° -4.5° Standard 448-7711 448-7710 449-7711 449-7710
1st Bicuspid -7° +3° 0° Standard, G/O 448-6813 448-6812 449-6813 449-6812
1st Bicuspid – hook -7° +3° 0° Standard, G/O 448-6815 448-6814 449-6815 449-6814
2nd Bicuspid -9° +3° 0° Standard, G/O 448-6911 448-6910 449-6911 449-6910
2nd Bicuspid – hook -9° +3° 0° Standard, G/O 448-6913 448-6912 449-6913 449-6912
Single-Patient Kits
Single-Patient Kit Upper/Lower 5 – 5, hooks on Cuspids 740-1278 740-1279
Orthos ®
Straightwire Simplified
Orthos (cont.) ®
Orthos
Tooth Torque Ang. Rot* Bracket Type Part Numbers
Maxillary .018 L .018 R .022 L .022 R
Central +15° +5° 0° Twin 454-0111 454-0110 455-0111 455-0110
1st Bicuspid – hook -6° 0° 0° Twin, G/O 454-1411 454-1410 455-1411 455-1410
2nd Bicuspid -8° +4° 0° Twin, G/O 454-0511 454-0510 455-0511 455-0510
2nd Bicuspid – hook -8° +4° 0° Twin, G/O 454-1511 454-1510 455-1511 455-1510
2nd Bicuspid – hook -8° +4° 0° Twin 454-1513 454-1512 455-1513 455-1512
1st Molar -10° 0° 15° Accent single 340-5116 340-4116 342-5115 342-4115
1st Molar – weldable -10° 0° 15° Peerless .045 combo 195-0210 196-0210 195-0209 196-0209
2nd Molar -10° 0° 15° Accent single 340-5116 340-4116 342-5115 342-4115
2nd Molar – weldable -10° 0° 15° Accent single 515-0116 514-0116 515-0115 514-0115
Orthos (cont.) ®
Orthos
Tooth Torque Ang. Rot* Bracket Type Part Numbers Mandibular
Mandibular .018 L .018 R .022 L .022 R
Central -5° +2° 0° Twin 454-0615 454-0610 455-0615 455-0610
Cuspid – hook -6° +6° -4.5° Twin 454-1711 454-1710 455-1711 455-1710
1st Bicuspid -7° +3° 0° Twin, G/O 454-0813 454-0812 455-0813 455-0812
1st Bicuspid – hook -7° +3° 0° Twin, G/O 454-1813 454-1812 455-1813 455-1812
1st Bicuspid -7° +3° 0° Twin 454-0815 454-0814 455-0815 455-0814
1st Bicuspid – hook -7° +3° 0° Twin 454-1815 454-1814 455-1815 455-1814
2nd Bicuspid -9° +3° 0° Twin, G/O 454-0911 454-0910 455-0911 455-0910
2nd Bicuspid – hook -9° +3° 0° Twin, G/O 454-1911 454-1910 455-1911 455-1910
1st Molar – weldable -10° 0° 0° Peerless single 189-0300 190-0300 189-0299 190-0299
2nd Molar – weldable -10° 0° 5° Accent single 514-0114 515-0114 514-0113 515-0113
Single-Patient Kits
Single-Patient Kit Upper/Lower 5 – 5, hooks on Cuspids 740-1246 740-1247
Bios System ®
Bios
Tooth Torque Ang. Rot* Bracket Type Part Numbers
Maxillary .018 L .018 R .022 L .022 R
Central +22° +5° 0° Twin 348-6119 348-6118
1st Molar -10° 0° 15° Accent double 340-1240 340-0240 342-1239 342-0239
1st Molar – weldable -10° 0° 15° Accent double 521-0238 520-0238 521-0239 520-0239
2nd Molar -10° 0° 15° Accent single, distal extension 340-5216 340-4216 342-5215 342-4215
2nd Molar – weldable -10° 0° 15° Accent single, distal extension 515-0216 514-0216 515-0215 514-0215
Bios
Tooth Torque Ang. Rot* Bracket Type Part Numbers
Mandibular .018 L .018 R .022 L .022 R
Central -5° +2° 0° Twin 455-0615 455-0610
Cuspid – hook +7° +6° -4.5° Twin, M/G hook 348-7719 348-7718
1st Molar – weldable -27° 0° 5° Accent double 521-0232 520-0232 521-0231 520-0231
2nd Molar -27° 0° 5° Accent single, distal extension 340-5232 340-4232 342-5231 342-4231
2nd Molar – weldable -27° 0° 5° Accent single, distal extension 515-0232 514-0232 515-0231 514-0231
Orthos AP
Orthos AP Marking System
• All brackets are color-coded by quadrant. To achieve the proper expression of the Orthos appliance,
Upper right – Orange Upper left – White all brackets should be placed at the following heights
Lower right – Purple Lower left – Green (based on the average patient):
Lower anteriors – Black Maxillary Mandibular
• The dimple or paint mark is on the distogingival tie-wing Central 4.6 mm 4.0 mm
unless otherwise noted. Lateral 3.9 mm 4.0 mm
• Upper and lower 2nd bicuspids have dimples/paint on Cuspid 4.7 mm 4.8 mm
both gingival tie-wings. 1st Bicuspid 4.5 mm 4.0 mm
• Upper centrals are wider than upper laterals. 2nd Bicuspid 3.6 mm 4.0 mm
• The lower laterals, cuspids and bicuspids also feature a
scribe line on the occlusal tie-wings.
Orthos AP
Tooth Torque Ang. Rot* Bracket Type Part Numbers
Maxillary .018 L .018 R .022 L .022 R
Central +11° +4° 0° Twin 348-8111 348-8110 349-8111 349-8110
1st Bicuspid -2° +4° 0° Twin, G/O 348-8411 348-8410 349-8411 349-8410
2nd Bicuspid -3° +6° 0° Twin, G/O 348-8511 348-8510 349-8511 349-8510
Cuspid – hook -2° +2° -6° Twin 348-9711 348-9710 349-9711 349-9710
1st Bicuspid -8° +3° 0° Twin, G/O 348-8813 348-8812 349-8813 349-8812
2nd Bicuspid -8° +6° 0° Twin, G/O 348-8911 348-8910 349-8911 349-8910
All hooks are distogingival, unless otherwise noted.
* Compensation in slot.
Diamond ™
1 1
Diamond (cont.) ™
Tweed
Tooth Torque Ang. Bracket Type Part Numbers
Maxillary .022 L .022 R
Central 0° 0° Single 342-0411/Universal
Lateral 0° 0° Single 342-0412/Universal
Cuspid 0° 0° Single 342-0413/Universal
Bicuspid 0° 0° Wedge single 342-0414/Universal
Mandibular .022 L .022 R
Anterior 0° 0° Wedge single 342-0511/Universal
Cuspid 0° 0° Wedge single 342-0513/Universal
Bicuspid 0° 0° Wedge single 342-0514/Universal
APPLIANCE SYSTEMS SECTION 1 PAGE 29
2nd Molar -10° 0° 15° Accent Terminal, distal extension 340-5216 340-4216
2nd Molar – weldable -10° 0° 15° Accent Terminal, distal extension 515-0216 514-0216
1st Molar – weldable -10° -6° 0° Peerless lip bumper tube 175-0104 176-0104
Dr. Alexander recommends -6° angulation for buccal tube placement on bands. All hooks are distogingival unless otherwise noted.
* Compensation in slot/Distal offset.
Mini-Wick System ™
The
Straight-Wire ®
Appliances...
The Family Of A Proven Clinical System
Compound Contour design mirrors both the mesiodistal Torque-In-Base is the key to uniformity of Straight-Wire
and the occlusogingival anatomy of the middle third of bracket placement, ensuring high levels of predictability
every tooth’s clinical crown. This allows every Straight-Wire and accuracy in result. With every Straight-Wire Appliance,
Appliance to fit snugly on the tooth for maximum efficiency. the center of the slot and the center of the base are always
Compound contours greatly enhance accurate bracket on the same plane for consistent and easy bracket
placement on the center of the crown. placement.
Straight-Wire Synthesis ® ™
Cuspid – hook +3° +9° +4° Twin 338-1341 338-1340 339-1341 339-1340
Cuspid – hook -2° +9° +4° Twin 338-1351 338-1350 339-1351 339-1350
Cuspid – hook -2° +13° +4° Twin 338-1311 338-1310 339-1311 339-1310
Bicuspid – hook -7° 0° +2° Twin, G/O 338-1511 338-1510 339-1511 339-1510
Bicuspid – hook -7° 0° +2° Twin, M/G hook 338-2531 338-2530 339-2531 339-2530
Bicuspid – hook -7° 0° +2° Twin, G/O, M/G hook 338-2511 338-2510 339-2511 339-2510
Bicuspid – hook -7° +2° 0° Twin, G/O 338-2523 338-2522 339-2523 339-2522
Bicuspid – hook -7° +2° 0° Twin, G/O, M/G hook 338-2521 338-2520 339-2521 339-2520
APPLIANCE SYSTEMS SECTION 1 PAGE 35
Cuspid – hook -11° +7° +2° Twin 338-1411 338-1410 339-1411 339-1410
1st Bicuspid -17° -1° +4° Twin, G/O 338-0611 338-0610 339-0611 339-0610
1st Bicuspid -17° -1° +4° Twin 338-0631 338-0630 339-0631 339-0630
1st Bicuspid – hook -17° -1° +4° Twin, G/O 338-1611 338-1610 339-1611 339-1610
1st Bicuspid – hook -17° -1° +4° Twin 338-1631 338-1630 339-1631 339-1630
1st Bicuspid – hook -17° +2° 0° Twin, G/O, M/G hook 338-2621 338-2620 339-2621 339-2620
1st Bicuspid – hook -17° +2° 0° Twin, M/G hook 339-2641 339-2640
1st Bicuspid – hook -17° +2° 0° Twin, D/G hook 339-2643 339-2642
1st Bicuspid – hook -17° +2° 0° Twin, G/O, D/G hook 338-2623 338-2622 339-2623 339-2622
2nd Bicuspid -22° -1° +4° Twin, G/O 338-0711 338-0710 339-0711 339-0710
2nd Bicuspid -22° -1° +4° Twin 338-0731 338-0730 339-0731 339-0730
2nd Bicuspid – hook -22° -1° +4° Twin, G/O 339-1711 339-1710
2nd Bicuspid – hook -22° +2° 0° Twin, G/O 338-2723 338-2722 339-2723 339-2722
2nd Bicuspid – hook -22° +2° 0° Twin, M/G hook 339-2741 339-2740
2nd Bicuspid – hook -22° +2° 0° Twin, G/O, M/G hook 338-2721 338-2720 339-2721 339-2720
All hooks are distogingival unless otherwise noted.
*See your Ormco representative about bondable molar tube options.
Complementary Products
See various sections of this catalog for the following products that complement Synthesis brackets.
• Standard High-Retention Bands
• Micro Weldable Buccal Tubes
• Archwires in the Tru-Arch Arch Form (Stainless Steel, Align SE 200 and Copper Ni-Ti)
Mini-Twin ™
• The vertical scribe line aligns precisely with the crown-long axis,
simplifying accurate bracket placement. As is the case with all
Straight-Wire Appliances, the archwire slot of Mini-Twin appli-
ances is engineered to align with the horizontal axis of the tooth.
Bracket ID illustration
represents the
Andrews prescription.
Mini-Twin (cont.) ™
Mini-Twin
Tooth Torque Ang. Rot. Bracket Type Part Numbers
Maxillary .018 L .018 R .022 L .022 R
Central +17° +5° 0° Twin 328-0141 328-0140 329-0141 329-0140
Central +12° +5° 0° Twin 328-0111 328-0110 329-0111 329-0110
Central +7° +5° 0° Twin 328-0121 328-0120 329-0121 329-0120
Lateral +3° +9° 0° Twin 328-0221 328-0220 329-0221 329-0220
Lateral +8° +9° 0° Twin 328-0211 328-0210 329-0211 329-0210
Lateral +10° +9° 0° Twin 328-0241 328-0240 329-0241 329-0240
Lateral – hook +3° +9° 0° Twin 328-1221 328-1220
Cuspid -7° +11° 0° Twin 328-0321 328-0320 329-0321 329-0320
Cuspid -2° +9° 4° Twin 329-0351 329-0350
Cuspid -2° +13° 4° Twin 329-0313 329-0312
Cuspid – hook -7° +11° 0° Twin 328-1321 328-1320 329-1321 329-1320
Cuspid – hook -2° +9° 4° Twin 328-1351 328-1350 329-1351 329-1350
Cuspid – hook -2° 0° 4° Twin 328-1317 328-1316
Cuspid – hook -2° +13° 4° Twin, long radius 329-1311 329-1310
Cuspid – hook -2° +13° 4° Twin 328-1313 328-1312 329-1313 329-1312
Cuspid – hook 0° +6° 0° Twin 328-1331 328-1330 329-1331 329-1330
Cuspid – hook +3° +9° 4° Twin 329-1341 329-1340
Bicuspid -7° 0° 2° Twin 428-0511 428-0510 429-0511 429-0510
Bicuspid -7° 0° 0° Twin 428-0521 428-0520 429-0521 429-0520
Bicuspid -7° 0° 0° Twin, G/O 428-0571 428-0570 429-0571 429-0570
Bicuspid -7° 0° 2° Twin, G/O 428-0575 428-0574 429-0575 429-0574
Bicuspid – hook -7° 0° 2° Twin 428-1511 428-1510 429-1511 429-1510
Bicuspid – hook -7° 0° 0° Twin 428-1521 428-1520 429-1521 429-1520
Bicuspid – hook -7° 0° 0° Twin, G/O 428-1571 428-1570 429-1571 429-1570
Bicuspid – hook -7° 0° 2° Twin, G/O 429-1573 429-1572
Bicuspid – hook -7° 0° 2° Twin, M/G hook 429-2511 429-2510
Bicuspid – hook -7° 0° 0° Twin, M/G hook 428-2521 428-2520
Mini-Twin (cont.) ™
Mini-Twin
Tooth Torque Ang. Rot. Bracket Type Part Numbers
Mandibular .018 L .018 R .022 L .022 R
Anterior -1° 0° 0° Twin 328-0021 328-0020 329-0021 329-0020
Anterior – hook -1° 0° 0° Twin 328-1021 328-1020
Cuspid -11° +5° 0° Twin 328-0421 328-0420 329-0421 329-0420
Cuspid -11° +7° 2° Twin 329-0411 329-0410
Cuspid – hook -11° +5° 0° Twin 328-1421 328-1420 329-1421 329-1420
Cuspid – hook -11° +7° 2° Twin 328-1411 328-1410 329-1411 329-1410
Cuspid – hook 0° +5° 0° Twin 328-1431 328-1430 329-1431 329-1430
1st Bicuspid -17° 0° 4° Twin 428-0611 428-0610 429-0611 429-0610
1st Bicuspid -17° 0° 0° Twin 428-0621 428-0620 429-0621 429-0620
1st Bicuspid -17° 0° 0° Twin, G/O 428-0671 428-0672 429-0671 429-0674
1st Bicuspid -17° 0° 4° Twin, G/O 429-0673 429-0672
1st Bicuspid – hook -17° 0° 4° Twin 428-1611 428-1610 429-1611 429-1610
1st Bicuspid – hook -17° 0° 0° Twin 428-1621 428-1620 429-1621 429-1620
1st Bicuspid – hook -17° 0° 0° Twin, G/O 429-1671 429-1670
1st Bicuspid – hook -17° 0° 4° Twin, G/O 428-1673 428-1672 429-1673 429-1672
2nd Bicuspid -22° 0° 4° Twin 428-0711 428-0710 429-0711 429-0710
2nd Bicuspid -22° 0° 0° Twin 428-0721 428-0720 429-0721 429-0720
2nd Bicuspid -22° 0° 4° Twin, G/O 428-0771 428-0770 429-0771 429-0770
2nd Bicuspid -22° 0° 0° Twin, G/O 428-0773 428-0772 429-0773 429-0772
2nd Bicuspid – hook -22° 0° 4° Twin 428-1711 428-1710 429-1711 429-1710
2nd Bicuspid – hook -22° 0° 0° Twin 428-1721 428-1720 429-1721 429-1720
2nd Bicuspid – hook -22° 0° 0° Twin, G/O 429-1771 429-1770
2nd Bicuspid – hook -22° 0° 4° Twin, G/O 429-1773 429-1772
Mini-Twin VS
Each Mini-Twin bracket has a coordinated color ID system with the other Straight-Wire® mesh products. The color ID
is on the disto-gingival tie-wing, so that bracket identification is easy. For added accuracy the upper brackets have a
cast dot ID. The vertical slot is an .018 x .018 dimension.
Twin ™
The Andrews Straight-Wire System is the heritage of Appliance (SWA). These brackets remain unsurpassed in
“A” Company. The “A” in “A” Company is because of their ability to treat reliably and consistently to the standards
Dr. Larry Andrews and his vision so many years ago. that were established by Dr. Andrews. These standards were
The full-size Twin bracket is the original Straight-Wire built on the foundation of orthodontic scientific research.
Twin
Tooth Torque Ang. Rot. Bracket Type Part Numbers
Maxillary .018 L .018 R .022 L .022 R
Central +7° +5° 0° Twin, Set I 364-1037 364-1032
Central +12° +5° 0° Twin, Set III 364-1038 364-1033
Central +17° +5° 0° Twin 364-1041 364-1036
Lateral +3° +9° 0° Twin 364-1042 364-1026
Lateral +8° +9° 0° Twin 364-1043 364-1027
Lateral +10° +9° 0° Twin 364-1046 364-1030
Cuspid -7° +11° 0° Twin 364-1048 364-1000
Cuspid -2° +13° 4° Twin 364-1053 364-1005
APPLIANCE SYSTEMS SECTION 1 PAGE 41
Twin (cont.)
Tooth Torque Ang. Rot. Bracket Type Part Numbers
Maxillary .022 L .022 R
Cuspid – PA -7° +14° 4° Twin T2, power arm 364-1068 364-1020
Cuspid – hook -7° +11° 0° Twin 364-1054 364-1006
Cuspid – hook -2° +13° 4° Twin 364-1065 364-1017
Bicuspid – hook -7° 0° 2° Twin, M/G hook 464-1096 464-1087
Bicuspid -7° 0° 2° Twin 464-1093 464-1083
Bicuspid -7° +2° 0° Twin 464-1020 464-1000
Bicuspid – hook -7° +2° 0° Twin 464-1024 464-1001
Bicuspid -7° +2° 0° Twin, G/O 464-1026 464-1004
1st Bicuspid – PA -7° +5° 4° Twin T2, power arm 464-1017 464-1013
2nd Bicuspid – PA -7° -1° 4° Twin T2, M/G power arm 464-1125 464-1002
Attract ™
V
V
V
V
Attract (cont.) ™
Attract
Tooth Torque Ang. Rot. Bracket Type Part Numbers
Maxillary .018 L .018 R .022 L .022 R
Central +7° +5° 0° Single 364-7016 364-7012
1st Bicuspid – hook -17° -1° 4° Single 363-7036 363-7052 364-7043 364-7055
2nd Bicuspid – hook -22° -1° 4° Single 363-7032 363-7056 364-7039 364-7059
InspireICE
™
u
compromising treatment.
Available with Insignia.™
See section 3, page 2 for more information.
APPLIANCE SYSTEMS SECTION 1 PAGE 45
1st Bicuspid – hook -17° -1° 4° Twin 443-1611 443-1610 444-1611 444-1610
2nd Bicuspid – hook -22° -1° 4° Twin 443-1711 443-1710 444-1711 444-1710
Single-Patient Kits
Single-Patient Kit Upper 3 – 3, hooks on Cuspids 746-4300 746-4400
Spirit MB ®
Mandibular
Red – Anteriors
Purple – Cuspids
Pink – Bicuspids
APPLIANCE SYSTEMS SECTION 1 PAGE 47
Single-Patient Kits
Single-Patient Kit Upper 3 – 3 740-0222
Single-Patient Kit Upper 3 – 3, hooks on Cuspids 740-1221 740-1222
Single-Patient Kit Upper/Lower 3 – 3 740-0224
Single-Patient Kit Upper/Lower 3 – 3, hooks on Cuspids 740-1223 740-1224
Single-Patient Kit Upper 5 – 5, hooks on Cuspids 740-1225 740-1226
Single-Patient Kit Upper/Lower 5 – 5 740-0227 740-0228
Single-Patient Kit Upper/Lower 5 – 5, hooks on Cuspids 740-1227 740-1228
All hooks are distogingival unless otherwise noted.
Alexander Spirit MB ®
Cuspid -3° +10° Single, flat wings 3.1 1.0 494-3311 494-3310
Lateral – hook -5° +6° Single, curved wings 3.1 1.5 494-3063 494-3062
Cuspid -7° +6° Single, flat wings 3.1 1.0 494-3343 494-3342
Single-Patient Kits
Single-Patient Kit Upper/Lower 5 – 5 740-0238
Lingual Brackets
STb™ Light Lingual System
The light-force mechanics of the STb Light Lingual System are designed
to decrease the stress of tooth movement, making treatment far gentler. In
most cases, a full TARG or CLASS setup is not required, simplifying and
reducing costs typically associated with lingual cases. Indirect bonding
application can be fabricated in your own practice or by AOA laboratory.
6.09 mm
Utilizing passive ligation, STb Light Lingual dramatically reduces friction
and forces allowing teeth to move freely with exceptional efficiency. It’s 4.57 mm
lingual like you’ve never seen it before.
5 4 3 2 1 5
1 4
2 3 2
4 1
5
Central Lateral Cuspid 1st Bicuspid 2nd Bicuspid
Upper* Dark Blue Pink Green Purple Purple
High Torque** Red Red Red
Low Torque** Green Green
Lower* Yellow Yellow Light Blue White Red
High Torque** Red
Low Torque** Green Green
*ID dots are distogingival on all brackets, including high and low torques.
**ID dots are located on center of slide.
Please reference Lingual Arch Form wires for STb Light Lingual System archwire part numbers
(See Section 5, Page 26)
APPLIANCE SYSTEMS SECTION 1 PAGE 51
Please reference Lingual Arch Form wires for STb Straightwire System archwire part numbers
See Section 5, Page 26
Complementary Products
See various sections of this catalog for the following product
that complement the Lingual brackets.
• Grēngloo™
• DemiOrtho™
• Lingual Wires
• Lingual Straight Wires
Gen 7 Complete
Lingual Appliance System and Associated Products
Ormco’s original lingual appliance system, Gen 7 has significant orthodontist and patient benefits:
• Easier to ligate – more under-tie-wing area
• Easier archwire insertion – rounded slot openings and gingival ramp guide wires into slots
• More comfortable and more compact
Single-Patient Kits
Single-Patient Kit Upper/Lower 5 – 5 740-0062 Molar – Hinge Cap
with Hook
Two-Patient Kit Upper/Lower 5 – 5 740-0063
All lingual brackets include a hook, except the upper molar twin with transpalatal sheath.
Section
Two
Aligners
page 2 ClearGuide
page 3 Simpli5
page 4 Red, White and Blue
SECTION 2 PAGE 2 ALIGNERS
Training 2 phase guided instruction for case Customer care support for Customer care support for
submission and Approver software order entry order entry
Lead Time 4 weeks 4 weeks 3 weeks
# of Aligners Up to 20 5-10 3
The Insignia software allows you to incorporate your creative, artistic skill to custom craft each patient’s smile. You can affect
changes to a tooth’s position including tip, torque, rotation, in/out, occlusal/gingival, and mesial/distal. The design you perfect
on screen generates the final desired outcome that is manufactured into the aligner sets to create predictable, comfortable tooth
movements and beautiful smiles. And, a unique self-check mechanism specific only to Clearguide allows you to make sure the
patient’s treatment is progressing on track. Aligners are provided in phases and incremental movements are built into
subsequent aligners as needed to keep the patient moving towards their new smile as efficiently as possible.
CASE SELECTION
Malocclusions treatable with Insignia Clearguide Express
Upper Arches
Lower Arches
Simpli5
™
Consultation Models with a set of aligners are great for in-office education! Aligners are marked for easy
identification with one dot
representing each aligner
(upper blue/lower red).
Red, White and Blue Aligner System is perfect for minor spacing
or crowding and is an ideal appliance for relapse cases.
Digital Systems
page 2 Insignia
SECTION 3 PAGE 2 DIGITAL SYSTEMS
Insignia ™
A culmination of decades of research and innovation, Insignia developed to place brackets in the precise position required to
uses advanced algorithms in combination with PVS impressions optimally obtain the desired results in less time.
to create a 3-D virtual model of the patient’s anatomy. With
Insignia, you have complete control of each case. Although • User friendly software to treatment plan and visualize the
an initial suggested course of treatment is provided through end result
the Approver software, you are able to view each tooth in • Tailor-made appliances reduce mid-treatment adjustments
great detail- Multiple views and rotations allow you to perfect and deliver precise, predictable finishes
each case and make cosmetic adjustments to create a truly • Time-consuming procedures (bracket bonding) may be
unique smile. administered by staff members allowing you to focus on
diagnostics and treatment planning
Insignia is the only treatment system that delivers a complete • No start-up, licensing or inventory costs
customized solution – based on the treatment you design and • View final smile design prior to treatment – a powerful
approve; patient-specific brackets and wires are fabricated to consultation tool.
reach your desired occlusion. Precision placement guides are
Pretreatment
Posttreatment
Insignia
Phase 1 Phase 3
Using the Insignia case submission portal, MyInsigniaOrtho.com, Precision bracket placement guides are one of the
offices work with a reputable Digital Solutions Specialist to best features of Insignia. The placement guides give the user
set up their case preferences and complete their profile the ability to directly bond brackets in the most precise
setup. Cases will be submitted through this portal to the position for the best results according to the approved
Insignia Smile Design Lab. treatment plan. A critical step for success, the Ormco Sales
Representative or Digital Solutions Specialist will be present
for the initial Insignia bonding. In some states and
Phase 2 countries, office workflow may be streamlined by allowing
After cases are submitted, the most optimal result for that key staff members to perform bonding. It is recommended
patient is created and submitted to the orthodontist for that both the orthodontist and staff participate in this
review. Through the use of Insignia Approver, the doctor session. Additionally we suggest that this bonding day is
is able to view, edit and incorporate their own treatment scheduled on a day when other patients are not being seen.
mechanics to perfect the smile before custom brackets and
wires are manufactured.
Buccal Tubes
page 2 Re-convertible Tubes
page 3 Titanium Tubes
Page 4 Accent and Accent Mini Tubes
page 5 Peerless and Peerless Mini Tubes
page 9 Gingivally Offset Tubes
page 10 Micro Tubes
page 14 Andrews Translation Tubes
SECTION 4 PAGE 2 BUCCAL TUBES
Whether you treat with conventional twins or self-ligating brackets, the SnapLink re-convertible tube helps you
gain more control and treat patients more efficiently. Each tie-less, low-friction SnapLink tube makes wire
changes and posterior tooth movement snap. As a result, patients will experience shorter appointments
and more comfortable treatments.
Instruments
SpinTek Slide Opening/Closing Instrument 866-4016
SpinTek Slide Opening Instrument 866-4014
BUCCAL TUBES SECTION 4 PAGE 3
Pad Size – The largest pad size Handling Notch – A unique notch Teardrop Design – Buccal tubes
available provides improved bond on the occlusal side makes holding on the lower arch feature a
strength and a better fit to the the Titanium buccal tube a cinch teardrop design to keep them
tooth. and helps with initial placement on out of occlusion. There are also
the tooth. no tie-wings to create food traps
and inhibit patient comfort.
I.D. System – The I.D. dot is Comfortable Hook Design – The Ormco hook
compatible with the legendary design tilts away from the gingiva to avoid
Orthos system. impingement and enhance patient comfort.
*All tubes are single, bondable and have integral mesiogingival hooks. No distal extension available.
Titanium buccal tubes are color-coded by quadrant – Upper right: Blue, Upper left: Black, Lower right: Red, Lower left: Yellow.
The Accent buccal tube is designed to help eliminate occlusal tie-wing inteference and premature cap
failure. Accent is nonconvertible, has no tie-wings and features an accentuated mesial opening.
Distal
MBT Rx* Torque Angle Offset Bondable Part Numbers
Upper .018 L .018 R .022 L .022 R
First Molar -14 0 10 340-1365 340-1364 342-1365 342-1364
Second Molar -14 0 10 340-1375 340-1374 342-1375 342-1374
Lower .018 L .018 R .022 L .022 R
First Molar -20 0 0 340-1367 340-1366 342-1367 342-1366
Second Molar -10 0 5 340-1377 340-1376 342-1377 342-1376
* MBT prescription does not imply endorsement by Drs. McLaughlin, Bennett and Trevisi.
Upper 1st Molar Tube Lower 1st Molar Tube Upper 2nd Molar Tube Lower 2nd Molar Tube
Peerless cast tubes are 20% smaller than competitive alternatives. Ormco’s advanced casting technology delivers not
only increased strength, but also produces smaller precision tubes to increase clinical efficiency and patient comfort.
Both occlusal interference and gingival impingement are reduced and hygiene is improved. Increased arch length
between first and second molars facilitates engagement in terminal tube.
Integrally cast hook stays on after conversion for Flush-seated cap provides a smooth buccal
Generous under-tie-wing area for easy ligation.
convenient elastic use. No sharp edges, strong and surface. Lightly brazed so it won’t convert
Anatomical tie-wing improves cusp clearance.
malleable. Designed to minimize tissue impingement. unintentionally, yet easily removable with
Ormco’s simple cap tool.
Unique
Chamfered occlusal shelf
archwire Headgear extends
reduces
entry for distally by .020
interference.
easy access. to aid tie-back.
Chamfered
Reduced weld flanges
archwire
allow better attachment
entry for
to band, preserving band Flush-seated cap provides a easy access.
anatomy for better fit smooth buccal surface.
and retention to tooth. Trumpeted headgear tube Lightly brazed so it won’t
aids facebow insertion. convert unintentionally, yet
easily removable with
Ormco’s simple cap tool.
Distal
Type Torque Offset Weldable Part Numbers Bondable Part Numbers
.018 L .018 R .022 L .022 R .018 L .018 R .022 L .022 R
Triple* 0° 10° 193-0402 194-0402
Double -10° 12° 171-0436 172-0436 171-0435 172-0435 340-0036 340-0136 342-0036 342-0136
Single -10° 15° 189-0318 190-0318 189-0317 190-0317 340-2359 340-2259 342-2359 342-2259
Single -10° 10° 187-0308 188-0308 187-0307 188-0307 340-2106 340-2006 342-2106 342-2006
* Gingival headgear tube.
** .028 auxiliary tube.
Peerless Upper Second Molar (Available 10 ea.) Single/Distal Extension Single/No Distal Extension
Distal
Type Torque Offset Weldable Part Numbers Bondable Part Numbers
.018 L .018 R .022 L .022 R .018 L .018 R .022 L .022 R
Single 0° 6° 513-2202 512-2202 513-2201 512-2201 340-6807 340-6707 342-6807 342-6707
Single* -10° 6° 512-2110 513-2110 512-2109 513-2109 340-5147 340-5047 342-5147 342-5047
Single -10° 6° 512-2210 513-2210 512-2209 513-2209 340-6147 340-6047 342-6147 342-6047
* Distal extension.
BUCCAL TUBES SECTION 4 PAGE 7
Distal
Type Torque Offset Weldable Part Numbers Bondable Part Numbers
.018 L .018 R .022 L .022 R .018 L .018 R .022 L .022 R
Double 0° 5° 171-0432 172-0432 171-0431 172-0431
Double -10° 0° 171-0412 172-0412 171-0411 172-0411 340-0156 340-0046 342-0156 342-0046
Double* -27° 5° 171-0426 172-0426 171-0425 172-0425 340-0526 340-0426 342-0525 342-0425
Single -10° 0° 189-0300 190-0300 189-0299 190-0299 340-2356 340-2256 342-2356 342-2256
Single (Orthos AP) -10° -4° 189-0310 190-0310 189-0309 190-0309 340-2358 340-2258 342-2358 342-2258
Single -22° 5° 187-0304 188-0304 187-0303 188-0303 340-2306 340-2206 342-2306 342-2206
Single -27° 5° 187-0306 188-0306 187-0305 188-0305 340-2316 340-2216 342-2316 342-2216
* .022 auxiliary tube – .022 x .027; .018 auxiliary tube – .018 x .027.
† Indicates nonconvertible.
Optimesh XRT
With Optimesh XRT, Ormco has once again redefined Untreated Mesh Optimesh XRT SEM photographs show a comparison
the standards of the optimal direct bond. Optimesh XRT of untreated mesh and Optimesh XRT.
incorporates our popular Mini Diamond® bracket series The Optimesh XRT coating not only
and Peerless® and Accent® buccal tubes with a specially dramatically increases available
bonding surfaces, but also enhances
treated bonding pad that enhances bond strength by 35%
the undercuts in the mesh, a critical
and minimizes cleanup at debonding.
factor in increasing adhesive-to-mesh
bond strength.
Peerless Tubes
• Peerless M-D dimensions: Triples 3.5 mm, Doubles 3.4 mm, Singles 3.3 mm, M/P and Pix 2 mm.
• All tubes have integral mesiogingival hooks unless otherwise noted.
• First molar tubes are convertible unless otherwise noted. Cap Tool #801-0094 makes conversion safe and easy.
• All facebow and lip bumper tubes are .045 and occlusal unless otherwise noted.
• All auxiliary, facebow and lip bumper tubes have 0° torque and 0° distal offset except as noted.
• Regarding triple and double tubes: all .018 main slots have an .018 x .025 auxiliary; .022 main slots have an .021 x .025 auxiliary
except as noted.
Distal
Type Torque Offset Weldable Part Numbers Bondable Part Numbers
.018 L .018 R .022 L .022 R .018 L .018 R .022 L .022 R
Single* 0° 6° 512-2102 513-2102 512-2101 513-2101 340-4707 340-4807 342-4707 342-4807
Single* -10° 6° 513-2120 512-2120 513-2119 512-2119 340-5057 340-5157 342-5057 342-5157
Single -10° 6° 513-2220 512-2220 513-2219 512-2219 340-6057 340-6157 342-6057 342-6157
Single* -20° 6° 512-2104 513-2104 512-2103 513-2103 340-5317 340-5217 342-5317 342-5217
Single* -27° 6° 512-2106 513-2106 512-2105 513-2105 340-5327 340-5227 342-5327 342-5227
Single -27° 6° 512-2206 513-2206 512-2205 513-2205 340-6327 340-6227 342-6327 342-6227
Single -27° 12° 516-2108 517-2108 516-2107 517-2107 340-0546 340-0446 342-0545 342-0445
Single* -32° 6° 512-2108 513-2108 512-2107 513-2107 340-5337 340-5237 342-5337 342-5237
* Distal extension.
Peerless Bondable
Mini Buccal Tubes
(Available 10 ea.)
M/P M/P Pix
Bondable M/P Terminal Tubes are small
(2 mm m-d dimension) Peerless tubes on
Distal
curved Optimesh XRT bases adapted to fit Type Torque Offset Part Numbers
on the mesiobuccal cusps of partially
M/P Terminal Tubes .018 .022
erupted molars. The .022 tubes are also
available nickel-brazed to upper molar Upper Left/Lower Right 0° 0° 340-0011 342-0011
crowns to accommodate archwires used in Upper Right/Lower Left 0° 0° 340-0012 342-0012
CBJ therapy.
Upper Right -10° 0° 340-0014 342-0014
Micro Tubes
Built with the Straight-Wire® approach in mind, Micro Tubes The benefits include:
offer you a full range of choices that can all be used • Reduced occlusal interference, especially on the second
interchangeably within the Straight-Wire system. Micro molars. The Micro second molar tube is one of the most
Tubes are 30% smaller than traditional buccal tubes while low-profile tubes in the industry.
still offering you control and reliability. • Improved hygiene due to the reduced size.
• Increased space between first and second molars
due to the reduced size.
Combination (OBT RMT) -14° 14° 0° Occlusal 137-0062 138-0062 137-0115 138-0115
Combination (OBT MT) -9° 10° +5° Occlusal 137-0056 138-0056 137-0107 138-0107
Combination (OBT MT 0°) -9° 10° 0° Occlusal 137-0054 138-0054 137-0105 138-0105
Combination (OBT MT 0°) -9° 10° 0° Gingival 137-0018 138-0018 137-0031 138-0031
Combination (CBT MT) -9° 10° +5° Gingival 137-0020 138-0020 137-0033 138-0033
Combination (CBT RMT) -14° 14° 0° Gingival 137-0036 138-0036 137-0067 138-0067
Double Rectangular (UDBT NT MT) No HG Tube -14° 14° 0° 137-0206 138-0206 137-0293 138-0293
Triple (TBT RMT) -14° 14° 0° Occlusal 137-0086 138-0086 137-0143 138-0143
Triple (TBT MT) -9° 10° +5° Occlusal 137-0084 138-0084 137-0137 138-0137
Triple (TBT MT 0°) -9° 10° 0° Occlusal 137-0082 138-0082 137-0135 138-0135
Triple (TGBT MT) -14° 14° 0° Gingival 137-0096 138-0096 137-0161 138-0161
Double Rectangular Lower First Double Lower First Triple Lower First Single Lower Second Single Lower Second Single
Special
Combination (RMT) w/ Tube (Lip Bumper)* -30° 4° -1° Center 137-0144 138-0144 137-0235 138-0235
Triple (LTBT RMT)* -30° 4° -1° Gingival 137-0186 138-0186 137-0269 138-0269
Single Low Torque (MT -10) -10° 0° +2° 137-0198 138-0198 137-0289 138-0289
Triple/Gingival Triple/Occlusal Combination/ Combination/ Double Rectangular Double Rectangular Upper Second Single
Headgear Headgear Gingival Headgear Occlusal Headgear Special
Double Rectangular (UDBT NT MT) No HG Tube -14° 14° 0° 437-0142 437-0042 438-0174 438-0074
Lower First Triple Lower First Single Lower Second Single Lower Second Single Lower First Double
Single Low Torque (MT -10) -10° 0° +2° 437-0121 437-0021 438-0133 438-0033
Distal Channel
Type Torque Offset Ang. Cap Technique Part Numbers
Lower First Molar .018 L .018 R .022 L .022 R
Single – PA -30° 4° -1° Yes Translation 2, power arm 137-0211 138-0211
Single – PA -30° 4° -1° Yes Translation 2, power arm 137-0126 138-0126 137-0207 138-0207
Lower Second Molar .018 L .018 R .022 L .022 R
Single – PA -31° 6° +2° Translation 3, power arm 137-0281 138-0281
Section
Five
Precision Placement
Through years of research with computer-aided engineering
technology, Ormco has refined the placement of all buccal
tubes specific to each type of band we offer.
The benefits to you include:
• The truest expression of the geometries built into every
buccal tube.
• Precision placement takes into account all the variables:
band size, buccal tube dimensions and prescription.
Prewelding Services
Ormco bands can be prewelded in “standard weld position”
or “custom weld position,” described and illustrated below. Custom Weld Position
Custom assemblies are Ormco brackets and bands pre-
welded in other than standard position. If you need a
Standard Weld Position custom placement, indicate direction and amount of change
The drawings below provide an overview of the various from standard (e.g., 0.5 mm more occlusal). If specifying a
standard positions and illustrate the attachment welded at custom angulation, indicate a plus (+) for distal root tip
0˚ angulation to the band (the bracket slot will be parallel or a minus (-) for mesial root tip. If no position criterion
to the occlusal edge of the band). is provided on the order, it will be welded in the standard
position. Custom items are not returnable.
O
O
Lower 1st Bicuspid: Centered Upper Molar – Entrance to buccal tube Lingual Lingual
will bisect the mesial/buccal cusp M D M D
Buccal Buccal
Buccal Tube
to Lower Molar Button: Centered Cleat: Centered
Upper Bicuspid: Centered
G Molars G
Lingual Lingual
M D M D
Buccal Buccal
Band kit distribution – each kit contains half rights and half lefts.
Introductory 2 2 2 2 2 2 4 4 6 6 6 8 10 10 10 10 12 12 12 10 10 10 8 8 6 6 6 4 4 2 2 2 200
Professional 2 2 4 4 6 6 8 8 10 14 14 16 20 20 24 24 26 26 24 24 20 20 18 14 12 10 8 6 4 2 2 2 400
Master 4 4 6 6 10 10 12 18 24 28 32 34 40 44 48 50 50 50 50 50 44 40 36 26 24 20 14 10 4 4 4 4 800
Refill 6 8 8 8 10 10 10 10 8 8 8 6 100
Trial kit treats 25 patients, Introductory kit/50 patients, Professional kit/100 patients, Master kit/200 patients, Refill kit/35 patients.
Standard High-Retention
First Molars
• Anatomically contoured with a buccal cusp indent groove
and lingual cusp indent contour.
• Maximum band/tooth adaptation and no occlusal interference.
• Fits over the height of greatest contour while the lingual seats
high, toward the gingiva.
• Interior of bands are microetched to increase retention.
Band kit distribution – each kit contains half rights and half lefts.
Introductory 2 2 2 2 2 2 4 4 6 6 6 8 10 10 10 10 12 12 12 10 10 10 8 8 6 6 6 4 4 2 2 2 200
Professional 2 2 4 4 6 6 8 8 10 14 14 16 20 20 24 24 26 26 24 24 20 20 18 14 12 10 8 6 4 2 2 2 400
Master 4 4 6 6 10 10 12 18 24 28 32 34 40 44 48 50 50 50 50 50 44 40 36 26 24 20 14 10 4 4 4 4 800
Refill 6 8 8 8 10 10 10 10 8 8 8 6 100
Standard High-Retention
Second Molars
• Anatomical occlusogingival buccal design, including lingual/buccal
cusp indentation, for proper band/tooth fit.
• Band seats at the height of the contour, avoiding occlusal
interference.
• Contour prevents gingival impingement.
• Interior of bands are microetched to increase retention.
Band kit distribution – each kit contains half rights and half lefts.
Introductory 2 2 2 2 2 2 4 4 6 6 6 8 10 10 10 10 12 12 12 10 10 10 8 8 6 6 6 4 4 2 2 2 200
Professional 2 2 4 4 6 6 8 8 10 14 14 16 20 20 24 24 26 26 24 24 20 20 18 14 12 10 8 6 4 2 2 2 400
Master 4 4 6 6 10 10 12 18 24 28 32 34 40 44 48 50 50 50 50 50 44 40 36 26 24 20 14 10 4 4 4 4 800
Refill 6 8 8 8 10 10 10 10 8 8 8 6 100
Trial kit treats 25 patients, Introductory kit/50 patients, Professional kit/100 patients, Master kit/200 patients, Refill kit/35 patients.
BANDS & CROWNS SECTION 5 PAGE 5
Band kit distribution – each kit contains half rights and half lefts.
Introductory 2 2 2 2 2 2 4 4 6 6 6 8 10 10 10 10 12 12 12 10 10 10 8 8 6 6 6 4 4 2 2 2 200
Professional 2 2 4 4 6 6 8 8 10 14 14 16 20 20 24 24 26 26 24 24 20 20 18 14 12 10 8 6 4 2 2 2 400
Master 4 4 6 6 10 10 12 18 24 28 32 34 40 44 48 50 50 50 50 50 44 40 36 26 24 20 14 10 4 4 4 4 800
Refill 6 8 8 8 10 10 10 10 8 8 8 6 100
Band kit distribution – each kit contains half rights and half lefts.
Introductory 2 2 2 2 2 2 4 4 6 6 6 8 10 10 10 10 12 12 12 10 10 10 8 8 6 6 6 4 4 2 2 2 200
Professional 2 2 4 4 6 6 8 8 10 14 14 16 20 20 24 24 26 26 24 24 20 20 18 14 12 10 8 6 4 2 2 2 400
Master 4 4 6 6 10 10 12 18 24 28 32 34 40 44 48 50 50 50 50 50 44 40 36 26 24 20 14 10 4 4 4 4 800
Refill 6 8 8 8 10 10 10 10 8 8 8 6 100
Trial kit treats 25 patients, Introductory kit/50 patients, Professional kit/100 patients, Master kit/200 patients, Refill kit/35 patients.
Band kit distribution – each kit contains half rights and half lefts.
Introductory 2 2 2 2 2 2 4 4 6 6 6 8 10 10 10 10 12 12 12 10 10 10 8 8 6 6 6 4 4 2 2 2 200
Professional 2 2 4 4 6 6 8 8 10 14 14 16 20 20 24 24 26 26 24 24 20 20 18 14 12 10 8 6 4 2 2 2 400
Master 4 4 6 6 10 10 12 18 24 28 32 34 40 44 48 50 50 50 50 50 44 40 36 26 24 20 14 10 4 4 4 4 800
Refill 6 8 8 8 10 10 10 10 8 8 8 6 100
Band kit distribution – each kit contains half rights and half lefts.
Introductory 2 2 2 2 2 2 4 4 6 6 6 8 10 10 10 10 12 12 12 10 10 10 8 8 6 6 6 4 4 2 2 2 200
Professional 2 2 4 4 6 6 8 8 10 14 14 16 20 20 24 24 26 26 24 24 20 20 18 14 12 10 8 6 4 2 2 2 400
Master 4 4 6 6 10 10 12 18 24 28 32 34 40 44 48 50 50 50 50 50 44 40 36 26 24 20 14 10 4 4 4 4 800
Refill 6 8 8 8 10 10 10 10 8 8 8 6 100
Trial kit treats 25 patients, Introductory kit/50 patients, Professional kit/100 patients, Master kit/200 patients, Refill kit/35 patients.
BANDS & CROWNS SECTION 5PAGE 7
Ormco Bicuspids
Upper Bicuspid Universal Kits Total
Bands
Band Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Trial 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 6 6 6 6 4 4 4 4 2 2 2 2 2 2 2 100
Introductory 2 2 2 2 2 2 4 4 6 6 6 8 10 10 10 10 12 12 12 10 10 10 8 8 6 6 6 4 4 2 2 2 200
Professional 2 2 4 4 6 6 8 8 10 14 14 16 20 20 24 24 26 26 24 24 20 20 18 14 12 10 8 6 4 2 2 2 400
Master 4 4 6 6 10 10 12 18 24 28 32 34 40 44 48 50 50 50 50 50 44 40 36 26 24 20 14 10 4 4 4 4 800
Refill 6 8 8 8 10 10 10 10 8 8 8 6 100
Introductory 2 2 2 2 2 2 4 4 6 6 6 8 10 10 10 10 12 12 12 10 10 10 8 8 6 6 6 4 4 2 2 2 200
Professional 2 2 4 4 6 6 8 8 10 14 14 16 20 20 24 24 26 26 24 24 20 20 18 14 12 10 8 6 4 2 2 2 400
Master 4 4 6 6 10 10 12 18 24 28 32 34 40 44 48 50 50 50 50 50 44 40 36 26 24 20 14 10 4 4 4 4 800
Refill 6 8 8 8 10 10 10 10 8 8 8 6 100
Professional 2 4 4 6 10 14 16 20 24 26 28 32 32 30 28 26 24 20 14 12 8 6 4 2 2 2 2 2 400
Master 4 8 10 14 20 28 36 38 46 52 56 64 64 60 58 52 44 40 28 24 16 12 10 6 4 2 2 2 800
Band kit distribution – each kit contains half rights and half lefts.
UltiMAX
Maximum-Retention Molars
An alternative to crowns, the sturdy design is 100% thicker than standard bands and 40% thicker than other reinforced
bands, delivering the unparalleled strength required for use with Class II appliances. Plus, UltiMAX offers all the known
benefits of bands versus crowns:
• More aesthetic.
• Easier to place, remove and clean up.
• More hygienic and comfortable with less gingival irritation.
Introductory 2 2 2 2 2 2 4 6 8 10 10 12 12 12 12 12 12 12 12 12 10 10 8 6 4 4 200
Professional 4 4 4 4 4 4 8 12 16 20 20 24 24 24 24 24 24 20 24 24 20 20 16 12 8 8 400
Master 6 6 6 6 8 10 16 24 32 40 40 50 50 50 50 50 50 40 50 50 40 40 32 24 10 10 800
Refill 4 6 8 10 10 12 12 10 10 8 6 4 100
Band kit distribution – each kit contains half rights and half lefts.
Archwires
page 2 Wire Stiffness Comparison Guide
page 3 Kleen Pak Wire Dispenser
page 4 Alloys
page 8 Damon Arch Form
page 10 Orthos Arch Form
page 13 Broad Arch Form
page 17 Vari-Simplex & Teardrop Looped
Arch Forms
page 18 Tru-Arch Arch Form
page 24 Standard Arch Form
page 26 Lingual Arch Form
page 27 Straight Length Wire
page 28 Reverse Curve Wire
SECTION 6 PAGE 2 ARCHWIRES
Copper Ni-Ti
®
Copper Ni-Ti®
Copper Ni-Ti wires consist of nickel,
titanium, copper and chromium.
The addition of copper to the alloy
enhances the thermal-reactive prop-
erties of the wire. Ormco offers four
different Copper Ni-Ti series: Damon
Copper Ni-Ti and 27°C, 35°C, and
40°C Copper Ni-Ti. The higher the
temperature transition (TTR), the
lower the relative forces delivered
by the wire. The Copper Ni-Ti series
provides a wide range of options in
selecting and delivering the force of
choice and the wire size for the
dictates of the case and treatment
modality.
• Unloading (springback) properties
facilitate fast, efficient tooth move-
ment.
• Due to the lower hysteresis of
Copper Ni-Ti, the loading forces
are smaller than their nickel-
titanium counterparts, making
wire engagement in the bracket
slot easier.
• A unique unloading profile pro-
vides continuous forces, even
at very small deflections
(Fig. 1).
“New alloys, geared to generate biologically consistent forces, • More resistant to permanent defor-
enable the clinician to provide controlled and predictable mation than other nickel-titanium
tooth movement. Copper Ni-Ti demonstrates precise wires.
transformation temperature control, is more resistant to • Batch-to-batch consistency, with a
very precise temperature range,
permanent deformation and exhibits a smaller drop in unloading force
ensures true heat activation and
than other nickel-titanium alloys. By applying the principles of variable consistent, predictable results
transformation temperature orthodontics with Copper Ni-Ti, (Fig. 2).
I am able to control tooth movement in my practice more efficiently.” • Easy to engage, even in the most
– Rohit C. L. Sachdeva, BDS, M Dent Sc severe cases.
ARCHWIRES SECTION 6 PAGE 5
TMA
® “Nothing could be more basic to our
science than the control of space.
Quite simply, in order to align teeth,
we are first concerned with making
enough space to fit them all in, then
we close what is left over after we
Space Closure in the Age of have aligned them. One can easily
• Initial Stage – TMA is recommended for tooth alignment, space closure value to any practitioner. For this
and curve of Spee. Ormco offers preformed Reverse Curve TMA and Reverse one wire can offer tremendous
Curve TMA with “T” Loops. efficiency of time and force
• Intermediate Stage – TMA is recommended for early torque control with utilization.”
moderate forces. TMA also provides complete manipulation of the wire for
– M. Alan Bagden, DMD
dimensional control. Indications include use as an ideal retraction arch while
exerting more-constant moderate forces over a longer period of time.
• Final Stage – TMA is used as a detailing wire with moderate force.
Ormco’s trademark nickel-titanium wire, Ni-Ti has the Ormco stainless steel wires are made of 300 series alloys to
resiliency and high springback necessary during treat- high tensile strengths in excess of 300,000 psi. The wires
ment. Ni-Ti is indicated for initial leveling, aligning and are manufactured to the highest quality for dimensional
rotational control. precision and surface finish, providing optimum forces for
arch stability, resilience, formability and
sliding mechanics.
Turbo Wire ™
D-Rect
®
Turbo Wire is a nine-strand rectangular braided Ni-Ti,
with low stiffness and great flexibility. Turbo Wire is
recommended as an initial wire to unravel and level
while controlling torque and engaging brackets fully. It D-Rect is an eight-strand braided stainless steel wire. It can
is also effective as a finishing wire, retaining torque but be used throughout treatment where lighter forces with
allowing vertical elastic use. dimensional control are indicated.
Triple Flex ™
Titanium Niobium FA
(Finishing Archwire)
Titanium Niobium FA is an innovative archwire
designed for precision tooth-to-tooth finishing. The ®
unique metallurgical properties of Titanium Niobium
FA make it a precision intraoral detailing option. At
80% of the stiffness of TMA, it is perfect for holding
Respond
bends, yet light enough not to override the arch-to- Respond is a stainless steel coaxial wire. It is recommended
arch relationship. It is recommended for use with fin- as an initial archwire to level and align because of its light,
ishing elastics and even though it feels soft and pliable, gentle forces. Respond is also very flexible and possesses
it possesses a resiliency after bending that is equal to great springback characteristics. One of the benefits
stainless steel. of Respond includes great control with larger
initial wire diameters.
.014 205-1902
Ni-Ti®– Pre-Torqued
Superb wires for division 2 cases where intrusion and Stainless Steel
additional torque are indicated. Wires have 20º of Wire Size
anterior torque built in at 34 mm and 38 mm lengths.
Damon Part Number
Reverse Curve .016 x .025 227-1067
ORTHOS ARCH
Upper – Large
ORTHOS ARCH
Lower – Large
Copper Ni-Ti®
27°C
Copper Ni-Ti®
35°C
Arch Form Wire Size
Orthos – No Dimple .016 .018 .017 x .017 .020 x .020 .016 x .022 .017 x .025 .019 x .025 .021 x .025
Upper Small 219-4203 219-4204 219-4209 219-4211 219-4208 219-4210 219-4212 219-4213
Lower Small 219-4103 219-4104 219-4109 219-4111 219-4108 219-4110 219-4112 219-4113
Upper Large 219-4403 219-4404 219-4409 219-4411 219-4408 219-4410 219-4412 219-4413
Lower Large 219-4303 219-4304 219-4309 219-4311 219-4308 219-4310 219-4312 219-4313
Orthos – Dimple
Upper Small 219-7311 219-7315
40°C
Arch Form Wire Size
Orthos .016 x .022 .017 x .025 .019 x .025 .021 x .025
Upper Small 219-5208 219-5210 219-5212 219-5213
Ni-Ti®
Arch Form Wire Size
Orthos .016 .018 .016 x .022 .017 x .025 .019 x .025
Upper Small 219-3203 219-3204 219-3208 219-3210 219-3212
Titanium Niobium FA
Arch Form Wire Size
Orthos .016 x .022 .017 x .025 .019 x .025
Upper Small 219-8208 219-8210 219-8212
Stainless Steel
Round
Arch Form Wire Size
Orthos .016 .018 .020
Upper Small 219-1570 219-1571 219-1572
Rectangular
Arch Form Wire Size
Orthos .016 x .022 .017 x .025 .018 x .025 .019 x .025 .021 x .025
Upper Small 219-1208 219-1210 219-1211 219-1212
BROAD ARCH
Upper – Small
BROAD ARCH
Lower – Large
BROAD ARCH
Lower – Small
35°C
Arch Form Wire Size
Broad .016 .018 .017 x .017 .020 x .020 .016 x .022 .017 x .025 .019 x .025 .021 x .025
Upper Small 205-0064 205-0068 210-0921 210-0927 210-0922 210-0923 210-0925 210-0926
Lower Small 205-0066 205-0070 211-0921 211-0927 211-0922 211-0923 211-0925 211-0926
Upper Large 205-0065 205-0069 210-0931 210-0937 210-0932 210-0933 210-0935 210-0936
Lower Large 205-0067 205-0071 211-0931 211-0937 211-0932 211-0933 211-0935 211-0936
40°C
Arch Form Wire Size
Broad .016 x .022 .017 x .025 .019 x .025 .021 x .025
Upper Small 210-0942 210-0943 210-0945
Ni-Ti®
Arch Form Wire Size
Broad .014 .016 .018 .020 .0175 x .0175 .016 x .022 .017 x .025 .018 x .025 .019 x .025
Upper Small 205-0009 205-0001 205-0003 205-0013 210-0501 210-0502 210-0503 210-0504 210-0505
Lower Small 205-0011 205-0005 205-0007 205-0015 211-0501 211-0502 211-0503 211-0504 211-0505
Upper Large 205-0010 205-0002 205-0004 205-0014 210-0511 210-0512 210-0513 210-0514 210-0515
Lower Large 205-0012 205-0006 205-0008 205-0016 211-0511 211-0512 211-0513 211-0514 211-0515
.017 x .025
Upper Small 210-4403 210-5403
.019 x .025
Upper Small 210-4404 210-5404
Packs of 5
* Pack of 20
Rectangular
Arch Form Wire Size
Broad .016 x .022 .017 x .025 .018 x .025 .019 x .025 .021 x .025
Upper Small 210-0701 210-0702 210-0703 210-0704 210-0705
Square
Arch Form Wire Size
Broad .016 x .016
Upper Small 210-0706
40 mm 206-0073 207-0072
™
TMA Vari-Simplex 42 mm 206-0074 207-0073
44 mm 206-0075 207-0074
Arch Form Wire Size
46 mm 207-0075
Alexander .016 x .022 .017 x .025 .019 x .025
Kit 206-0076 207-0076
Upper 207-0045 207-0048 207-0063
Packs of 5
Lower Small 207-0043 207-0046 207-0061 Arch Distribution in Kits
*Loops distal to laterals.
Lower Large 207-0044 207-0047 207-0062 **Loops distal to cuspids. Upper Lower
Size Qty. Size Qty.
34 mm 6 36 mm 6
TRU-ARCH
Upper – Small
TRU-ARCH
Lower – Small
ARCHWIRES SECTION 6 PAGE 19
Copper Ni-Ti®
27°C
Arch Form Wire Size
Tru-Arch – No Dimple .014 .016 .018 .014 x .025 .016 x .022 .016 x .025 .017 x .025 .019 x .025
Upper Small 205-6201 205-6202 205-6203 210-9101 210-9103 210-9102 210-9104 210-9105
Lower Small 205-6101 205-6102 205-6103 211-9101 211-9103 211-9102 211-9104 211-9105
Upper Large 205-6401 205-6402 205-6403 210-9201 210-9203 210-9202 210-9204 210-9205
Lower Large 205-6301 205-6302 205-6303 211-9201 211-9203 211-9202 211-9204 211-9205
Tru-Arch – Dimple .014 .016 .018 .014 x .025 .016 x .022 .016 x .025
Upper Small 205-6221 205-6222 205-6223 210-9121 210-9123
Lower Small 205-6121 205-6122 205-6123 211-9121 211-9123 211-9122
Upper Large 205-6421 205-6422 205-6423 210-9221 210-9223 210-9222
Lower Large 205-6321 205-6322 205-6323 211-9221 211-9223 211-9222
Tru-Arch – Stops .014
Upper Large 227-1360
Lower Large 227-1361
35°C
Arch Form Wire Size
Tru-Arch – No Dimple .016 .018 .020 .016 x .022 .017 x .017 .017 x .025 .019 x .025 .020 x .020
Upper Small 205-6212 205-6213 210-9113 210-9111 210-9114 227-1331 210-9112
Copper Ni-Ti®
40°C
Arch Form Wire Size
Tru-Arch .019 x .025 .021 x .025
Upper Small 227-1401* 227-1411*
Lower Small 227-1403* 227-1413*
Upper Large 227-1402* 227-1412*
Lower Large 227-1404* 227-1414*
D-Rect®
Arch Form Wire Size
Tru-Arch .017 x .025 .021 x .025
Upper Small 227-1801* 227-1811*
Lower Small 227-1803* 227-1813*
Upper Large 227-1802* 227-1812*
Lower Large 227-1804* 227-1814*
*Under development.
ARCHWIRES SECTION 6 PAGE 21
Align™
Align nickel-titanium archwires come with the option of a permanent vertical
midline “dimple” that prevents archwire “walking” and eliminates the need to
cinch the archwire behind the buccal tube.
Align SE 200
Arch Form Wire Size
Tru-Arch – No Dimple .014 .016 .018 .020
Upper Medium 227-3152 227-3154 227-3156 227-3158
Tru-Arch – Dimple
Upper Medium 227-3151 227-3153 227-3155 227-3157
Lower Medium 227-3108 227-3110 227-3112 227-3116 227-3118 227-3657 227-3122 227-3656
Tru-Arch – Dimple
Upper Medium 227-3677 227-3135 227-3137 227-3679 227-3141 227-3143 227-3678 227-3145
Lower Medium 227-3674 227-3109 227-3111 227-3676 227-3115 227-3117 227-3675 227-3121
Align XF ™
Align XF
Arch Form Wire Size
Tru-Arch – No Dimple .012 .014 .016 .018
Upper Small 227-3640 227-3379 227-3383 227-3387
Tru-Arch – Dimple
Upper Small 227-3393 227-3377 227-3381 227-3385
Tru-Arch – Dimple
Upper Small 227-3324 227-3328 227-3332 227-3340 227-3344 227-3352
Stainless Steel
Round
Arch Form Wire Size
Tru-Arch .014 .016 .018 .020
KEYHOLE LOOPED (2)
Upper Small 227-9042 227-9043 227-9044 227-9154
Rectangular
Arch Form Wire Size
Tru-Arch .016 x .022 .017 x .025 .018 x .025 .019 x .025 .021 x .025 .022 x .028
Upper Small 227-9045 227-9047 227-9049 227-9050 227-9052 227-9054
Square
Arch Form Wire Size
Tru-Arch .016 x .016
Upper Small 227-9055
Lower
22 mm 227-7003
24 mm 227-7008
26 mm 227-7013
28 mm 227-7016 227-7018
30 mm 227-7024 227-7023
Bulk packs of 10
Arch Form
STANDARD ARCH
The standard arch blank is available in a number of Ormco Lower
archwires. It minimizes adjustment and trimming and elimi-
nates excess chairside procedures.
ARCHWIRES SECTION 6 PAGE 25
TMA – Low-Friction
Arch Form Wire Size
Standard .017 x .025 .019 x .025
Upper 202-1007 202-1008
Stainless Steel
Round Square
Arch Form Wire Size Arch Form Wire Size
Standard .014 .016 .018 .020 Standard .016 x .016 .017 x .017
Upper* 206-0014 206-0016 206-0018 206-0020 Upper 208-1616 208-1717
Lower* 207-0014 207-0016 207-0018 207-0020 Lower 209-1616 209-1717
* Pack of 20
Rectangular
Arch Form Wire Size
Standard .016 x .022 .017 x .022 .017 x .025 .018 x .022 .018 x .025 .019 x .025
Upper 208-1622 208-1722 208-1725 208-1822 208-1825 208-1925
D-Rect
Arch Form Wire Size
Standard .016 x .022 .017 x .025 .018 x .025 .019 x .025 .021 x .025
Upper 201-0001 201-0002 201-0003 201-0004 201-0005
Respond
Arch Form Wire Size
Standard .015 .017 .019
Standard Arch 203-1115 203-1117 203-1119
Lingual Archwires
Wire Type Wire Size
Lingual .013 .014 .0155 .016 .0175 .018 .016 x .016 .016 x .022 .0175 x .0175 .017 x .025 .018 x .025
Respond 203-0006 203-0007
D-Rect 201-0023
Social 6 205-1950
Ni-Ti ®
Copper Ni-Ti®
Arch Size Wire Size 35°C
Lingual .016 .018 Arch Size Wire Size
Upper 1 205-0025 205-0026 Lingual .017 x .017 .017 x .025
Upper 2 205-0023 205-0024 Upper 1 205-0076 205-0086
Stainless Steel
Upper 232-0001
Lower 232-0010
Straight Length .016 .018 .0175 x .0175 .016 x .022 .017 x .025 .019 x .025
Straight Length .016 x .016 .016 x .022 Straight Length .015 .017
14" Straight 264-0150 264-0175
14" Straight 266-0050 266-0051
Package Qty 50 50 40 40 40 30 30 20 20 20 20
Rectangular
Wire Size
Straight Length .016 x .022 .017 x .022 .017 x .025 .018 x .022 .018 x .025 .019 x .025 .021 x .025
14" Straight 254-1622 254-1722 254-1725 254-1822 254-1825 254-1925 254-2125
Square
Wire Size
Straight Length .016 x .016
14" Straight 252-1616
Packs of 5
All wires are packaged in Kleen Paks™of 10 unless otherwise noted.
1
U.S. Patent No. 5,131,843
Section
Seven
Adhesives,
Curing Lights
page 2 Enlight & Enlight LV
–
page 3 Blugloo & System 1+
–
page 4 Grengloo
page 5 Gel Etch, Ortho Solo & Liquid Etch
page 6 OptiBand Ultra & OptiBand
page 7 Protech/Protech Gold, Primer,
Mixing Slab Covers & Instructions
page 8 Demi Ortho Light
page 9 Optilux 501
page 10 Demetron Accessories & Parts
SECTION 7 PAGE 2 ADHESIVES & CURING LIGHTS
Strong
• Quick-cure polymerization provides greater sheer bond
strength at initial force loading
• Chemical affinity for metal brackets ensure more reliable
bond strength Working Time (seconds) Sheer Bond
under 10,000 lux Strength (lbs)†
Flexible
• 185% more working time than other light cure adhesives
allow for better placement
• Patented formula delivers up to 118% more impact
resistance for reduced emergency visits
Gel Etch
Conveniently packaged in two 5 cc syringes, Gel Etch
provides an easily applied alternative to traditional etching
procedures. Disposable syringe tips are included to provide
a contamination-controlled environment between patients.
Gel Etch Kit 740-0150
Contains:
Syringes (two 5 cc)
Disposable Syringe Tips (25)
Syringe (one 5 cc) 740-0133
Disposable Syringe Tips (25) 740-0134
System
Each Ortho Solo Stick contains enough sealant/bond
enhancer for one arch, making everyday bondings faster and
Sealant and Bond Enhancer easier than ever before. Simply push the Ortho Solo Stick
Ortho Solo® is a universal sealant and bond enhancer. With into the sealant well to access the bond-enhancing solution,
light-cure and paste-paste systems, Ortho Solo replaces the pull the stick out and immediately apply the liquid to the
sealant. With no-mix chemical cure systems, Ortho Solo tooth. No air-dry or light-cure steps needed.
should be used in addition to the activator for best results.
Consistent and accurate dosage minimizes product waste.
Ortho Solo incorporates a bond-enhancing property that Unidose delivery reduces the risk of cross contamination and
improves adhesion to the tooth at the adhesive interface, offers a cleaner presentation to your patients. A tightly sealed
hence reducing bond failures. The glass filler, unique to container ensures that there is no harmful exposure to light
Ortho Solo, acts as a stress and shock absorber, preventing and no risk of product evaporation.
cracks that can lead to bond failures. Box of 10 Sticks (1.2 ml total) 740-0269
OptiBand Ultra
™
OptiBand ™
Band Cement
OptiBand is a resin-based Bis-GMA band cement
formulated to save doctor and assistant time, both at
banding and throughout the course of treatment.
Cement
With more features than any other band cement on the
market, OptiBand Ultra is the only choice for reliable and
convenient banding.
• Quick-Setting, Single-Paste, Light-Cure Formula
means no more mixing and no more mess
• Disposable Tips allow application directly into the band
for no waste and reduced risk of cross contamination
• Unique Chemistry includes adhesion boosters for
added reliability
• Optional Blue Color makes cleanup of excess adhesive
easy at both banding and debanding appointments
5 Syringes – Tooth Colored (9 g total, 10 tips) 740-0291
10 Syringes – Tooth Colored (18 g total, 20 tips) 740-0292
5 Syringes – Blue Colored (9 g total, 10 tips) 740-0293
10 Syringes – Blue Colored (18 g total, 20 tips) 740-0294
Tip Refill (50 tips) 740-0295
ADHESIVES & CURING LIGHTS SECTION 7 PAGE 7
Protech/Protech Gold
Glass Ionomer Cement
Protech™ glass ionomer band cement
is the first product of its type specifically
formulated for orthodontic banding.
Unlike conventional cements, Protech
bonds to enamel and stainless steel to
provide exceptional band retention.
In addition to improved
retention,the incidence of
microleakage and the likelihood
Primer
of cement washout is virtually
eliminated due to the material’s extremely low solubility and
high compressive strength. Porcelain Primer
Introductory Kit (white) 740-0155 Porcelain Primer permits bonding versatility with patients
Introductory Gold Kit 740-0255 having bridgework or crowns. May be used with all metal,
Both kits contain: ceramic or plastic brackets. Complete instructions are
Cement Powder (30 g)
included.
Cement Liquid (15 ml)
Measuring Scoop Bottle of 12 cc 740-0012
Instruction Sheet
Standard Kit (white) 740-0156
Contains:
White Cement Powder (240 g)
Cement Liquid* (120 ml)
Dispensing Bottle (empty)
740-1151
740-0153 Mixing Slab Covers
Measuring Scoops (2)
Instruction Sheet Mixing cement directly on the surface of the aluminum
Standard Gold Kit 740-0256 slab is not recommended. Ormcoat and Teflon* slab covers
Contains: are available. The easy-to-clean Ormcoat cover may be reused
Gold Cement Powder (240 g) 740-0251
Cement Liquid* (120 ml) 740-0153
for as many as 20 mixes. The Teflon cover is more permanent.
Dispensing Bottle (empty) Covers are easily replaced when necessary.
Measuring Scoops (2) Teflon Cover (1 pair) 770-0010
Instruction Sheet Ormcoat Cover Refills (50 sheets) 770-0020
* Cement liquid is the same part for Protech and Protech Gold. * Teflon is a registered trademark of DuPont.
Instructions
All Ormco chemical products come with complete instructions
for use. Instructions may be reordered as follows:
Technique Card Instruction Booklet
–
Blugloo 070-5111 070-5471
Enlight 070-0432 070-5298
Enlight LV 070-0431 070-5297
OptiBand n/a 070-0462
OptiBand Ultra n/a n/a
Ortho Solo 070-0440 070-0441
Plastic Bracket Primer n/a 070-0471
Porcelain Primer n/a 070-0073
System 1+ n/a 069-0000
Bonding Booklet n/a 070-5287
Engineered with Demetron expertise, the leading manufacturer of curing lights, the Demi Ortho is designed to specifically suit
the needs of the Orthodontist. This sleek L.E.D. curing light employs a unique wavelength that optimally cures orthodontic
materials, providing enhanced performance and consistent cures. The Demi Ortho allows you to focus on what’s truly
important—your practice.
Faster Cures Without Excess Heat**
• Lightweight and Ergonomic – Sleek, compact and portable, Pulsing Power of PLS
just 5.5 oz. measuring 9.25" x 1.2" with multiple holding
options to reduce hand and arm stress.
• Interchangeable Lithium Ion Battery – One full charged
OUTPUT mW/cm 2
battery yields 3 to 4 days working time.
• 8-minute Sleep Mode – Maximizes battery life and optimizes
workflow.
• Shorter Curing Times – Periodic Level Shifting (PLS) keeps
cure times at a minimum without excess heat.
• Multiple Curing Time Selections. – 5-, 10- and 20- second
preset time settings reflect short curing times.
• Light Guide Options – Accommodates alternate Demetron
light guides. TIME IN SECONDS
Protective
Light Shield Protective Glasses
707-0008
707-0007
Handpiece Without
Light Guide
707-0035
Section
Eight
Strength 2 oz/60 g 3 oz/85 g 3.5 oz/100 g 4.5 oz/130 g 6 oz/170 g 8 oz/230 g 14 oz/400 g
1/8"
3.18 mm Hummingbird Chipmunk
630-0010 630-0030
3/16"
4.76 mm Quail Otter Rabbit Kangaroo Impala Cougar
630-0011 630-0020 630-0031 630-0040 630-0050 635-0058
1/4"
6.35 mm
Owl Seal Fox Bear Ram Leopard
630-0012 630-0021 630-0032 630-0041 630-0051 635-0059
5/16"
7.94 mm
Parrot Dolphin Penguin Zebra Moose Panther Walrus
630-0013 630-0022 630-0033 630-0042 630-0052 635-0060 635-0065
3/8"
9.35 mm
Road Runner Turtle Monkey Camel Buffalo Tiger Elephant
630-0014 630-0023 630-0034 630-0043 630-0053 635-0061 635-0066
1/2"
12.7 mm
Peacock Donkey Lion Whale
630-0015 630-0035 635-0062 635-0067
5/8"
15.9 mm
Eagle Llama
630-0016 630-0036
3/4"
19.1 mm
Ostrich Giraffe
630-0017 630-0037
ELASTICS & POWER PRODUCTS SECTION 8 PAGE 5
Quail 630-0011
Owl 630-0012
Parrot 630-0013
Peacock 630-0015
Eagle 630-0016
Ostrich 630-0017
Medium – 3 oz
Otter 630-0020
Seal 630-0021
Dolphin 630-0022
Turtle 630-0023
Donkey 630-0035
Llama 630-0036
Giraffe 630-0037
Zebra 630-0042
Camel 630-0043
Heavy – 14 oz Headgear
Walrus 635-0065 634-0012
Elephant 635-0066
Intraoral/Noncompliance
page 2 AdvanSync 2
page 3 VectorTAS Temporary Anchorage System
page 4 Standard Bite Jumper
page 5 Bite Fixer & Bite Turbos
page 6 Wick Flat Bow Retainer & Wick Lip Bumper
page 7 Orthos Lip Bumper & Q.C.M. Retainer
page 8 Quick Nance, Preformed TMA Pendulum Springs & Coil Springs
page 10 Pletcher Springs, Tie Hooks, Power Pins & Ligature Wires
page 11 Arch Hooks, Stops, Spacers & Lingual Retainers
page 12 Precision Lingual Hinge Cap & Lingual Attachments
page 14 Sheaths
SECTION 9 PAGE 2 INTRAORAL/NONCOMPLIANCE
AdvanSync 2
™
AdvanSync 2
An evolution in Herbst®*Class II therapy, AdvanSync 2 is
designed to advance the mandible to a Class I occlusion in
as little as six to nine months – while having the ability to
bond upper and lower 5 to 5. AdvanSync 2 eliminates the
need for patient compliance and provides maximum
comfort and range of movement and is ideal for patients in
mixed or permanent dentition. AdvanSync 2 was developed
in collaboration with one the of the world’s leading Class II
authorities, Dr. Terry Dischinger.
• Electropolished rods with radiused corners and electro- Upper First Molar Crowns
polished internal sleeves for smoother operation UL-Size 4 600-4204
• Reinforced Spiralock™ threading for maximum UL-Size 5 600-4205
UL-Size 6 600-4206
screw engagement
UL-Size 7 600-4207
• Hygienic open-ended cap prevents food/debris build-up UR-Size 4 600-4214
• Upper and lower dual hole casing to enable customized UR-Size 5 600-4215
activation for greater treatment versatility UR-Size 6 600-4216
• Featuring 16% larger lumens with radiused internal UR-Size 7 600-4217
edges for more freedom of lateral movement resulting
Lower First Molar Crowns
in smoother opening and closing of the mechanism LL-Size 4 600-4224
LL-Size 5 600-4225
AOA’s expert lab technicians fully customize AdvanSync 2 LL-Size 6 600-4226
appliances to each doctor’s specific preferences and needs. LL-Size 7 600-4227
LR-Size 4 600-4234
Please refer to Section 12 Page 4 for more information.
LR-Size 5 600-4235
LR-Size 6 600-4236
LR-Size 7 600-4237
1 mm Spacers 600-4271
2 mm Spacers 600-4272
4 mm Spacers 600-4273
Extenders 600-4278
Casing 600-4280
AdvanSync’s arms are half the size of those in traditional 6.5mm Rectangular Tube 600-4281
Hex Key .050 (for screws) 600-4290
Herbst ®* appliances for greater patient comfort. AdvanSync also
Hex Key .094 (for extenders) 600-4291
sits further back in the mouth and is virtually unnoticeable. Instructions 070-5672
VectorTAS
™
Retromolar Area
Infrazygomatic Crest
SBJ
™
Components
Spacers 1 mm (10/pk) 600-1001
Spacers 2 mm (10/pk) 600-1002
Spacers 3 mm (10/pk) 600-1003
Spacers 4 mm (10/pk) 600-1004
Hex-Head Screws (10/pk) 600-1006
Hex-Head Screws/Casing Assembly (5/pk) 600-1007
Hex Key (2/pk) 600-1011
Straight Rod (10/pk) 600-1012
Left Sleeve (10/pk) 600-1013
Right Sleeve (10/pk) 600-1014
Offset Rod (10/pk) 600-1015
Hex-Head Screw/Curved Base Casing (10/pk) 600-1016
Hex-Head Screw – 5.5 mm (10/pk) 600-1017
• Improved material and reinforcement • Bite Turbos can be placed on the lingual
ensure more-efficient performance, with of upper or lower anteriors. One to four
greatly reduced breakage problems. may be placed.
• The crimpable lower attachment is much • Occlusal table is horizontal and places
simpler to place. no distal force on the mandible/maxilla.
Noncompliance treatment • Polyurethane tubing prevents the spring • Easy removal with the ETM Lingual
from becoming a food trap. Debonding Plier (Part No. 800-0431).
approaches are gaining
• Minimum order of 10.
increasing acceptance as the Bite Fixer 10-Patient Kit 600-2000 Bite Turbos 350-0000
preferred way to achieve Contains:
Size 3 Left (3) Size 3 Right (3) “Bite Turbos do more than allow more-
clinical goals without Size 4 Left (4) Size 4 Right (4)
Size 5 Left (3) Size 5 Right (3) rapid lower placement. They can increase
relying on patient
Ball Stops (20) lower facial height. They also deprogram
performance. The list of Metal Pins (20)
Rulers (10) the musculature to allow the mandible
noncompliance options from
Patient Information Cards (10)
to achieve a more-relaxed rest (freeway)
Ormco include the Bite
Components position, so detailing of the occlusion
Fixer, Bite Turbos and
Size 3 Left 600-2003 orthodontically will be less iatrogenic…
Pendulum appliance. And Size 3 Right 600-2013
Size 4 Left 600-2004 We have found the simplicity and ease of
the CBJ and SBJ bite-
Size 4 Right 600-2014
application of the Bite Turbos allow us to
jumping appliances provide Size 5 Left 600-2005
Size 5 Right 600-2015 offer more-rapid delivery of quality care
a new approach to Ball Stops (10/pk) 600-2010
Metal Pins (10/pk) 600-2011 and shorter treatment times.”
traditional Herbst* therapy.
Rulers (10/pk) 600-2009 – Joe H. Mayes, DDS, MSD
Patient Information Cards (10) 070-0444
Lip Bumper
Sizing Guides (10/pk) 760-0044
Sizing Chart
39 mm or less Size 1
39 mm – 43 mm Size 2
43 mm – 46 mm Size 3
Q.C.M. Retainer
46 mm – 48 mm Size 4
48 mm or more Size 5
Traditional Retainer
Cuspid Retraction
Eyelets are hooked on a free-sliding crimp hook placed
mesial to the cuspid or on a Hemi-Hook of the cuspid
bracket. If desired, a crimpable stop can be placed on the
archwire to control the amount of retraction.
Anterior Retraction
Crimpable sliding hook used as tie-back is placed distal to
the lateral incisor. Eyelets are hooked onto the crimp hook
Preformed TMA and first molar buccal tube hook to activate retraction.
Coil Springs
Chrome Alloy Coil Springs Align Nickel-Titanium Coil Springs
™
High-spring properties are ideally suited for orthodontic These springs require less wire than stainless steel to
use. An .030" coil I.D., in two-foot length, packaged in a deliver the necessary forces while minimizing tooth
convenient plastic dispenser. trauma and patient discomfort. The springs are designed
Closed Coil Spring for efficient tooth movement, better sliding mechanics and
.008 x .030 222-0830 better oral hygiene.
.009 x .030 222-0930
.010 x .030 222-1030
Kobayashi Ready-to-Use
Auxiliary Tie Hooks
Quickly tied in place in the same manner as a standard
ligature wire. Made from easily adaptable .012, .014 or .016
ligature wire. Wires are spot-welded together to form a Teflon * Coated Ligature Wires
®
Precision Lingual ™
Lingual Attachments
Hinge Cap Easy-Threading Eyelets
Comfortable for patients. Packaged in convenient strip form.
Minimum order of 100 loose or 10 direct bond pads.
Flat – Loose or Prewelded 612-0001
Flat – Direct Bond Pad 300-0091
Curved – Direct Bond Pad 300-0090
Sheaths
Mesial Offset Sheaths Sheath with Window
Ormco’s Mesial Offset Sheath was specifically designed for One-piece cast lingual sheaths have a short base mesio-
maximum patient comfort and ease of use. The 6° mesial distally for better adaptation to either first or second molar
offset assists in insertion and removal of transpalatal bars. bands. Low profile, rounded contours for greater patient
Pack of 10 comfort; integral, cast and maleable hook. Fits both lefts or
.036 Right, 6° Mesial Offset UR/LL 678-3672 rights.
.036 Left, 6° Mesial Offset UL/LR 677-3672 Pack of 25
.036 with Hooks 704-4012
Lingual Sheaths
Minimum order of 10.
With Short 2.2 mm Ball Hook
.036 Sheath UL/LR, Distogingival 676-3671
.036 Sheath UR/LL, Distogingival 675-3671
.036 Sheath UL/LR, Mesiogingival 676-3673
.036 Sheath UR/LL, Mesiogingival 675-3673
Extraoral
Appliances
page 2 AD & Asian Profile
Protraction Facemasks
page 3 Brite-Gear
page 4 SR, SRX & A+ Facebows
SECTION 10 PAGE 2 EXTRAORAL APPLIANCES
AD Protraction Facemask
Developed by Dr. Fernando Morales the AD Protraction Facemask
is designed with patient compliance in mind. The AD (Adjustable
AD Protraction Facemask
Dynamic) Protraction Facemask provides dynamic movement in Blue Facemask 716-0001
Lavender Facemask 716-0002
the forehead rest while allowing the chin cup to slide vertically Chin and Forehead
along the main frame. This means maximum patient comfort Replacement Pads (3) 716-0003
Hex Key 716-0004
while sleeping, talking, or anytime the jaw is moving. And since
the movement of the softly padded chin cup and forehead rest
involves much less sliding contact with tissue, wearing the AD Asian Profile
Facemask won’t be an irritating experience. Protraction Facemask
Blue Facemask 716-0011
Increased patient compliance means the AD Protraction Facemask Lavender Facemask 716-0012
will be a more efficient treatment option for you in moving the Replacement Pads (3) 716-0005
Hex Key 716-0004
skeletal Class III maxilla forward while stabilizing or retracting
the mandible. It is also effective in closing space and correcting
negative overjet. Ormco’s Whale or Walrus elastics are recom-
mended with the AD Facemask.
• Easily adjusted
• Comfortably worn
• Clinically effective
EXTRAORAL APPLIANCES SECTION 10 PAGE 3
Brite-Gear ®
High-Pull Straps
Package of 10
Black 715-1011
Pink 715-1012
Yellow 715-1013
Complete High-Pull Headgear Kit 715-1010
Contains:
Black Strap
Medium Force Release Modules (2)
Size 4 Omega Loops 200-0204 Mini-Short Outer Bow with Horizontal Hooks
Size 5 Omega Loops 200-0205 Size 3 Omega Loops 200-1243
Size 4
Size 5
Omega Loops
Omega Loops
200-0224
200-0225
200-0234
Facebow
Small Plain 200-0227
Supplies
page 2 Basis Alginate, Bright Trays
page 3 SportsGuard, Toothbrushes, SmoothEase & Patient Wax
page 4 Electrodes, Articulator & Supplies, Utility Wax, Silver Solder &
Orthodontic Soldering Flux
page 5 Retainer Cases, Bonding Seminar Kit
Cephalometric Protractor/Tracing Template & Patient Hand Mirror
page 6 Optiview Lip and Cheek Retractor
SECTION 11 PAGE 2 SUPPLIES
Bright Trays
Disposable Plastic Impression Trays
• Designed specifically for single-patient use.
• Provide new unused trays for the perfect impression
every time.
• Four sizes available for accurate fit and perfect results.
• Excellent patient comfort.
• Great alginate retention due to superior tray
perforations and Rim Lock design.
• No adhesives required.
• Color coordinated by size for easy use.
• Conveniently packaged in bags of 20.
Upper
Size 10 – Purple 714-0041
Size 12 – Pink 714-0042
Size 14 – Blue 714-0043
Size 16 – Green 714-0044
Lower
Size 10 – Purple 714-0051
Dust-Free Alginate
Impression Material
Basis is an easy-to-mix, fast-set, dust-free alginate impression
material that produces impressions with superb detail. Its
dust-free formula minimizes the potential harmful effects
of airborne particles. Patients young and old will enjoy the
fresh cinnamon flavor.
Basis Cinnamon Alginate 6 lb Pack 776-2101
Contains:
6 – 1 lb foil bags
1 water measuring vial 776-2107
1 powder measuring scoop 776-2106
1 canister
Basis Cinnamon Alginate 25 lb Pack 776-2102
Contains:
25 – 1 lb foil bags
1 water measuring vial QUAD™ Box
1 powder measuring scoop Ormco’s all-new QUAD Delivery System makes inventory
1 canister management and case setup easy.
Basis Unflavored Alginate 6 lb Pack 776-2103 • Compact and portable for easy transportation from
Contains:
6 – 1 lb foil bags
chair to chair
1 water measuring vial • Holds up to 50 cases of product
1 powder measuring scoop • Furnished with Identification Stickers to easily
1 canister
label box contents
Basis Unflavored Alginate 25 lb Pack 776-2104
• Product compatible with the Quad Box: Damon System,
Contains:
25 – 1 lb foil bags Prodigy SL, Accent Mini Buccal Tubes, SnapLink Tubes,
1 water measuring vial SL Buccal Tubes, Titanium Tubes, ICE, STb and Damon 7.
1 powder measuring scoop
1 canister PN: 070-0160
SUPPLIES SECTION 11 PAGE 3
SportsGuard ™
SmoothEase ™
Patient Wax
(Not Shown) Individually packaged.
Toothbrushes 757-0001
Travel Toothbrushes
Designed for the orthodontic patient’s use away from home.
Ideally suited for carrying in shirt or purse. Bristle portion
fits into handle, maintaining sanitary condition for contin-
ued use. Available in assorted colors – red, pink, blue, yel-
low and green.
Package of 50 711-0009
Silver Solder
Dead-soft silver solder offers excellent flow action for easy
working. The high silver content has been formulated for
orthodontic chrome alloy use, cadmium free. Packaged in
timesaving 1 dwt plastic container.
.015 Wire 759-0015
.025 Wire 759-0025
Wax Forms
Class I, Crowded 709-0012 Orthodontic Soldering Flux
Class II, Division 1 709-0013
(Not shown) A truly excellent soldering flux made
Class II, Division 2 709-0014
Class III 709-0010 expressly for chrome alloy orthodontic appliances. For
continued excellent results, thin only with distilled water.
Articulator 709-0007 2 oz Jar 759-0002
Plastic Teeth 709-0008
Metal Teeth 709-0016
Utility Wax
(Not shown) Conveniently packaged in a 1 lb box.
757-0004
SUPPLIES SECTION 11 PAGE 5
OptiView ™
Complementary Product
See various sections of this catalog for the following product that complements OptiView.
• Insignia
Section
Twelve
Allesee
Orthodontic
Appliances
page 2 AOA Personal Services page 14 Lingual Indirect Bonding
page 3 Breathe Easy page 15 STb Light Lingual System
page 4 AdvanSync 2 page 16 Archwire Extender
page 5 Miniscope Herbst page 17 Hawley Retainers
page 6 MARA page 18 Spring Retainers
page 7 Distalizers page 19 Positioners
page 8 AOB Appliances page 20 Splints
page 9 TAD Assisted Appliances page 21 Pendulum
page 10 Light Choice Arch Development page 22 Typodont Consultation Models
page 11 Fixed RPE’S
page 12 Removable Functionals
page 13 Labial Indirect Bonding
AOA Laboratory
Your Trusted Source for a Complete
Range of Customized Appliances
Dear Doctor: Allesee Orthodontic Appliances
PO Box 725
For more than 35 years, AOA has set the standard in providing the profession 13931 Spring Street
with a full range of custom-crafted appliances essential to the success of their Sturtevant, WI 53177
practices. We are honored to serve you and welcome the opportunity to
continue meeting your laboratory requirements. PO Box 200
6 Niblick Road
AOA’s senior management and technical team produces not only top quality Enfield, CT 06082
appliances that are returned to you in a timely fashion for a fair and
competitive price, but also continues to teach and cross-train our associates the PO Box 9025
intricate details of manufacturing your appliances. AOA’s mission will never 341 E. First Street
change and we will always strive to exceed your expectations. Calexico, CA 92231
AOA’s state-of-the-art Centralized Communication Center provides accurate Visit our web site at
and actionable user support for all inquiries in a professional manner. For www.aoalab.com
maximum convenience, we have three manufacturing locations: Sturtevant,
Wisconsin; Enfield, Connecticut; and Calexico, California. You may contact the
Center at 800.262.5221 from 7 a.m. until 6 p.m. CST.
AOA has a rich history innovating many orthodontic appliances that are now
commonplace in the profession. Through our comprehensive product line,
commitment to the success of your practice and dedication to the advancement
of the profession, AOA will continue to assist you in setting new standards of
excellence every day you practice.
Thank you for trusting AOA laboratory for your practice and patients.
Sincerely yours,
John Dargis
Vice President Sales and Marketing, AOA John Dargis
General Manager
ALLESEE ORTHODONTIC APPLIANCES SECTION 12 PAGE 3
Breathe Easy ™
Sleep - Snoring
Obstructive sleep apnea (OSA) can be treated in many patients
with the use of a removable dental appliance. The most
common approach is the forward positioning of the mandible
to a “Class III” type relationship to the upper jaw. AOA’s
appliances offer a range of options - all removable. Appliances
can be mechanically attached between upper and lower arches,
or a single unit. All appliances require a healthy dental
environment but can be modified in material choices to
accommodate various considerations such as under-cuts and
potential periodontal problem.
AdvanSync 2 ™
Non-customizable AdvanSync 2 Patient Kit (for 10 patients) and refills are also
available through Ormco. Please refer to Section 9 Page 2.
Instructions 070-5672
Miniscope Herbst ™ ®
MARA
®
Distalizers
It is now possible to distalize maxillary first and second molars
and retain the results with one appliance. The Distal Jet™ is a
fixed lingual appliance that can produce unilateral or bilateral
molar distalization and rotation corrections, usually in four to
nine months, without patient compliance. Nickel-titanium coil
springs (240g) provide forces for predictable results. The
springs are driven by a unique set screw activation lock. After
molars are distalized the Distal Jet™ can be converted into a
Nance holding arch with a few easy adjustments - without
removing the appliance (180g springs are available upon
request).
AOB Appliances
The custom AOB Intrusion Splint is patient specific in design
and made by laminating a special pressure formed plastic base
with orthodontic acrylic. Two transpalatal wires connect the
right and left quadrants for stability, preventing buccal flaring
during treatment. Typically four “ball-hooks” are provided on
each buccal segment for choice in force application.
Light Choice
Arch Development
Light Choice appliances are designed to deliver light force
when phase one expansion is required. From special open coil
springs to titanium alloys, AOA has the right appliance for
your patient.
Spring Jet
ALLESEE ORTHODONTIC APPLIANCES SECTION 12 PAGE 11
Fixed RPE’S
Rapid Palatal Expanders from AOA are available in banded,
stainless steel crown, acrylic, or vinyl pressure-formed styles.
The traditional banded appliance requires bands properly
seated on molars or molars and first bicuspids. The “modified”
design, with bands on only the molars, is the optimal design
for patients with mixed dentition. AOA can provide and seat
either bands or crowns.
Ratchet Snap Lock RPE Standard RPE Four Armed Ex Spider Bonded RPE
Removable Functionals
AOA can provide virtually all of today’s popular functional
appliance designs, from the two arch designs to the single arch
active plates. Special attention is critical for coordination of the
arches for the role acrylic plays in the eruption dynamics and
growth modification. Our technical staff is trained to
understand the important relationship of construction bites
and model articulation in order to obtain the maximum
potential benefits of “Functional Appliances.”
AOA custom art acrylic designs are an essential part of patient Twin Block
cooperation. Just refer to our Acrylic Color Chart for ideas and
choices.
Archwire Extender
The archwire extender is an accessory inserted into the molar
tube to extend the function of the molor tube. This extender
allows the practitioner to place a single rectangular archwire
through the tube and not have it become dislodged during
corrections. The majority of cases use the extender in the
maxillary arch first, then in the mandibular arch as needed. By
using the extender, the operator is still utilizing the light force,
low friction concept to the maximum, and early treatment is
now achievable in cases which traditionally would have
required extractions.
Available in Packages of 10
Order Part Number: 1604-3322
Close-up views
Hawley Retainers
Although AOA fabricates Hawley retainers in many ways, our
most popular method is to use a plaster model that impressions
were taken before debonding the brackets. This method allows
AOA ample time for fabrication, while allowing the patient to
receive their retainers on the day of debonding. Many doctors
have found this method an efficient way to transition from
brackets into retention. Fabrication requires you to take the
impressions right over the brackets and pour the models in
either plaster or stone.
Spring Retainers
AOA’s most popular designs are ideal for correcting minor
incisor irregularities such as rotations and tipping. The Spring
Retainer can also be utilized for passive post orthodontic
retention where severe rotations have been corrected. AOA will
reposition the incisors ideally or as ideal as the malalignment
will allow. If requested AOA will reduce (strip) the contacts of
each or selected incisors to create sufficient space when
constructing the set-up. The appliance is self-activating due to
the changes “programmed” into the construction model by the
set-up. The appliance stretches around the irregular incisors
and coaxes them into position. Over-corrections can be
introduced into the set-up for additional force. TMA may be
substituted for AOA’s special spring wire to accommodate
unusual degrees of correction.
Upper Helix Coil Spring Retainer
A valuable attribute of our designs is that if on occasion the
patient discontinues wearing the appliance for a period of time
the appliance will normally “flex” sufficiently to seat despite
some incisor movement and re-engage the teeth for correction.
Positioners
The positioner has been considered by many clinicians to be
the most complete means of finishing orthodontic treatment.
Combining modern materials and fabrication techniques with
the experience of AOA’s technical staff has advanced the
positioner to a multipurpose appliance. Its reduced wearing
time and light weight mean improved patient cooperation and
a refined finish. Even if the patient doesn’t wear the positioner
as prescribed, the super elastic material will engage and correct
alignment.
Articulated Set-ups
Splints
AOA can process splints in many designs. Images of the most
popular ones are listed here. Specific designs and preferences
can be incorporated into your technical standing instruction
file (TSI).
The critical factor in any splint fabrication is the construction The Damon Retention Splint is perfect for retention of Class II
and III cases in addition to the retention of posterior arch
bite provided with the models. The bite should reflect both the
development.
desired inter-occlusal thickness and the horizontal relationship
of the upper and lower jaws. Models mounted in an adjustable
articulator may offer the best combination of arch positioning
and working and balancing movements. AOA is equipped with
Panadent, SAM and Denar systems as well as our exclusive
hinge axis system.
Pendulum
Pendulums provide consistent and dependable upper molar
distalization without patient cooperation concerns.
T-Rex
Braces
R
Cool!
Simpli5 consultation models with binder Custom logos can be applied
are available displaying before and after to top of models.
treatment models.
Section
Thirteen
Instruments
page 3 Cutters page 17 Tweed Pliers
AEZ AEZ
ETM page 18 Turret
page 6 Utility Pliers AEZ
AEZ page 18 Hand Instruments
ETM AEZ
page 8 Wire Forming Pliers page 19 Bracket Height Gauges
AEZ AEZ
ETM
page 20 Forceps & Hemostats
page 11 Debonding & Adhesive Removing Pliers AEZ
AEZ ETM
ETM
Appliance-Specific page 22 Bracket Holders
AEZ
page 14 Opening & Closing Instruments ETM
Appliance-Specific
page 23 Gauges
page 15 Crown & Band Removers AEZ
AEZ ETM
page 16 Separating & Ligature Pliers page 23 Miscellaneous
AEZ
ETM page 26 Sterilization
SECTION 13 PAGE 2 INSTRUMENTS
AEZ
AEZ Orthodontic Instruments was founded in 1973 by Al and Adry Ezcurra and
joined the Ormco family in 1990. From the beginning, AEZ instruments have been
recognized for their superior design and unparalleled craftsmanship. All AEZ cutters
and pliers feature a one-piece design that enhances their ability to withstand the rig-
ors of daily sterilization procedures and eliminates the risk of galvanic reaction and
the resultant corrosive effects. AEZ cutters also include tips that have been specially
heat treated to a Rockwell hardness of 63, and inserted cutters contain a cobalt steel
tip for increased hardness and durability.
ETM
ETM was founded in 1956 and joined Ormco in 1994. Since its inception, ETM has
been the leader in providing orthodontists with the highest quality, most durable
instruments in the industry. What continues to set ETM instruments apart are their
design and construction features, including the use of highly corrosion-resistant, sur-
gical-grade stainless steel and strong factory-adjustable joints. ETM cutters are hard
chrome plated and contain diamond-honed tool steel inserts, for a lifetime of use.
Most ETM pliers are also manufactured from technologically advanced XQ25 stain-
less steel forgings for added strength.
INSTRUMENTS SECTION 13 PAGE 3
Cutters
AEZ
Slim Ligature Cutter Ezcurra Pin & Ligature
Slim tip design to provide easier intraoral accessibility.
Maximum cutting capacity is .015 soft ligature wire.
Cutter Long Handle
These solid chrominum molybdenum stainless steel
803-0101
cutters are constructed for better stability and resistance.
It is devised for cutting soft wire pints and ligature wires
up to 0.12” (.30mm), it’s slim profile provides easy access
to confined areas.
Long Handle Micro Mini Pin & Lig Cutter
803-0512
Cutters (cont.)
ETM
Distal End Cutter Long Handle Universal
A An exceptional universal cutter designed to cut distal
ends very close to the end of the buccal tube for all types
Cutter w/Hold
of wires. Maximum cutting capacity: archwires up to The flush cut feature of this instrument allows the archwire
.021 x 0.25 (.53mm x .64mm). to be cut with flush with a buccal tube surface. When used
intraorally it safely holds the cut portion to be discarded.
800-1010
Patient comfort is enhanced by the smooth, tapered tip. Can
easily cut all types of wires ranging from .012” (.30 mm) to
.021” x .025” (.53 mm x .64 mm).
800-0516
Utility Pliers
AEZ
How Pliers, Straight Lingual Arch Forming Pliers
Extremely well balanced and lip-safe with serrated tips This heavy-duty plier features precision-ground grooves to
3.2 mm (1/8”) in diameter, this plier is useful for placement securely grip .030” (.76 mm) and .036” (.91 mm) lingual
and removal of archwires, pins and other auxiliaries. arch wires, up to .036” (.91 mm). Perfect for forming back
803-0408 bends and easy for consistent insertion into lingual sheaths.
803-0327
Optical Pliers the tip to have clearance angles on the sides alling for a wide
spring-back. The adaptable loop forming pliers for round
This is the ideal forming plier for forming helical closing wires up to .030” (.76 mm) in diameter.
loops and arch adjustments on wires up to .022” x .025” 803-0414
(.53 mm x .64 mm). The concave beak provides precise
configuration to keep the wire in place.
803-0204
INSTRUMENTS SECTION 13 PAGE 9
Appliance-Specific
Damon Q Debonding/ Damon Clear Debonding
Repositioning Instrument Instrument
Constructed of stainless steel and specifically
866-4008 calibrated for Damon Clear brackets. The
handle is ergonomically designed to ensure
a steady and comfortable grip. For use only
with Damon Clear brackets.
866-4019
INSTRUMENTS SECTION 13 PAGE 13
Appliance-Specific
Debonding & Adhesive Removing Pliers (cont.)
Tweed Pliers
AEZ
Tweed Loop Forming Pliers
Loop forming pliers that create bull and helical loops on Tweed Handle Standard Handle
wires up to .022” x .025” (.53 mm x .64 mm). These pliers
have a precision cylindrical beak and one concave beak as “Tweed” pliers are all wide-handled and made
well as a .045”, .060”, and .075” (1.14 mm, 1.52 mm, and at the request of and used by members of the
1.91 mm) diameter. Charles H. Tweed Foundation.
803-0121
Turret
AEZ
Arch-FormingTurret (Standard)
Forms flat arches .016 through .021, edgewise only.
Five slots, 0° torque.
803-0169
Hand Instruments
AEZ
Double-End Ligature Ligature Director/ Orthodontic Band
Director Scaler Pusher/Scaler
803-0152 803-0159 803-0160
INSTRUMENTS SECTION 13 PAGE 19
Bracket Holders
AEZ / ETM
Bracket Placement Tool Direct Bond Bracket Holder
This tweezer-type tool is designed to provide easy and accurate A stainless steel locking bracket holder with serrated tips.
placement of a direct bond bracket. Constructed from Securely holds direct bond brackets, providing easier instru-
high-quality stainless steel that may be sterilized by conven- ment exchange during bonding procedures.
tional methods. 803-0175
820-2010
Gauges
AEZ / ETM
Anderson Gauge (For band and bracket uses) Bracket Placement
For positioning bracket on a band or checking bonded
bracket height. Precision carbide scribe point. Four positive
Marker/Measuring Gauge
ratchet settings: 3.5 mm, 4 mm, 4.5 mm, 5 mm. Designed to aid direct or indirect Diamond® bracket placement.
Archwire slot and incisal edge of the bracket pad can be
850-0000
Replacement Tip Kit marked. Pencil lead refills are included.
(5 tips/1 wrench) 801-0000
850-0001
Miscellaneous
Elastic Cotton Ligature Cement
Positioner Tweezers Director Scaler
for Power Thin tapered stainless
steel tips. Can be used
Red soft-touch handle.
Can be heat sterilized.
Well-balanced and
designed for quick cement
Modules to apply etching 800-2104 removal. Can be used
The elastic positioner solution with a for direct bond bracket
elongates the power cotton pellet or to positioning.
module to ease position a direct 848-0001
ligation of the bracket. bond bracket.
849-0000
801-0039
Miscellaneous (cont.)
Aspel Force Lingual Hinge Band Seater Band Burnisher
Module Cap Opening Uses new tip design to
fit band contour. Four con-
Permanent, durable
serrated tip of stainless
Instrument Tool tact points for multicontact steel. Well-balanced
oval handle.
Useful instrument for Designed to be used seating. Nylon handle pro-
vides bite surface. 844-0031
placing and removing with hinge cap molar
elastic ligatures and for 844-0000
attachments.
tucking metal ligatures. 802-1001
Yellow soft-touch
handle.Can be heat
sterilized.
800-2108
Miscellaneous (cont.)
Replacement Pads Cap Removal Interproximal Damon 3
The male-type pad with
stem for old style ETM
Tool Kit with Strip Kit Instrument Dual
instruments. Replacement Tip Includes 30 blades – single-
sided and double-sided in
Tip
4.8 mm 803-0187 For convenient conversion 866-4013
fine, medium and coarse (5
6.3 mm 803-0250 of convertible buccal tubes. of each); 4 heat-sterilizeable
The tip should be replaced handles; 15 finishing strips
when it becomes worn or in fine, medium and coarse
deformed from use. Tip
replacement can be done in
(5 of each).
800-8102 (8102)
Advansync 2
a few seconds. Kit contains
one handle and one package
Single-Sided Blades (10)
Fine 800-8103
Crimping Plier
of 5 tips. 800-0425
Medium 800-8104
801-0094 Coarse 800-8105
Replacement Double-Sided Blades (10)
Fine 800-8106
Handle
Medium 800-8107
801-0095
Coarse 800-8108
Replacement Tips
Assorted Blades (9)
(5) (3 fine, 3 medium, 3 coarse)
801-0097 Single-Sided 800-8109
Double-Sided 800-8110
Finishing Strips 8 mm (100)
Fine 800-8111
Medium 800-8112
Coarse 800-8113
Repair & Care
The Ormco Service Center will provide maintenance services
such as sharpening of cutters, repairing joints, and recondi-
tioning products. Adherence to recommended clearing, ster-
ilization and lubrication practices will help ensure optimum
product performance. Cutting instruments that are used fre-
quently should be reconditioned every six to nine months.
Joints should be lubricated with a medical grade lubricant as
needed or after any heat sterilization cycle.
Warranty
Ormco warrants and represents that the Products shall be
free from defects in materials and workmanship for a peri-
od of two (2) years from the date of manufacture, and shall
be manufactured in accordance with Good Manufacturing
Practices. For any Products defective upon initial delivery,
Ormco will replace or provide prompt credit for the full
amount paid. Cutting instruments not performing properly
on intended wire sizes will be sharpened, free of charge, for
the first 90 days after delivery. Ormco is not responsible for
the repair or replacement of any product that has been tam-
pered with, modified, retipped or refitted in any manner, or
is beyond its ordinary expected life. Misuse, abuse or failure
to maintain or care for the instrument properly will void
warranty claims.
Section
Fourteen
Practice Development
Doctor Education
page 2 Books & DVD
Patient Education/Marketing
page 4 Self-Ligation Systems
page 5 Digital Orthodontics
page 6 Aesthetic Appliances
page 7 Metal Twin Appliances
page 7 Intraoral Appliances
SECTION 14 PAGE 2 PRACTICE DEVELOPMENT
Patient Education/Marketing
Self-Ligation Systems
Damon System - Passive Self-Ligation
Consultation Typodonts & Models
Damon Q Consultation Typodont 717-0114
Patient Education/Marketing
Self-Ligation Systems (cont.)
Prodigy SL - Active/Passive Self-Ligation
Consultation Typodonts
Prodigy SL Typodont 717-0090
Artwork
Contact your Ormco representative for access to an online library of
Prodigy SL artwork. The Prodigy SL brand name and artwork is only
authorized for use by doctors/practices offering Prodigy SL.
Prodigy SL Typodont
Digital Orthodontics
Insignia Advanced Smile Design
Consultation Typodont
Insignia Typodont 717-0010
Patient Education/Marketing
Aesthetic Appliances
Also refer to the "Self-Ligation Systems" section
for Damon Clear.
Inspire ICE
Consultation Typodont
Inspire ICE Typodont 717-1026
STb Lingual
Consultation Typodont
STb Lingual Typodont 717-1040
Lingual Gen 7
Typodont
Lingual Gen 7 Typodont 709-0051
STb Social 6 POP Display with Patient Brochures
PRACTICE DEVELOPMENT SECTION 14 PAGE 7
Patient Education/Marketing
Metal Twin Appliances
Consultation Typodonts
Titanium Orthos Typodont 709-0070
Twin Appliances POP Display (brochure holder) – Spanish 070-5526 Twin Appliances POP Display with Patient Brochures
Artwork
Contact your Ormco representative for access to an online library of
Ormco twin artwork, authorized for use by doctors/practices offering
Ormco twin appliances.
Intraoral Appliances
VectorTAS Temporary Anchorage
Typodont and Demonstration DVD
VectorTAS Typodont 717-1054
Other
Plain Typodont 709-0009
ALL SALES ARE SUBJECT TO THE ORMCO (“SELLER”) TERMS AND CONDITIONS OF SALE, WHICH ARE
ATTACHED TO ALL ISSUED INVOICES FOR PRODUCTS AND INCLUDE, BUT ARE NOT LIMITED TO, THE
FOLLOWING TERMS AND CONDITIONS. ALL PRODUCTS, PRICING, TERMS AND CONDITIONS OF THE
SELLER ARE SUBJECT TO CHANGE WITHOUT NOTICE. ANY UPDATED TERMS AND CONDITIONS WILL
BE INCLUDED IN THE INVOICE ISSUED BY THE SELLER COVERING YOUR PURCHASE.
Purchaser assumes all risk and liability resulting from the use of the Seller’s • Products must be unused, in the original unopened package and in
products, whether used separately or in combination with other products not of resalable condition.
Seller’s manufacture. The liability of the Seller for any claim shall not exceed the • Products must be packaged so as to arrive at Seller’s facility undamaged.
purchase price of the products which are the basis of such claim. In no event will • Products must be shipped prepaid and insured for full invoice value.
the Seller be liable for any incidental or consequential damages arising out of use • Products must be of current design.
or performance of Seller’s products. • A copy of original invoice must accompany the products along with a
note explaining the reason for this return.
SHIPMENTS; TITLE TO GOODS • For all International returns, approval must be obtained from Customer
DOMESTIC. All domestic shipments will be made EXW - Ex Works (INCOTERMS Care prior to returning product to the United States. In addition to
2010) Seller’s facility. Delivery will be deemed complete and legal title and all risk providing a copy of the invoice, the customer must provide the Import-
of loss or damage to the Products will pass to Buyer, upon delivery to the carrier. Export Department with the following information in English:
INTERNATIONAL. All international shipments will be made FCA - Free Carrier a. Date of return shipment, customer name and address; Seller’s
(INCOTERMS 2010). Delivery will be deemed complete and legal title and all ship to address; plus the following for each product: product
risk of loss or damage to the Products will pass to Buyer when the Products are name, part number, quantity, value, country of origin, and
delivered to the carrier selected by the Buyer or to a carrier mutually agreed to schedule B number (all found on Seller’s invoice).
by the Seller and the Buyer. b. Statement: “Returned merchandise: value declared for customs
purposes only.”
PAYMENT INFORMATION c. Customers must send a shipment pre-alert to Import-Export
Payment shall be due thirty (30) days after the date of the invoice. Purchases may Department to include the invoice, air bill, flight details and/or
be paid for using individual invoices which will show price of products, delivery arrival information.
charges and sales tax, when applicable. These invoices will be mailed on the first
working day after Products are shipped. A monthly statement covering all • Custom-made products produced on special orders are not returnable.
transactions can also be used which will be sent approximately on the first of • Chemicals or refrigerated products are not returnable.
each month. • Seller’s Customer Returns Department’s evaluation of the condition of
products and count are final.
Any invoice or other outstanding balance not paid within thirty (30) days after the
date of the invoice will be subject to a carrying charge of one and one-half (1 ½%) When returning all or part of an order, enclose a copy of the invoice, and return via
percent per month, an amount equal to eighteen (18%) percent per annum or the a trackable, insurable shipping method to:
maximum rate permitted by law, whichever is less.
Customer Returns:
PATENTED PRODUCTS Credit Returns Dept.
Brackets, molar assemblies and archwires covered by Ormco patents are sold to 305 South Acacia Street, Unit B
user with license for single-use only. San Dimas, CA 91773
ORTHODONTIC PRODUCTS CATALOG
Ormco Corporation
1717 West Collins Avenue
Orange, CA 92867