You are on page 1of 6

IC protector

Overcurrent Protection Elements

Circuit protection elements


zCircuit protection elements
Rohm’s circuit protectors have a very reliable current cut-off capability that protects ICs and their circuits from accidental
short circuit loads. Whether operated in AC or DC circuits, these circuit protectors have a very low internal resistance in
normal operation, but safely and rapidly break the circuit when the current cutoff level is exceeded.

zFeatures
1) Cutoff is sharp and repeatable.
2) Low internal resistance and minimal voltage drop.
3) Incombustible.
4) Compact.
5) Rated for continuous use.
6) Good temperature characteristics.
7) Withstands surges well.
8) UL certified (UL certification number E107856).

zApplication
Current surge protection

zOperation notes
Do not use this product on the primary side of commercial power supplies. Arcs that result after cutoff may damage the
molding.

Surface mounting Type


zICP-S series
Product Rated Cutoff Internal resistance Rated Operating Storage
name current (A) characteristics Typ.(Ω) voltage (V) temperature (°C) temperature (°C)

ICP-S0.5 0.5 Fig.1 0.150


ICP-S0.7 0.7 Fig.2 0.084
50 −55 to +125 −55 to +125
ICP-S1.0 1.0 Fig.3 0.061
ICP-S1.2 1.2 Fig.4 0.048

Rev.A 1/5
IC protector
Overcurrent Protection Elements

zCutoff characteristics
10 10 10

1 1 1
CUTOFF TIME : (S)

CUTOFF TIME : (S)

CUTOFF TIME : (S)


0.1 Typ. 0.1 Typ. 0.1 Typ.

0.01 0.01 0.01

0.001 0.001 0.001


0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 2 4 6 8 10 12 14 16 18

CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) CUTOFF CURRENT : (A)

Fig.1 ICP-S0.5 Fig.2 ICP-S0.7 Fig.3 ICP-S1.0

10

1
CUTOFF TIME : (S)

0.1 Typ.

0.01

0.001
0 2 4 6 8 10 12 14 16 18

CUTOFF CURRENT : (A)

Fig.4 ICP-S1.2

The cutoff characteristics shown are typical. For further details of how to use these protectors, please request the
technical documentation from your Rohm representative.

zExternal dimensions (Unit : mm)

ICP-S0.5/S0.7/S1.0/S1.2

3.0±0.1

3.2±0.2 2.5±0.1
2.0±0.1
1.55±0.1
0 to 0.1

0.6 1.0
1.8±0.1

Rev.A 2/5
IC protector
Overcurrent Protection Elements

zPackaging specifications

Package type Taping

ICP-S Symbol TN

Basic ordering
2000
Type unit (pieces)

ICP-S0.5
ICP-S0.7
ICP-S1.0
ICP-S1.2

zTaping specifications (Unit : mm)


ICP-S taping (TN)

Reel Taping
9.0±0.3

1.75±0.1
11.4±1.0 4.0±0.1 0.4±0.1
+0.1 4.0±0.1 2.0±0.05
φ1.5 −0
φ13±0.2

3.5±0.05
+1
φ60 −0

−3
φ180 +0

8.0±0.2
3.5±0.2
5.3±0.2
0~0.5

Electrode
Label attachment position direction φ1.15±0.1 2.8±0.2 2.3±0.2

Rev.A 3/5
IC protector
Overcurrent Protection Elements

Leaded type
ICP-N series

Rated Cutoff Internal resistance Rated Operating Storage


Product name
current (A) characteristics Typ.(Ω) voltage (V) temperature (°C) temperature(°C)

ICP-N10 0.4 Fig.1 0.220


ICP-N15 0.6 Fig.2 0.135
ICP-N20 0.8 Fig.3 0.100
ICP-N25 1.0 Fig.4 0.070 50 −55 to +125 −55 to +125
ICP-N38 1.5 Fig.5 0.042
ICP-N50 2.0 Fig.6 0.035
ICP-N70 2.5 Fig.7 0.023

zCutoff characteristics
10 10 10

1 1 1
CUTOFF TIME : (S)

CUTOFF TIME : (S)

CUTOFF TIME : (S)

0.1 Typ. 0.1 Typ. 0.1 Typ.

0.01 0.01 0.01

0.001 0.001 0.001


0 1 2 3 4 5 6 7 8 9 0 2 4 6 8 10 12 14 16 18 0 2 4 6 8 10 12 14 16 18

CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) CUTOFF CURRENT : (A)

Fig.1 ICP-N10 Fig.2 ICP-N15 Fig.3 ICP-N20

10 10 10

1 1 1
CUTOFF TIME : (S)

CUTOFF TIME : (S)

CUTOFF TIME : (S)

0.1 Typ. 0.1 Typ. 0.1 Typ.

0.01 0.01 0.01

0.001 0.001 0.001


0 2 4 6 8 10 12 14 16 18 0 4 8 12 16 20 24 28 32 36 0 4 8 12 16 20 24 28 32 36

CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) CUTOFF CURRENT : (A)

Fig.4 ICP-N25 Fig.5 ICP-N38 Fig.6 ICP-N50

Rev.A 4/5
IC protector
Overcurrent Protection Elements

10

1
CUTOFF TIME : (S)

0.1 Typ.

0.01

0.001
0 4 8 12 16 20 24 28 32 36

CUTOFF CURRENT : (A)

Fig.7 ICP-N70

The cutoff characteristics given represent typical values. Technical documentation regarding ways of using circuit
protectors is available from your Rohm representative.

zExternal dimensions (Unit : mm) zPackaging specifications


Packaging type Taping
ICP-N10/N15/N20/N25/N38/N50/N70
Symbol T104
5.0±0.2 ICP-N
4.0±0.2
6.35±0.5

Basic ordering
unit (pieces) 3000
Type
2.5Min.

ICP-N10/N15/N20/N25/N38/N50/N70
+0.1
19.0 −0.5

0.5 0.5 0.45±0.1

+0.6
5.0 −0.2

zTaping specifications (Unit : mm)

ICP-N taping (T104) ICP-N zigzag fold taping

6.35±0.5 12.7±0.5 0±1.0


0±0.5 5.2Max.
2.5Min.
5.2Max.

3.85±0.5 27
5
0 to 0.5
+0.1
19.0−0.5

4.2Max.
16.0±0.5

0
11.0Max.

33
2.5Min.

6.0±0.5

9.0±0.5
+1.0
18.0−0.5
6.0±0.5

40
0.5±0.1

φ4.0±0.2
0.7±0.2
0.4 +0.2
−0.1

6.35±0.5 +0.6
5.0 −0.2
12.7±0.3

Rev.A 5/5
Appendix

Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.

The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.

About Export Control Order in Japan


Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.

Appendix1-Rev1.1

You might also like