Professional Documents
Culture Documents
Ss = ( Qwp + Įs Qws ) × L / Ap E
Where,
Qwp = Load carried at the pile point under working load condition(kN)
Įs = Distribution factor (=0.67)
Sp = Cp Qwp / b qp
Where,
Cp = Empirical coefficient (=0.025)
Soil type Driven pile Bored pile
Sand (dense to loose) 0.02 ~ 0.04 0.09 ~ 0.18
Clay (stiff to soft) 0.02 ~ 0.03 0.03 ~ 0.06
Silt (dense to loose) 0.03 ~ 0.05 0.09 ~ 0.12
* 'Design of Pile Foundation', by A.S. Vesic
28
KALSELTENG2 CFSPP 2X100MW
IKCP0-YYZ-C-07-0002 DESIGN REPORT FOR PILE BEARING CAPACITY REV.1
4.7.3 Settlement of pile caused by the load transmitted along the pile
shaft(Sps)
Ssp = Cs Qws / Lc qp
Where,
Cs = Empirical constant
= (0.93 + 0.16 ) Cp
Lc = Embedded length of pile(m)
30
5HIHUHQFH
1
1
1
1
1
5HIHUHQFH
1
1