Professional Documents
Culture Documents
11 9:46 AM Page 1
New
Pressure Switch/Reed Switch Type
왎 Can be connected
to Modular type
16% lighter 11% smaller F.R.L. units.
Weight: 62 g Overall height: 52 mm Pressure switch
왎
100 V AC/DC specifications
52 mm
왎 Set pressure range Lubricator
15 m mm
m 23
RoHS Pressure switch Pressure switch
with spacer with piping adapter
Hysteresis
Reed switch
+
SI unit type is provided
Nil 0.5 m
for use in Japan.)
q
e b
Lead wire
length
L 3m
Z 5m
+
Series IS10 c
Scale plate Nil MPa
pressure unit P Note2) Both MPa and psi
CAT.ES60-19A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Series IS10
Dimensions/Construction
(13)
(23)
(5000)
(3000)
(500)
t
r
y
e Component Parts
u No. Description Material
1 Body ZDC
w i 0.2 0.1 2 Switch assembly —
0.4 0.3 3 Shield plate Steel sheet
o
44
1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
381-IS10-CT.qxd 11.4.11 9:46 AM Page 2
Pressure Switch
Reed Switch Type Series IS10
(13)
(23)
(5000)
(3000)
(500)
Pressure switch
Semi-standard: Select one option each in a through c.
Place them in alphanumerical order. 0.2
0.1
0.3
0.4
Example) IS10M-6LP
MPa
B
Symbol Description Body size
20 30 40 50 60
Set pressure Nil 0.1 to 0.4 MPa
a
range 6 Note 1) 0.1 to 0.6 MPa
Semi-standard
+
Nil 0.5 m Lubricator
Lead wire
b L 3m A D Air filter Regulator
length
Z 5m
+
Scale plate
c
Nil MPa Model A B C D Applicable model
pressure unit P Note 2) Both MPa and psi IS10M-20 11 74 64 28 AC20첸
Note 1) Set pressure range of 6P(L, Z) is 0.2 to 0.6 MPa (30 to 90 psi). IS10M-30 13 85 71 30 AC25첸, AC30첸
Note 2) This product is for overseas use only according to the new
IS10M-40 15 93 75 36 AC40첸
Measurement Law. (The SI unit type is provided for use in Japan.)
IS10M-50 17 97 77 44 AC40첸-06
IS10M-60 22 91 67 53 AC50첸, AC55첸, AC60첸
Note) Prepare a spacer separately for modular connection.
(23)
(5000)
(3000)
(500)
MPa
C
20 30 40 Left Right
Nil Rc
Thread type N NPT
F G
+
01 1/8 A D Port size
02 1/4
Port size 03 3/8 Filter regulator
04 1/2
06 3/4 Model Note 1) Port size A B C D E Applicable model
+ IS10E-20쏔01 1/8 AC20첸
Set pressure Nil 0.1 to 0.4 MPa IS10E-20쏔02 1/4 30 66 55 28 16 AR20첸, AW20첸
a
range 6 Note 1) 0.1 to 0.6 MPa AWM20, AWD20
+
IS10E-20쏔03 3/8
Nil 0.5 m IS10E-30쏔02 1/4 AC25첸, AC30첸
Semi-standard
Warning Caution
1. The compatibility of the product is the responsibility of the 1. The product is provided for use in manufacturing industries.
person who designs the equipment or decides its The product herein described is basically provided for peaceful use in
specifications. manufacturing industries.
Since the product specified here is used under various operating If considering using the product in other industries, consult SMC
conditions, its compatibility with specific equipment must be decided by beforehand and exchange specifications or a contract if necessary.
the person who designs the equipment or decides its specifications
If anything is unclear, contact your nearest sales branch.
based on necessary analysis and test results. The expected performance
and safety assurance of the equipment will be the responsibility of the
person who has determined its compatibility with the product. This person
should also continuously review all specifications of the product referring
Limited warranty and Disclaimer/
to its latest catalog information, with a view to giving due consideration to
any possibility of equipment failure when configuring the equipment.
Compliance Requirements
The product used is subject to the following “Limited warranty and
2. Only personnel with appropriate training should operate
machinery and equipment. Disclaimer” and “Compliance Requirements”.
The product specified here may become unsafe if handled incorrectly. Read and accept them before using the product.
The assembly, operation and maintenance of machines or equipment
including our products must be performed by an operator who is Limited warranty and Disclaimer
appropriately trained and experienced.
1. The warranty period of the product is 1 year in service or 1.5
3. Do not service or attempt to remove product and
years after the product is delivered.∗2)
machinery/equipment until safety is confirmed.
Also, the product may have specified durability, running distance or
1. The inspection and maintenance of machinery/equipment should only
be performed after measures to prevent falling or runaway of the replacement parts. Please consult your nearest sales branch.
driven objects have been confirmed. 2. For any failure or damage reported within the warranty period which is
2. When the product is to be removed, confirm that the safety measures clearly our responsibility, a replacement product or necessary parts will
as mentioned above are implemented and the power from any
be provided.
appropriate source is cut, and read and understand the specific
product precautions of all relevant products carefully. This limited warranty applies only to our product independently, and not
3. Before machinery/equipment is restarted, take measures to prevent to any other damage incurred due to the failure of the product.
unexpected operation and malfunction. 3. Prior to using SMC products, please read and understand the warranty
4. Contact SMC beforehand and take special consideration of terms and disclaimers noted in the specified catalog for the particular
safety measures if the product is to be used in any of the products.
following conditions.
∗2) Vacuum pads are excluded from this 1 year warranty.
1. Conditions and environments outside of the given specifications, or use A vacuum pad is a consumable part, so it is warranted for a year after it is
outdoors or in a place exposed to direct sunlight. delivered.
2. Installation on equipment in conjunction with atomic energy, railways, Also, even within the warranty period, the wear of a product due to the use of
air navigation, space, shipping, vehicles, military, medical treatment, the vacuum pad or failure due to the deterioration of rubber material are not
combustion and recreation, or equipment in contact with food and covered by the limited warranty.
beverages, emergency stop circuits, clutch and brake circuits in press
applications, safety equipment or other applications unsuitable for the Compliance Requirements
standard specifications described in the product catalog.
3. An application which could have negative effects on people, property, 1. The use of SMC products with production equipment for the manufac-
or animals requiring special safety analysis. ture of weapons of mass destruction (WMD) or any other weapon is
4. Use in an interlock circuit, which requires the provision of double strictly prohibited.
interlock for possible failure by using a mechanical protective function,
and periodical checks to confirm proper operation. 2. The exports of SMC products or technology from one country to
another are governed by the relevant security laws and regulations of
the countries involved in the transaction. Prior to the shipment of a
SMC product to another country, assure that all local rules governing
that export are known and followed.
Safety Instructions Be sure to read “Handling Precautions for SMC Products” (M-E03-3) and operation manual before using.