Professional Documents
Culture Documents
1: Noise
Noise is generated due to stray electric fields and mechanical vibrations which trigger the
receiver well before time. In order to avoid the false reading all the detectors are disabled for
120 microseconds after the pulse.
2: t Stretch
In heavily attenuating formations the value of t can be slightly too large due to the
thresholding method employed by the detection circuitry. However, this problem is rarely
significant, and is impossible to detect from the log t
3: Cycle Skipping
It is the failure in the detection of first cycle due to thresholding of the detectors. This causes a
marked and sudden shift to higher t values, followed by a shift back again to the correct value.
4: Mud Arrival
The first wave that will arrive at the detector is mostly from the mud. This is due to shorter
spacing between detector and receiver. In order to avoid this problem the spacing is increased
to an optimum level.