Professional Documents
Culture Documents
Pin Configurations
(top view)
Figure 2
Semiconductor Group 3
07Feb95@09:05h Intermediate Version SAE 81C90/91
Semiconductor Group 4
07Feb95@09:05h Intermediate Version SAE 81C90/91
1)
For best results keep the crystal circuitry connections as short as possible and keep the CLKOUT
line away from it.
2)
If the bus lines work according to the ISO specification, additional circuitry is necessary for
interconnection of the input comparator to the bus lines.
The digital mode is enabled by setting bit DI in register BL2. When using the digital mode pin RX1
should be on VSS.
3)
It is recommended to decouple these supply pins close to the device using a 10 pF capacitor in
addition to the standard 100 nF capacitor.
Semiconductor Group 5