The document provides calculations for the required thickness, maximum allowable working pressure (MAWP), and actual stress of elements in a pressure vessel. The MAWP is 794.1 psig limited by the shell course thickness. Internal pressure calculations were performed according to ASME Code Section VIII Division 1 (2017) for an elliptical head made of SA-516 Grade 70 steel at 500°F, with a required thickness of 0.625 inches and MAWP of 789.9 psig after accounting for corrosion and operating pressure.
The document provides calculations for the required thickness, maximum allowable working pressure (MAWP), and actual stress of elements in a pressure vessel. The MAWP is 794.1 psig limited by the shell course thickness. Internal pressure calculations were performed according to ASME Code Section VIII Division 1 (2017) for an elliptical head made of SA-516 Grade 70 steel at 500°F, with a required thickness of 0.625 inches and MAWP of 789.9 psig after accounting for corrosion and operating pressure.
The document provides calculations for the required thickness, maximum allowable working pressure (MAWP), and actual stress of elements in a pressure vessel. The MAWP is 794.1 psig limited by the shell course thickness. Internal pressure calculations were performed according to ASME Code Section VIII Division 1 (2017) for an elliptical head made of SA-516 Grade 70 steel at 500°F, with a required thickness of 0.625 inches and MAWP of 789.9 psig after accounting for corrosion and operating pressure.