Professional Documents
Culture Documents
Technical Data
_______________________________________________________________________________
Chemical Base Polyurethane base Resin
_______________________________________________________________________________
Density at 25°C 1.16 Kg/Lit.
_______________________________________________________________________________
Flash Point 180°C
_______________________________________________________________________________
Colour Yellowish Brown
_______________________________________________________________________________
Chemrite Injection - XP
_______________________________________________________________________________
Application Temperature 5°C to 45°C
_______________________________________________________________________________
Application Details
_______________________________________________________________________________
Substrate Preparation Surfaces of cavities and cracks need to be clean, free of loose
particles, dust, oil and any other bond-breaking substances. Any
dirt must be blown out by compressed air.
_______________________________________________________________________________
Mixing Stir contents of the pail slowly and thoroughly for at least two
minutes and then pour the material into the pump feed containers
and use.
_______________________________________________________________________________
Wet Condition For injection purpose, flush holes with water to thoroughly wet
the injection area.
Reaction times with 10% water and 10% mixed product
Initial Temperature °C 5 10 15 20
Start of reaction (sec) 120 60 25 10
End of reaction (sec) 300 200 110 50
Foam factor 25 25 25 30
Notes All technical data stated in this Product Data Sheet are
based on laboratory tests. Actual measured data may
vary due to circumstances beyond our control.
_______________________________________________________________________________
Toxicity Non – Toxic, Non- Hazardous.
_______________________________________________________________________________