Professional Documents
Culture Documents
En00209 PDF
En00209 PDF
Steel drums
Removable head (open head) drums with a minimum total {
capacity of 210 l
English version of DIN EN 209 EN 209
ICS 55.140 Supersedes
July 1988 edition
Stahlfässer – Deckelfässer mit einem Gesamtvolumen von and DIN 6644-1,
mindestens 210 l February 1987
edition.
National foreword
Diese Kopie wird bei Änderung nicht berücksichtigt!
The responsible German body involved in its preparation was the Normenausschuss Verpackungswesen
(Packaging Standards Committee), Technical Committee Spund- und Deckelbehältnisse.
DIN ISO 228-1 is the standard corresponding to International Standard ISO 228-1 referred to in clause 2 of
the EN.
Amendments
This standard differs from the July 1988 edition as follows:
a) The scope has been changed to cover steel drums with a minimum total capacity of 210 l.
b) Annex A specifying a capacity measurement method for steel drums has been included.
c) The standard has been editorially revised.
Previous editions
DIN EN 209: 1988-07; DIN 6644-1: 1972-02, 1987-02.
EN comprises 8 pages.
© No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN 209 : 2000-02
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, English price group 07 Sales No. 1107
has the exclusive right of sale for German Standards (DIN-Normen).
07.00
EN 209
December 1999
English version
Steel drums
Removable head (open head) drums with a minimum total capacity
of 210 l
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
© 1999. CEN – All rights of exploitation in any form and by any means Ref. No. EN 209 : 1999 E
reserved worldwide for CEN national members.
Page 2
EN 209 : 1999
Contents
Page
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 Terms and definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5 Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Annex A (normative) Capacity measurement method for removable head (open head)
steel drums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Page 3
EN 209 : 1999
Page 4
EN 209 : 1999
Page 5
EN 209 : 1999
Page 6
EN 209 : 1999
Closures optional
Figure 1 – Removable head (open head) drum with a minimum total capacity of 210 l
Page 7
EN 209 : 1999
Water temperature
Correction factor (F)
°C
12 1,000 5
14 1,000 8
16 1,001 1
18 1,001 4
20 1,001 8
22 1,002 2
24 1,002 7
26 1,003 3
28 1,003 8
30 1,004 4
a)
See EN ISO 90-2 : 1999, 4.1.1
Page 8
EN 209 : 1999