Professional Documents
Culture Documents
20 Ton Shop Press With Oil Filter Crusher: Set Up and Operating Instructions
20 Ton Shop Press With Oil Filter Crusher: Set Up and Operating Instructions
b. Make sure to read and understand all i. Stay alert. Watch what you are doing
instructions and safety precautions as and use common sense when operat-
outlined in the manufacturer’s service ing the Shop Press. Do not use the
manual for the workpiece you are Press while tired or under the influ-
pressing. Always use the manufac- ence of drugs, alcohol, or medication.
turer’s recommended pressing points, A moment of inattention while oper-
minimum/maximum pressing force ating the Press increases the risk of
required, etc., for the workpiece you injury to persons.
are pressing.
j. Dress properly. Do not wear loose
c. Prior to using the Shop Press, make clothing or jewelry. Contain long hair.
sure tool trays, stands, and all other Keep hair, clothing, and gloves away
tools and equipment are removed from moving parts. Loose clothes,
from the Working Bed. jewelry, or long hair increases the risk
of injury to persons as a result of be-
d. Always keep your hands and fingers ing caught in moving parts.
safety away from the Press Head
and Filter Crushing Head during the k. Avoid unintentional starting. Be sure
pressing process. the Lever on the Valve Body of the
Air/Hydraulic Jack is off before con-
e. Never attempt to remove a workpiece necting to the air supply.
stuck in the moving parts of the Shop
Press while it is connected to its air l. Remove adjusting keys and wrench-
supply source. es before connecting to the air sup-
ply. A wrench or a key that is left
f. Once contact between the Press attached to a moving part of the Shop
Head or Filter Crushing Head and the Press increases the risk of personal
workpiece has been made, step away injury.
as far as possible and continue to
slowly apply pressure until the proce- m. Do not overreach. Keep proper foot-
dure is completed. ing and balance at all times. Proper
footing and balance enables better
PARTS LIST
Part # Description Qty. Part # Description Qty.
1 Nut 16 14 Crushing Housing 1
2 Spring Washer 16 15 Working Bed 1
3 Flat Washer 16 16 Leg 2
4 Bolt 16 17 Bolt 4
5 Spring 2 18 Flat Washer 4
6 Screw Hook 2 19 Spring Washer 4
7 Frame 1 20 Nut 4
8 Flat Washer 2 21 Air/Hydraulic Jack 1
9 Press Head 1 22 Top Cross Beam 1
10 Nut 2 23 Clamp 1
11 Connecting Rod 1 24 Drain Hose 1
12 Upright 2 25 Set Screw 3
13 Filter Crushing Head 1 26 Press Plate 2