Professional Documents
Culture Documents
PGM Programming
PROGRAMMABLE OUTPUT OPTIONS
01 Fire and Burglary Output 14 Ground Start Pulse
02 Not Used 15 Remote Operation
03 Sensor Reset (*72) 16 LINKS 1000 Support (PGM 1 only)
04 2-Wire Smoke Support (PGM2 ONLY) 17 Away Armed Status
05 Armed Status 18 Stay Armed Status
06 Ready To Arm 19 Command Output #1 (*71)
07 Keypad Buzzer Follow Mode 20 Command Output #2 (*72)
08 Courtesy Pulse 21 Command Output #3 (*73)
09 System Trouble Output (with Trouble options) 22 Command Output #4 (*74)
10 System Event (with Event options) 23 24hr Silent input
11 System Tamper (all sources ...Zones, Keypad, Modules) 24 24hr Audible input
12 TLM and Alarm 25 Delayed Fire and Burglary Output
13 Kiss-off Output
Note: The first two entries in Section [010] also control the programming of the last two
Outputs on the PC5020 Main Board!
Note: If Keypad Lockout is active, the panel CANNOT be disarmed with a keyswitch.
Note: Option 3 must be OFF if LCD5500 keypads older than Version 2.00 are used.
Notes: Option 8 is supplemental to Bell Squawk on Arming/Disarming (Section [014] Option 1).
Option 2 applies to all Partitions!
AUTO-ARM SCHEDULE
Enter a four digit entry (HH:MM) for each day that Auto-Arm is to occur.
All entries are 99:99 (disabled) by default. Valid entries are 00:00-23:99.
13
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[188] PARTITION EIGHT AUTO-ARM TIMES
Default
Sunday 9999 I___II___II___II___I Valid entries are 0000-2359 hrs; 9999 to disable.
Monday 9999 I___II___II___II___I
Tuesday 9999 I___II___II___II___I
Wednesday 9999 I___II___II___II___I
Thursday 9999 I___II___II___II___I
Friday 9999 I___II___II___II___I
Saturday 9999 I___II___II___II___I
14
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
PARTITION ZONE ASSIGNMENT PROGRAMMING
[201] PARTITION SELECTION MASK
Default Option ON Option OFF
ON I___I Option 1 Partition 1 is Enabled Partition 1 is Disabled
OFF I___I Option 2 Partition 2 is Enabled Partition 2 is Disabled
OFF I___I Option 3 Partition 3 is Enabled Partition 3 is Disabled
OFF I___I Option 4 Partition 4 is Enabled Partition 4 is Disabled
OFF I___I Option 5 Partition 5 is Enabled Partition 5 is Disabled
OFF I___I Option 6 Partition 6 is Enabled Partition 6 is Disabled
OFF I___I Option 7 Partition 7 is Enabled Partition 7 is Disabled
OFF I___I Option 8 Partition 8 is Enabled Partition 8 is Disabled
15
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[205] PARTITION 1 ZONE ASSIGNMENTS (25-32)
Default Option ON Option OFF
OFF I___I Option 1 Zone 25 is assigned to Partition 1 Zone 25 is not assigned to Partition 1
OFF I___I Option 2 Zone 26 is assigned to Partition 1 Zone 26 is not assigned to Partition 1
OFF I___I Option 3 Zone 27 is assigned to Partition 1 Zone 27 is not assigned to Partition 1
OFF I___I Option 4 Zone 28 is assigned to Partition 1 Zone 28 is not assigned to Partition 1
OFF I___I Option 5 Zone 29 is assigned to Partition 1 Zone 29 is not assigned to Partition 1
OFF I___I Option 6 Zone 30 is assigned to Partition 1 Zone 30 is not assigned to Partition 1
OFF I___I Option 7 Zone 31 is assigned to Partition 1 Zone 31 is not assigned to Partition 1
OFF I___I Option 8 Zone 32 is assigned to Partition 1 Zone 32 is not assigned to Partition 1
16
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
Partition 2 Zone Assignments
[210] PARTITION 2 ZONE ASSIGNMENTS (1-8)
Default Option ON Option OFF
OFF I___I Option 1 Zone 1 is assigned to Partition 2 Zone 1 is not assigned to Partition 2
OFF I___I Option 2 Zone 2 is assigned to Partition 2 Zone 2 is not assigned to Partition 2
OFF I___I Option 3 Zone 3 is assigned to Partition 2 Zone 3 is not assigned to Partition 2
OFF I___I Option 4 Zone 4 is assigned to Partition 2 Zone 4 is not assigned to Partition 2
OFF I___I Option 5 Zone 5 is assigned to Partition 2 Zone 5 is not assigned to Partition 2
OFF I___I Option 6 Zone 6 is assigned to Partition 2 Zone 6 is not assigned to Partition 2
OFF I___I Option 7 Zone 7 is assigned to Partition 2 Zone 7 is not assigned to Partition 2
OFF I___I Option 8 Zone 8 is assigned to Partition 2 Zone 8 is not assigned to Partition 2
17
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[214] PARTITION 2 ZONE ASSIGNMENTS (33-40)
Default Option ON Option OFF
OFF I___I Option 1 Zone 33 is assigned to Partition 2 Zone 33 is not assigned to Partition 2
OFF I___I Option 2 Zone 34 is assigned to Partition 2 Zone 34 is not assigned to Partition 2
OFF I___I Option 3 Zone 35 is assigned to Partition 2 Zone 35 is not assigned to Partition 2
OFF I___I Option 4 Zone 36 is assigned to Partition 2 Zone 36 is not assigned to Partition 2
OFF I___I Option 5 Zone 37 is assigned to Partition 2 Zone 37 is not assigned to Partition 2
OFF I___I Option 6 Zone 38 is assigned to Partition 2 Zone 38 is not assigned to Partition 2
OFF I___I Option 7 Zone 39 is assigned to Partition 2 Zone 39 is not assigned to Partition 2
OFF I___I Option 8 Zone 40 is assigned to Partition 2 Zone 40 is not assigned to Partition 2
18
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
Partition 3 Zone Assignments
[218] PARTITION 3 ZONE ASSIGNMENTS (1-8)
Default Option ON Option OFF
OFF I___I Option 1 Zone 1 is assigned to Partition 3 Zone 1 is not assigned to Partition 3
OFF I___I Option 2 Zone 2 is assigned to Partition 3 Zone 2 is not assigned to Partition 3
OFF I___I Option 3 Zone 3 is assigned to Partition 3 Zone 3 is not assigned to Partition 3
OFF I___I Option 4 Zone 4 is assigned to Partition 3 Zone 4 is not assigned to Partition 3
OFF I___I Option 5 Zone 5 is assigned to Partition 3 Zone 5 is not assigned to Partition 3
OFF I___I Option 6 Zone 6 is assigned to Partition 3 Zone 6 is not assigned to Partition 3
OFF I___I Option 7 Zone 7 is assigned to Partition 3 Zone 7 is not assigned to Partition 3
OFF I___I Option 8 Zone 8 is assigned to Partition 3 Zone 8 is not assigned to Partition 3
19
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[222] PARTITION 3 ZONE ASSIGNMENTS (33-40)
Default Option ON Option OFF
OFF I___I Option 1 Zone 33 is assigned to Partition 3 Zone 33 is not assigned to Partition 3
OFF I___I Option 2 Zone 34 is assigned to Partition 3 Zone 34 is not assigned to Partition 3
OFF I___I Option 3 Zone 35 is assigned to Partition 3 Zone 35 is not assigned to Partition 3
OFF I___I Option 4 Zone 36 is assigned to Partition 3 Zone 36 is not assigned to Partition 3
OFF I___I Option 5 Zone 37 is assigned to Partition 3 Zone 37 is not assigned to Partition 3
OFF I___I Option 6 Zone 38 is assigned to Partition 3 Zone 38 is not assigned to Partition 3
OFF I___I Option 7 Zone 39 is assigned to Partition 3 Zone 39 is not assigned to Partition 3
OFF I___I Option 8 Zone 40 is assigned to Partition 3 Zone 40 is not assigned to Partition 3
20
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
Partition 4 Zone Assignments
[226] PARTITION 4 ZONE ASSIGNMENTS (1-8)
Default Option ON Option OFF
OFF I___I Option 1 Zone 1 is assigned to Partition 4 Zone 1 is not assigned to Partition 4
OFF I___I Option 2 Zone 2 is assigned to Partition 4 Zone 2 is not assigned to Partition 4
OFF I___I Option 3 Zone 3 is assigned to Partition 4 Zone 3 is not assigned to Partition 4
OFF I___I Option 4 Zone 4 is assigned to Partition 4 Zone 4 is not assigned to Partition 4
OFF I___I Option 5 Zone 5 is assigned to Partition 4 Zone 5 is not assigned to Partition 4
OFF I___I Option 6 Zone 6 is assigned to Partition 4 Zone 6 is not assigned to Partition 4
OFF I___I Option 7 Zone 7 is assigned to Partition 4 Zone 7 is not assigned to Partition 4
OFF I___I Option 8 Zone 8 is assigned to Partition 4 Zone 8 is not assigned to Partition 4
21
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[230] PARTITION 4 ZONE ASSIGNMENTS (33-40)
Default Option ON Option OFF
OFF I___I Option 1 Zone 33 is assigned to Partition 4 Zone 33 is not assigned to Partition 4
OFF I___I Option 2 Zone 34 is assigned to Partition 4 Zone 34 is not assigned to Partition 4
OFF I___I Option 3 Zone 35 is assigned to Partition 4 Zone 35 is not assigned to Partition 4
OFF I___I Option 4 Zone 36 is assigned to Partition 4 Zone 36 is not assigned to Partition 4
OFF I___I Option 5 Zone 37 is assigned to Partition 4 Zone 37 is not assigned to Partition 4
OFF I___I Option 6 Zone 38 is assigned to Partition 4 Zone 38 is not assigned to Partition 4
OFF I___I Option 7 Zone 39 is assigned to Partition 4 Zone 39 is not assigned to Partition 4
OFF I___I Option 8 Zone 40 is assigned to Partition 4 Zone 40 is not assigned to Partition 4
22
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
Partition 5 Zone Assignments
[234] PARTITION 5 ZONE ASSIGNMENTS (1-8)
Default Option ON Option OFF
OFF I___I Option 1 Zone 1 is assigned to Partition 5 Zone 1 is not assigned to Partition 5
OFF I___I Option 2 Zone 2 is assigned to Partition 5 Zone 2 is not assigned to Partition 5
OFF I___I Option 3 Zone 3 is assigned to Partition 5 Zone 3 is not assigned to Partition 5
OFF I___I Option 4 Zone 4 is assigned to Partition 5 Zone 4 is not assigned to Partition 5
OFF I___I Option 5 Zone 5 is assigned to Partition 5 Zone 5 is not assigned to Partition 5
OFF I___I Option 6 Zone 6 is assigned to Partition 5 Zone 6 is not assigned to Partition 5
OFF I___I Option 7 Zone 7 is assigned to Partition 5 Zone 7 is not assigned to Partition 5
OFF I___I Option 8 Zone 8 is assigned to Partition 5 Zone 8 is not assigned to Partition 5
23
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[238] PARTITION 5 ZONE ASSIGNMENTS (33-40)
Default Option ON Option OFF
OFF I___I Option 1 Zone 33 is assigned to Partition 5 Zone 33 is not assigned to Partition 5
OFF I___I Option 2 Zone 34 is assigned to Partition 5 Zone 34 is not assigned to Partition 5
OFF I___I Option 3 Zone 35 is assigned to Partition 5 Zone 35 is not assigned to Partition 5
OFF I___I Option 4 Zone 36 is assigned to Partition 5 Zone 36 is not assigned to Partition 5
OFF I___I Option 5 Zone 37 is assigned to Partition 5 Zone 37 is not assigned to Partition 5
OFF I___I Option 6 Zone 38 is assigned to Partition 5 Zone 38 is not assigned to Partition 5
OFF I___I Option 7 Zone 39 is assigned to Partition 5 Zone 39 is not assigned to Partition 5
OFF I___I Option 8 Zone 40 is assigned to Partition 5 Zone 40 is not assigned to Partition 5
24
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
Partition 6 Zone Assignments
[242] PARTITION 6 ZONE ASSIGNMENTS (1-8)
Default Option ON Option OFF
OFF I___I Option 1 Zone 1 is assigned to Partition 6 Zone 1 is not assigned to Partition 6
OFF I___I Option 2 Zone 2 is assigned to Partition 6 Zone 2 is not assigned to Partition 6
OFF I___I Option 3 Zone 3 is assigned to Partition 6 Zone 3 is not assigned to Partition 6
OFF I___I Option 4 Zone 4 is assigned to Partition 6 Zone 4 is not assigned to Partition 6
OFF I___I Option 5 Zone 5 is assigned to Partition 6 Zone 5 is not assigned to Partition 6
OFF I___I Option 6 Zone 6 is assigned to Partition 6 Zone 6 is not assigned to Partition 6
OFF I___I Option 7 Zone 7 is assigned to Partition 6 Zone 7 is not assigned to Partition 6
OFF I___I Option 8 Zone 8 is assigned to Partition 6 Zone 8 is not assigned to Partition 6
25
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[246] PARTITION 6 ZONE ASSIGNMENTS (33-40)
Default Option ON Option OFF
OFF I___I Option 1 Zone 33 is assigned to Partition 6 Zone 33 is not assigned to Partition 6
OFF I___I Option 2 Zone 34 is assigned to Partition 6 Zone 34 is not assigned to Partition 6
OFF I___I Option 3 Zone 35 is assigned to Partition 6 Zone 35 is not assigned to Partition 6
OFF I___I Option 4 Zone 36 is assigned to Partition 6 Zone 36 is not assigned to Partition 6
OFF I___I Option 5 Zone 37 is assigned to Partition 6 Zone 37 is not assigned to Partition 6
OFF I___I Option 6 Zone 38 is assigned to Partition 6 Zone 38 is not assigned to Partition 6
OFF I___I Option 7 Zone 39 is assigned to Partition 6 Zone 39 is not assigned to Partition 6
OFF I___I Option 8 Zone 40 is assigned to Partition 6 Zone 40 is not assigned to Partition 6
26
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
Partition 7 Zone Assignments
[250] PARTITION 7 ZONE ASSIGNMENTS (1-8)
Default Option ON Option OFF
OFF I___I Option 1 Zone 1 is assigned to Partition 7 Zone 1 is not assigned to Partition 7
OFF I___I Option 2 Zone 2 is assigned to Partition 7 Zone 2 is not assigned to Partition 7
OFF I___I Option 3 Zone 3 is assigned to Partition 7 Zone 3 is not assigned to Partition 7
OFF I___I Option 4 Zone 4 is assigned to Partition 7 Zone 4 is not assigned to Partition 7
OFF I___I Option 5 Zone 5 is assigned to Partition 7 Zone 5 is not assigned to Partition 7
OFF I___I Option 6 Zone 6 is assigned to Partition 7 Zone 6 is not assigned to Partition 7
OFF I___I Option 7 Zone 7 is assigned to Partition 7 Zone 7 is not assigned to Partition 7
OFF I___I Option 8 Zone 8 is assigned to Partition 7 Zone 8 is not assigned to Partition 7
27
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[254] PARTITION 7 ZONE ASSIGNMENTS (33-40)
Default Option ON Option OFF
OFF I___I Option 1 Zone 33 is assigned to Partition 7 Zone 33 is not assigned to Partition 7
OFF I___I Option 2 Zone 34 is assigned to Partition 7 Zone 34 is not assigned to Partition 7
OFF I___I Option 3 Zone 35 is assigned to Partition 7 Zone 35 is not assigned to Partition 7
OFF I___I Option 4 Zone 36 is assigned to Partition 7 Zone 36 is not assigned to Partition 7
OFF I___I Option 5 Zone 37 is assigned to Partition 7 Zone 37 is not assigned to Partition 7
OFF I___I Option 6 Zone 38 is assigned to Partition 7 Zone 38 is not assigned to Partition 7
OFF I___I Option 7 Zone 39 is assigned to Partition 7 Zone 39 is not assigned to Partition 7
OFF I___I Option 8 Zone 40 is assigned to Partition 7 Zone 40 is not assigned to Partition 7
28
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
Partition 8 Zone Assignments
[258] PARTITION 8 ZONE ASSIGNMENTS (1-8)
Default Option ON Option OFF
OFF I___I Option 1 Zone 1 is assigned to Partition 8 Zone 1 is not assigned to Partition 8
OFF I___I Option 2 Zone 2 is assigned to Partition 8 Zone 2 is not assigned to Partition 8
OFF I___I Option 3 Zone 3 is assigned to Partition 8 Zone 3 is not assigned to Partition 8
OFF I___I Option 4 Zone 4 is assigned to Partition 8 Zone 4 is not assigned to Partition 8
OFF I___I Option 5 Zone 5 is assigned to Partition 8 Zone 5 is not assigned to Partition 8
OFF I___I Option 6 Zone 6 is assigned to Partition 8 Zone 6 is not assigned to Partition 8
OFF I___I Option 7 Zone 7 is assigned to Partition 8 Zone 7 is not assigned to Partition 8
OFF I___I Option 8 Zone 8 is assigned to Partition 8 Zone 8 is not assigned to Partition 8
29
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[262] PARTITION 8 ZONE ASSIGNMENTS (33-40)
Default Option ON Option OFF
OFF I___I Option 1 Zone 33 is assigned to Partition 8 Zone 33 is not assigned to Partition 8
OFF I___I Option 2 Zone 34 is assigned to Partition 8 Zone 34 is not assigned to Partition 8
OFF I___I Option 3 Zone 35 is assigned to Partition 8 Zone 35 is not assigned to Partition 8
OFF I___I Option 4 Zone 36 is assigned to Partition 8 Zone 36 is not assigned to Partition 8
OFF I___I Option 5 Zone 37 is assigned to Partition 8 Zone 37 is not assigned to Partition 8
OFF I___I Option 6 Zone 38 is assigned to Partition 8 Zone 38 is not assigned to Partition 8
OFF I___I Option 7 Zone 39 is assigned to Partition 8 Zone 39 is not assigned to Partition 8
OFF I___I Option 8 Zone 40 is assigned to Partition 8 Zone 40 is not assigned to Partition 8
30
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
COMMUNICATIONS PROGRAMMING
* For Sections [301] to [348], the contents of every section by default is [F].
Note: All six digit must be entered in order for any changes to be saved. Any unused digits should be filled with F.
Notes: SIA will use this account code for all eight partitions.
Only SIA supports six digit account codes. If the last two digits of the account code are FF, the panel will
only use the first four digits.
31
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[320] ALARM REPORTING CODES, ZONES 1-16
I___II___I Zone 1 Alarm I___II___I Zone 9 Alarm
I___II___I Zone 2 Alarm I___II___I Zone 10 Alarm
I___II___I Zone 3 Alarm I___II___I Zone 11 Alarm
I___II___I Zone 4 Alarm I___II___I Zone 12 Alarm
I___II___I Zone 5 Alarm I___II___I Zone 13 Alarm
I___II___I Zone 6 Alarm I___II___I Zone 14 Alarm
I___II___I Zone 7 Alarm I___II___I Zone 15 Alarm
I___II___I Zone 8 Alarm I___II___I Zone 16 Alarm
32
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[325] ALARM RESTORE REPORTING CODES, ZONES 17-32
I___II___I Zone 17 Alarm Restore I___II___I Zone 25 Alarm Restore
I___II___I Zone 18 Alarm Restore I___II___I Zone 26 Alarm Restore
I___II___I Zone 19 Alarm Restore I___II___I Zone 27 Alarm Restore
I___II___I Zone 20 Alarm Restore I___II___I Zone 28 Alarm Restore
I___II___I Zone 21 Alarm Restore I___II___I Zone 29 Alarm Restore
I___II___I Zone 22 Alarm Restore I___II___I Zone 30 Alarm Restore
I___II___I Zone 23 Alarm Restore I___II___I Zone 31 Alarm Restore
I___II___I Zone 24 Alarm Restore I___II___I Zone 32 Alarm Restore
33
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[331] TAMPER REPORTING CODES, ZONES 17-32
I___II___I Zone 17 Tamper I___II___I Zone 25 Tamper
I___II___I Zone 18 Tamper I___II___I Zone 26 Tamper
I___II___I Zone 19 Tamper I___II___I Zone 27 Tamper
I___II___I Zone 20 Tamper I___II___I Zone 28 Tamper
I___II___I Zone 21 Tamper I___II___I Zone 29 Tamper
I___II___I Zone 22 Tamper I___II___I Zone 30 Tamper
I___II___I Zone 23 Tamper I___II___I Zone 31 Tamper
I___II___I Zone 24 Tamper I___II___I Zone 32 Tamper
34
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[336] TAMPER RESTORE REPORTING CODES, ZONES 33-48
I___II___I Zone 33 Tamper Restore I___II___I Zone 41 Tamper Restore
I___II___I Zone 34 Tamper Restore I___II___I Zone 42 Tamper Restore
I___II___I Zone 35 Tamper Restore I___II___I Zone 43 Tamper Restore
I___II___I Zone 36 Tamper Restore I___II___I Zone 44 Tamper Restore
I___II___I Zone 37 Tamper Restore I___II___I Zone 45 Tamper Restore
I___II___I Zone 38 Tamper Restore I___II___I Zone 46 Tamper Restore
I___II___I Zone 39 Tamper Restore I___II___I Zone 47 Tamper Restore
I___II___I Zone 40 Tamper Restore I___II___I Zone 48 Tamper Restore
35
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[342] OPENING (DISARMING) REPORTING CODES, ACCESS CODES 1-16
I___II___I Opening by Access Code 1 I___II___I Opening by Access Code 9
I___II___I Opening by Access Code 2 I___II___I Opening by Access Code 10
I___II___I Opening by Access Code 3 I___II___I Opening by Access Code 11
I___II___I Opening by Access Code 4 I___II___I Opening by Access Code 12
I___II___I Opening by Access Code 5 I___II___I Opening by Access Code 13
I___II___I Opening by Access Code 6 I___II___I Opening by Access Code 14
I___II___I Opening by Access Code 7 I___II___I Opening by Access Code 15
I___II___I Opening by Access Code 8 I___II___I Opening by Access Code 16
Note: The LINKS Test Transmission Code must be programmed with 00 for the LINKS Test Tx to be disabled.
36
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[349] PC5700 MAINTENANCE REPORTING CODES
I___II___I PC5700 Ground Fault Trouble I___II___I PC5700 TLM Line 1 Restore
I___II___I PC5700 Ground Fault Restore I___II___I PC5700 TLM Line 2 Trouble
I___II___I PC5700 TLM Line 1 Trouble I___II___I PC5700 TLM Line 2 Restore
Default
03 I___II___I 1st Phone Number
03 I___II___I 2nd Phone Number
37
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[354] PARTITION 4 ALARM/RESTORE COMMUNICATOR CALL DIRECTIONS
Default Option ON Option OFF
ON I___I Option 1 1st Telephone Number Disabled
OFF I___I Option 2 2nd Telephone Number Disabled
OFF I___I Option 3 1st Telephone Number (via LINKS) Disabled
OFF I___I Option 4 2nd Telephone Number (via LINKS) Disabled
ON I___I Option 5 Alternate Communicator Disabled
OFF I___I Option 6 For Future Use
OFF I___I Option 7 For Future Use
OFF I___I Option 8 For Future Use
38
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
OFF I___I Option 8 For Future Use
39
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[359] PARTITION 1 TAMPER ALARM/RESTORE COMMUNICATOR CALL DIRECTIONS
Default Option ON Option OFF
ON I___I Option 1 1st Telephone Number Disabled
OFF I___I Option 2 2nd Telephone Number Disabled
OFF I___I Option 3 1st Telephone Number (via LINKS) Disabled
OFF I___I Option 4 2nd Telephone Number (via LINKS) Disabled
ON I___I Option 5 Alternate Communicator Disabled
OFF I___I Option 6 For Future Use
OFF I___I Option 7 For Future Use
OFF I___I Option 8 For Future Use
40
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
OFF I___I Option 8 For Future Use
42
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[369] PARTITION 3 OPENING/CLOSING COMMUNICATOR CALL DIRECTIONS
Default Option ON Option OFF
ON I___I Option 1 1st Telephone Number Disabled
OFF I___I Option 2 2nd Telephone Number Disabled
OFF I___I Option 3 1st Telephone Number (via LINKS) Disabled
OFF I___I Option 4 2nd Telephone Number (via LINKS) Disabled
ON I___I Option 5 Alternate Communicator Disabled
OFF I___I Option 6 For Future Use
OFF I___I Option 7 For Future Use
OFF I___I Option 8 For Future Use
44
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
[380] FIRST COMMUNICATOR OPTION CODE
Default Option ON Option OFF
ON I___I Option 1 Communications Enabled Communications Disabled
OFF I___I Option 2 Restores on Bell Time-out Restores Follow Zones
OFF I___I Option 3 Pulse Dialing DTMF Dialing
OFF I___I Option 4 Switch to Pulse Dialing on 5th Attempt DTMF Dial For All Attempts
ON I___I Option 5 3rd Phone Number Enabled 3rd Phone Number Disabled
ON I___I Option 6 Alternate Dial (1st & 3rd) Call 1st Number, Backup to 3rd
OFF I___I Option 7 Call LINKS as well as Land Line LINKS is Backup of Land Line(s)
OFF I___I Option 8 Delinquency Follows Zone Activity (Hours) Delinquency Follows Arming (Days)
45
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
DOWNLOADING PROGRAMMING
[401] FIRST DOWNLOADING OPTION CODE
Default Option ON Option OFF
OFF I___I Option 1 Answering Machine / Double Call Enabled Answ. Machine / Double Call Disabled
ON I___I Option 2 User Can Enable DLS Window User Can Not Enable DLS Window
OFF I___I Option 3 Call-Back Enabled Call-Back Disabled
OFF I___I Option 4 User Initiated Call-up Enabled User Initiated Call-up Disabled
OFF I___I Option 5 Auto Event Buffer Upload Enabled Auto Event Buffer Upload Disabled
OFF I___I Option 6 For Future Use
OFF I___I Option 7 For Future Use
OFF I___I Option 8 For Future Use
46
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
PGM OUTPUT PROGRAMMING
PROGRAMMABLE OUTPUT ATTRIBUTES
PGM Title 1 2 3 4 5 6 7 8
Option
01 Burglary and Fire Bell Output Off Off On Off Off Off Off Off
02 For Future Use Off Off Off Off Off Off Off Off
03 Sensor Reset (*72) Off Off On On Off Off Off Off
04 2-Wire Smoke Support (PGM2 ONLY) Off Off On Off Off Off Off Off
05 Armed Status Off Off On Off Off Off Off Off
06 Ready To Arm Off Off On Off Off Off Off Off
07 Keypad Buzzer Follow Mode Off Off On Off Off Off Off Off
08 Courtesy Pulse Off Off On Off Off Off Off Off
09 System Trouble Output (with Trouble options) On On On On On On On On
10 System Event (with Event options) On On On On On On On Off
11 System Tamper (all sources) Off Off On Off Off Off Off Off
12 TLM and Alarm Off Off On Off Off Off Off Off
13 Kissoff Output Off Off On On Off Off Off Off
14 Ground Start Pulse Off Off On On Off Off Off Off
15 Remote Operation (DLS-1 Support) Off Off On Off Off Off Off Off
16 LINKS 1000 Support (PGM 1 only) Off Off On Off Off Off Off Off
17 Away Armed Status Off Off On Off Off Off Off Off
18 Stay Armed Status Off Off On Off Off Off Off Off
19 Command Output #1 (*71) Off Off On On On Off Off Off
20 Command Output #2 (*72) Off Off On On Off Off Off Off
21 Command Output #3 (*73) Off Off On On Off Off Off Off
22 Command Output #4 (*74) Off Off On On Off Off Off Off
23 Silent 24 Hour (PGM2 only) Off Off On Off Off Off Off Off
24 Audible 24 Hour (PGM2 only) Off Off On Off Off Off Off Off
25 Delayed Burglary and Fire Bell Output Off Off On Off Off Off Off Off
- denotes attribute that is not used; a change of default setting will NOT affect the output.
- denotes attribute that is ON by default; a change of setting will affect the output.
- denotes attribute that is OFF by default; a change of setting will affect the output.
Option 1 For Future Use Service Req. Enab Disabled Burglary Events Enab Disabled
Option 2 For Future Use AC Fail Enabled Disabled Fire Events Enab Disabled
Option 3 True Output Inverted TLM Fault Enabled Disabled Panic Events Enab Disabled
Option 4 Output Pulsed On/Off FTC Enabled Disabled Medical Events Enab Disabled
Option 5 Code Required No Code Req Zone Fault Enabled Disabled Supervisory Ev. Enab Disabled
Option 6 For Future Use Zone Tamper Enab. Disabled Priority Events Enab Disabled
Option 7 For Future Use Zone Low Batt Enab Disabled Holdup Events Enab Disabled
47
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
Option 8 For Future Use Loss of Clock Enab. Disabled Output Follows Timer Latched
Note: Only Types 03 and 19-22 use Attributes 4 and 5.
Note: If a System Event PGM is programmed to follow the Command Output Timer, all attributes must be enabled.
48
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
PGM ATTRIBUTES
Attribute 1 2 3 4 5 6 7 8
MAIN BOARD
[501] PGM 1 I____I I____I I____I I____I I____I I____I I____I I____I
[502] PGM 2 I____I I____I I____I I____I I____I I____I I____I I____I
PC5208/MAIN BOARD
[503] PGM 3 I____I I____I I____I I____I I____I I____I I____I I____I
[504] PGM 4 I____I I____I I____I I____I I____I I____I I____I I____I
PC5208
[505] PGM 5 I____I I____I I____I I____I I____I I____I I____I I____I
[506] PGM 6 I____I I____I I____I I____I I____I I____I I____I I____I
[507] PGM 7 I____I I____I I____I I____I I____I I____I I____I I____I
[508] PGM 8 I____I I____I I____I I____I I____I I____I I____I I____I
[509] PGM 9 I____I I____I I____I I____I I____I I____I I____I I____I
[510] PGM 10 I____I I____I I____I I____I I____I I____I I____I I____I
PC5204
[511] PGM 11 I____I I____I I____I I____I I____I I____I I____I I____I
[512] PGM 12 I____I I____I I____I I____I I____I I____I I____I I____I
[513] PGM 13 I____I I____I I____I I____I I____I I____I I____I I____I
[514] PGM 14 I____I I____I I____I I____I I____I I____I I____I I____I
49
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
PARTITION ASSIGNMENT
Section Output Partition Partition Partition Partition Partition Partition Partition Partition
Number Number One Two Three Four Five Six Seven Eight
Enabled/ Enabled/ Enabled/ Enabled/ Enabled/ Enabled/ Enabled/ Enabled/
Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled
Defaults Enabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled
Main Board
[551] PGM 1
[552] PGM 2
Main Board/PC5208
[553] PGM 3
[554] PGM 4
PC5208
[555] PGM 5
[556] PGM 6
[557] PGM 7
[558] PGM 8
[559] PGM 9
[560] PGM 10
PC5204
[561] PGM 11
[562] PGM 12
[563] PGM 13
[564] PGM 14
50
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
INTERNATIONAL PROGRAMMING
[700] AUTOMATIC CLOCK ADJUST
Default
60 I___II___I (Valid entries are 00-99)
52
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
3.0 Document Revision History
Originated
Date: August 29, 2001
By: Brian Storrie, Product Management, Marketing, Digital Security Controls, Ltd.
53
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley
4.0 Document Revision Endnotes
54
Form Number: 7-0049 File Name: PC5020 Programming Revision/Date: 11/ February 3, 2000
worksheets.doc
Department: Engineering Division: Engineering Quality Form Template Owner: Luke Handley