Professional Documents
Culture Documents
E Waste Management Its Effect On Human Health and Environment PDF
E Waste Management Its Effect On Human Health and Environment PDF
‘THE E-WASTE AND ITS EFFECT ON THE HUMAN HEALTH & ENVIRONMENT’
Abstracts:
E-waste is the abbreviation of the waste electrical and electronics equipments. These are
the gadgets that are used by the people in their day to day life. Once their life gets over or
these equipments go out of order, they are immediately replaced with the newer ones. In
other cases these items are even get replaced just to get the latest version of the facility. For
example, the mobile and the television sets are being replaced for this purpose only. Hardly
is it concerned what those items make once these are disposed of. But these e-wastes pose
a great danger as most of these items are consist of harmful elements like lead, cadmium,
bromine and mercury which are capable of causing a lot of damage to the human body if get
exposed for a considerable period of time.
Another problem that these items possess is the same amount of danger to the
environment as well. It is because these waste materials consume a significant portion of
space as keep on lying for a long period of time as these are not at all bio-degradable. And
most of the harmful elements leach into the soil causing both land as well as water
pollution. The problem came into the fore as most of the western countries including U.S.A
started replacing rapidly their electronic gadgets and disposed them in the coasts of the
developing countries of South Asia, India and China in the name of recycling. It is because
these countries have the cheap labour and adequate recycling facility. But the recycling
process not being of the scientific type, it adds only to the degradation of environment. The
perfect example is the area of Guiyu of China.
After all, these e-waste materials are the emerging threat to both the human beings and the
environment which are needed to be taken care at the earliest. This paper deals with some
of the basic concepts like what is e-waste, why and how these wastes are created, what are
generally done to these e-waste materials as well as the methods that should be applied for
the management of these wastes.
Contents:
1. Chapter 1: introduction 1
1.1: What is E-waste..? 1
1.2: Classification of e-waste 1
1.3: Why is the e-waste? 3
1.4: What is generally done with these e-waste materials! 4
7. Conclusion 14
8. References 16
Contents of figure:
Contents of table:
The modern lifestyle and its benefits exist because of industry. Health-giving
pharmaceuticals, labour-saving household appliances, automobiles and ships, paints and
detergents, synthetic fibres and polythene packaging, personal computers and TVs – the list
of useful manufactured goods is almost endless. With the advent of new technology and the
requirement of replacement, we keep on updating our electronic gadgets for a happy
material life. But these useful things become harmful when these are ceased to be
functioning. They add to the volume of waste materials and put detrimental impact to both
our health and environment as most of these items contain harmful elements like lead,
fibre, mercury and bromine etc. These solid wastes are neither composed nor recycled
which creates a huge problem to the environment as well as the human beings. This
electronic waste is now a major cause of concern which is no less significant than the other
problems those cause air, water, land and nuclear pollution.
E-waste encompasses ever growing range of obsolete electronic devices such as computers,
servers, main frames, monitors, TVs & display devices, telecommunication devices such as
cellular phones & pagers, calculators, audio and video devices, printers, scanners, copiers
and fax machines besides refrigerators, air conditioners, washing machines, and microwave
ovens, e-waste also covers recording devices such as DVDs, CDs, floppies, tapes, printing
cartridges, military electronic waste, automobile catalytic converters, electronic
components such as chips, processors, mother boards, printed circuit boards, industrial
electronics such as sensors, alarms, sirens, security devices, automobile electronic devices.
Here’s a startling fact. Electronic waste is the fastest growing segment in our waste stream
and while most of this so-called e waste is recyclable – less than 20% actually is. In many
states, it’s illegal to send this stuff to the landfill. Electronics contain toxic heavy metals and
Page | 1
e-waste is the leading source of these toxins in landfills where it is exposed to our
environment. E-waste is also a source of valuable metals like gold, silver and copper and
makes e-waste recycling a growing industry. Here are some of the sources of e-waste in this
country.
1. Televisions
The government estimates that roughly 27 million televisions are replaced each year but
only 18% are recycled. It’s also believed that millions of unused TVs are stored in closets,
attics and electronic repairing shops all across the country. Considering the large volume of
e-waste, these TVs should be recycled but it’s not always easy. Now some of the companies
have taken initiative to draw the used and out of order TVs from the household users for
recycling. The condition has aggravated further due to the introduction of the new high-end
luxury Plasma screens and LCDs (liquid crystal display) in place of the old CRT (cathode ray
tube) screens.
2. Computers
Roughly 30 million desktop and laptop computers are thrown out each year. It’s a mind
boggling number so think of it this way – Americans discard more than 110,000 computers a
week. Among the e-waste items, the volume of these computers is growing rapidly as it has
been the most fast-hand electronics gadget that is used for multiple works. The monitor,
motherboard, chips, microchips, CRT or LCD screens, keyboards and a lot of spare parts are
adding to the volume of e-waste every day.
3. Cell Phones
Perhaps this has become the common gadget for every person in the world. Due to its
affordability and necessity, its number is growing significantly and every additional cell
phone in place of the older one is adding to the total amount of electronics waste every day.
It has been estimated that every year an approximate amount of 140 million cell phones are
being discarded and in this field the developed countries are quite ahead. The reason is well
known. The arrival of multimedia sets, technologically advanced Blackberry, Java and
Android multipurpose cell phones are being readily replaced by the users.
This is the other e-waste that adds up quickly. Electronic items such as DVD players, mp3
devices, digital cameras, headphones, etc are the worst offenders. They are a large part of
the 400 million pieces of e-waste that are discarded each year. Working items can be given a
second life when donated to a local charity. Non-working items can be recycled for valuable
metal components. These items, being of low cost gadgets, are never repaired or recycled
rather; are replaced forthwith in case they go out of order.
Page | 2
1 Source: report of the Environmental bulletin (January, 2005), by the United Nations Environment Programme.
The above figure shows the proportion of the electronic equipments which make the e-
waste. Among them are the television sets, cell phones, computer and accessories and the
other entertainment and luxurious gadgets such as camera, CDs, DVDs, VCR players, tape
Cassette & cassette players, freezers, coolers, Air conditioners etc. It has been observed that
the TV sets and the cell phones are the most items those are being replaced rapidly as new
inventions are flooding the market and the techno-savvy people are desperate to update
themselves with the latest ones without caring for the old items that simply goes on adding
the existing volume of wastes. Then comes the PCs and its accessories such as chips, cable
wares, conductors and semi-conductors, screens, key-boards, mouse etc.
Now these days this electronic waste has become a serious cause of concern as it poses the
imminent threat to the environment. The most important thing is that it is growing in an
alarming rate. The first question that comes is why it is growing rapidly? It is because of the
rapid change of technology, population explosion, stability of the financial status etc. The
amount of e-waste was not of such a volume as it is there. But it increased rapidly due to
the change of technology. The change started from the replacement of the old CRT model
television sets that were replaced with the LCDs. The eighties witnessed the faster increase
of these e-wastes as most of the electronics items were being replaced with the
comparative newer and better ones in the America and the European countries. The faster
rate of change came with the paradigmatic shift of technologies. As we take the example of
TV sets, the first generation cell phones are replaced by the second and third generation
mobiles. The change of appliance technology like blackberry, android and Java etc.
furthered the replacement process.
Apart from the change of technology, some other social reasons those are responsible are
the betterment of the financial status of the people. In comparison to the earlier situation,
now these days the consumers have more purchase capacity and they have much more
wider verity of goods. Again the social prestige which forces the consumer to change the old
item, the ambition to maintain a luxurious life as well as the disinterestedness to get the
out of order equipment repaired are among these causes which contributed to the
amassment of the e-waste.
Page | 3
1.4: What is generally done with these e-waste materials!
Generally, the electronics items are thrown in the dustbin or stashed somewhere else after
it goes out of order or when its life time ends. It happens in most of the cases that after we
replace an old TV with a new one we generally don’t immediately throw it away. Rather it is
kept in the house unnecessarily. But some other electronic gadgets like CDs, audio cassettes
and floppy discs etc. are immediately thrown. These waste materials are seriously non-
biodegradable. These materials contain plastics, fibre and metals which are not composted
at all. Again those materials which are not thrown away are stashed somewhere, consume a
lot of space. These materials together are disposed and used in landfilling or burned to get
the metals. It is because of the lack of recycling facilities available in the vicinity. Almost 90
percent of the waste materials are disposed rather being recycled.
In any of the cases, it damages to the environment. In case of landfilling, the materials are
not composed and the toxic items contained in it are leached into the ground causing land
as well as the water pollution. Similarly when these items are burned, it adds to the air
pollution. It is the matter of concern that these materials are made of highly poisonous
items like lead, chromium, arsenic and mercury etc. which have the ability to cause serious
damage to the human health as well as to the environment at large.
Disposal of e-wastes is a particular problem faced in many regions across the globe.
Computer wastes that are land-filled produces contaminated leachates which eventually
pollute the groundwater. Acids and sludge obtained from melting computer chips, if
disposed on the ground causes acidification of soil. For example, Guiyu 1, Hong Kong a
thriving area of illegal e-waste recycling is facing acute water shortages due to the
contamination of water resources.
This is due to disposal of recycling wastes such as acids, sludges etc. in rivers. Now water is
being transported from faraway towns to cater to the demands of the population.
Incineration of e-wastes can emit toxic fumes and gases, thereby polluting the surrounding
air. Improperly monitored landfills can cause environmental hazards. Mercury will leach
when certain electronic devices, such as circuit breakers are destroyed. The same is true for
polychlorinated biphenyls (PCBs) from condensers. When brominated flame retardant
plastic or cadmium containing plastics are landfilled, both polybrominated diphenyl ethers
(PBDE) and cadmium may leach into the soil and groundwater. It has been found that
significant amounts of lead ion are dissolved from broken lead containing glass, such as the
cone glass of cathode ray tubes, gets mixed with acid waters and are a common occurrence
in landfills.
1
It is a place in the Guangzhou province of China where a large number of such e-wastes are shipped from the
European countries and America. There the recycling process is not taken in a scientific which results in an
alarming rate of pollution. It comes under the tenth most polluted places of the world.
Page | 4
Not only does the leaching of mercury poses specific problems, the vaporization of metallic
mercury and dimethylene mercury, both part of Waste Electrical and Electronic Equipment
(WEEE) is also of concern. In addition, uncontrolled fires may arise at landfills and this could
be a frequent occurrence in many countries. When exposed to fire, metals and other
chemical substances, such as the extremely toxic dioxins and furans from halogenated flame
retardant products and PCB containing condensers can be emitted. The most dangerous
form of burning e-waste is the open-air burning of plastics in order to recover copper and
other metals. The toxic fall-out from open air burning affects both the local environment
and broader global air currents, depositing highly toxic by products in many places
throughout the world.
Page | 5
Chronic damage to the
brain.
Relays and switches, printed Respiratory and skin
Mercury (Hg)
circuit boards disorders due to
bioaccumulation in
fishes.
1 Source: report published in 2004 by the Energy and Wetlands Group, Center for Ecological Sciences, Indian Institute of
Science, Bangalore.
Table I summarizes the health effects of certain constituents in e-wastes. If these electronic
items are discarded with other household garbage, the toxics pose a threat to both health
and vital components of the ecosystem.
Industrial production results in hundreds of millions of tonnes of wastes every year. These
wastes include chemical by-products that are hazardous to human health and the
environment because they are poisonous, eco-toxic, explosive, corrosive, flammable, or
infectious. Too often these wastes pour out of smokestacks and outtake pipes or lie
abandoned in dumps or leaky storage drums. Sometimes wastes are shipped off illegally to
faraway places, exposing unsuspecting communities to terrible dangers.
The cross-border transport of hazardous wastes seized the public’s attention in the late
1980s. The misadventures of “toxic ships” such as the Karin B and the Pelicano, sailing from
port to port, trying to offload their poisonous cargoes, made front-page headlines around
the world. These tragic incidents were motivated in good part by tighter environmental
regulations in industrialized countries. As the costs of waste disposal skyrocketed, “toxic-
traders” searching for cheaper solutions started shipping hazardous wastes to Eastern
Europe and Africa and other regions.
In view of the ill-effects of hazardous wastes to both environment and health, several
countries exhorted the need for a global agreement to address the problems and challenges
posed by hazardous waste. Also, in the late 1970s, a tightening of environmental regulations
Page | 6
in industrialized countries led to a dramatic rise in the cost of hazardous waste disposal.
Searching for cheaper ways to get rid of the wastes, "toxic traders" began shipping
hazardous waste to developing countries. Recognizing that industrial society must fix this
major flaw in the system, governments – and many forward-looking companies – started
exploring solutions as early as the 1980s. By the time, the international community
launched treaty negotiations under the auspices of the United Nations Environment
Programme. International outrage following these irresponsible activities led to the drafting
and adoption of strategic plans and regulations at the Basel Convention. In March 1989,
they adopted the Basel Convention on the Control of Trans-boundary Movements of
Hazardous Wastes and Their Disposal. The treaty entered into force in 1992 and now boasts
over 160 Parties. The Convention secretariat, in Geneva, Switzerland, facilitates and
implementation of the Convention and related agreements. It also provides assistance and
guidelines on legal and technical issues, gathers statistical data, and conducts training on
the proper management of hazardous waste.
While the world is marvelling at the technological revolution, countries like India are facing
an imminent danger. E-waste of developed countries, such as the US, dispose their wastes
to India and other Asian countries. Investigations reveals that much of the electronics
turned over for recycling in the United States ends up in Asia, where they are either
disposed of or recycled with little or no regard for environmental or worker health and
safety. Major reasons for exports are cheap labour and lack of environmental and
occupational standards in Asia and in this way the toxic effluent of the developed nations
'would flood towards the world's poorest nations. The magnitude of these problems is yet
to be documented. However, groups like Toxic Links India are already working on collating
data that could be a step towards controlling this hazardous trade. It is imperative that
developing countries and India in particular wake up to the monopoly of the developed
countries and set up appropriate management measures to prevent the hazards and
mishaps due to mismanagement of e-wastes.
In the domestic field also, there is an estimate that the total obsolete computers originating
from government offices, business houses, industries and household is of the order of 2
million nos. Manufactures and assemblers in a single calendar year, estimated to produce
around 1200 tons of electronic scrap. It should be noted that obsolete rate of personal
Page | 7
computers (PC) is one in every two years. The consumers find it convenient to buy a new
computer rather than upgrade the old one due to the changing configuration, technology
and the attractive offers of the manufacturers. Due to the lack of governmental legislations
on e-waste, standards for disposal, proper mechanism for handling these toxic hi-tech
products, mostly end up in landfills or partly recycled in a unhygienic conditions and partly
thrown into waste streams. Computer waste is generated from the individual households;
the government, public and private sectors; computer retailers; manufacturers; foreign
embassies; secondary markets of old PCs. Of these, the biggest source of PC scrap is foreign
countries that export huge computer waste in the form of reusable components.
Electronic waste or e-waste is one of the rapidly growing environmental problems of the
world. In India, the electronic waste management assumes greater significance not only due
to the generation of our own waste but also dumping of e-waste particularly computer
waste from the developed countries.
With extensively using computers and electronic equipments and people dumping old
electronic goods for new ones, the amount of E-Waste generated has been steadily
increasing. At present Bangalore alone generates about 8000 tonnes of computer waste
annually and in the absence of proper disposal, they find their way to scrap dealers.
While looking at the e-waste problem in India, it is essential to mention the E-Parisaraa, an
eco-friendly recycling unit on the outskirts of Bangalore which is located in Dobaspet
industrial area, Bangalore, which makes full use of E-Waste. The plant which is India’s first
scientific e-waste recycling unit will reduce pollution, landfill waste and recover valuable
metals, plastics & glass from waste in an eco-friendly manner. E-Parisaraa has developed a
circuit to extend the life of tube lights. The circuit helps to extend the life of fluorescent
tubes by more than 2000 hours. If the circuits are used, tube lights can work on lower
voltages. The initiative is to aim at reducing the accumulation of used and discarded
electronic and electrical equipments.
E-Parisaraa’s Director Mr. P. Parthasarathy, an IIT Madras graduate, and a former consultant
for a similar e-waste recycling unit in Singapore, has developed an eco-friendly methodology
for reusing, recycling and recovery of metals, glass & plastics with non-incineration
methods. The hazardous materials are segregated separately and send for secure land fill
for ex.: phosphor coating, LED’s, mercury etc. They have the technology to recycle most of
the e-waste and only less than one per cent of this will be regarded as waste, which can go
into secure landfill planned in the vicinity by the HAWA project. India as a developing
country needs simpler, low cost technology keeping in view of maximum resource recovery
in an environmental friendly methodology. E-Parisaraa, deals with practical aspect of e-
waste processing as mentioned below by hand.
Page | 8
Chapter 5: Management of e-wastes:
It is estimated that 75 percent of electronic items are stored due to uncertainty of how to
manage it. These electronic junks lie unattended in houses, offices, warehouses etc. and
normally mixed with household wastes, which are finally disposed off at landfills. This
necessitates implementable management measures.
In industries management of e-waste should begin at the point of generation. This can be
done by waste minimization techniques and by sustainable product design. Waste
minimization in industries involves adopting:
• Inventory management
• Production-process modification
• Volume reduction
Proper control over the materials used in the manufacturing process is an important way to
reduce waste generation2. By reducing both the quantity of hazardous materials used in the
process and the amount of excess raw materials in stock, the quantity of waste generated
can be reduced. This can be done in two ways i.e. establishing material-purchase review and
control procedures and inventory tracking system.
Developing review procedures for all material purchased is the first step in establishing an
inventory management program. Procedures should require that all materials be approved
prior to purchase. In the approval process all production materials are evaluated to examine
if they contain hazardous constituents and whether alternative non-hazardous materials are
available.
Another inventory management procedure for waste reduction is to ensure that only the
needed quantity of a material is ordered. This will require the establishment of a strict
inventory tracking system. Purchase procedures must be implemented which ensure that
materials are ordered only on an as-needed basis and that only the amount needed for a
specific period of time is ordered.
Changes can be made in the production process, which will reduce waste generation. This
reduction can be accomplished by changing the materials used to make the product or by
2
Freeman, 76
Page | 9
the more efficient use of input materials in the production process or both. Potential waste
minimization techniques can be broken down into three categories:
3
Ibid
Page | 10
5.3 Volume reduction:
Volume reduction includes those techniques that remove the hazardous portion of a waste
from a non-hazardous portion. These techniques are usually to reduce the volume, and thus
the cost of disposing of a waste material. The techniques that can be used to reduce waste-
stream volume can be divided into 2 general categories: source segregation and waste
concentration. Segregation of wastes is in many cases a simple and economical technique
for waste reduction. Wastes containing different types of metals can be treated separately
so that the metal value in the sludge can be recovered. Concentration of a waste stream
may increase the likelihood that the material can be recycled or reused. Methods include
gravity and vacuum filtration, ultra filtration, reverse osmosis, freeze vaporization etc.
This technique could eliminate waste disposal costs, reduce raw material costs and provide
income from a salable waste. Waste can be recovered on-site, or at an off-site recovery
facility, or through inter industry exchange. A number of physical and chemical techniques
are available to reclaim a waste material such as reverse osmosis, electrolysis,
condensation, electrolytic recovery, filtration, centrifugation etc. For example, a printed-
circuit board manufacturer can use electrolytic recovery to reclaim metals from copper and
tin-lead plating bath.
However recycling of hazardous products has little environmental benefit if it simply moves
the hazards into secondary products that eventually have to be disposed of. Unless the goal
is to redesign the product to use non-hazardous materials, such recycling is a false solution.
Minimization of hazardous wastes can be achieved at product design stage itself keeping in
mind the following factors such as:
• Rethink the product design: Efforts should be made to design a product with fewer
amounts of hazardous materials. For example, the efforts to reduce material use are
reflected in some new computer designs that are flatter, lighter and more integrated. Other
companies propose centralized networks similar to the telephone system.
• Use of renewable materials and energy: Bio-based plastics are plastics made with
plant-based chemicals or plant-produced polymers rather than from petro-chemicals. Bio-
based toners, glues and inks are used more frequently. Solar computers also exist but they
are currently very expensive.
Page | 11
• Use of non-renewable materials that are safer: Because many of the materials used
are non-renewable, designers could ensure the product is built for re-use, repair and/or
upgradeability. Some computer manufacturers such as Dell and Gateway lease out their
products thereby ensuring they get them back to further upgrade and lease out again.
Considering the severity of the problem, it is imperative that certain management options
be adopted to handle the bulk e-wastes. Following are some of the management options
suggested for the government, industries and the public.
Governments should set up regulatory agencies in each district, which are vested
with the responsibility of co-ordinating and consolidating the regulatory functions of
the various government authorities regarding hazardous substances.
Governments should be responsible for providing an adequate system of laws,
controls and administrative procedures for hazardous waste management (Third
World Network. 1991). Existing laws concerning e-waste disposal be reviewed and
revamped. A comprehensive law that provides e-waste regulation and management
and proper disposal of hazardous wastes is required. Such a law should empower
the agency to control, supervise and regulate the relevant activities of government
departments.
Page | 12
imposed. In particular, custodial sentences should be preferred to paltry fines, which
these outsiders / foreign nationals can pay.
Governments should enforce strict regulations and heavy fines levied on industries,
which do not practice waste prevention and recovery in the production facilities.
Polluter pays principle and extended producer responsibility should be adopted.
Governments should encourage and support NGOs and other organizations to
involve actively in solving the nation's e-waste problems.
Uncontrolled dumping is an unsatisfactory method for disposal of hazardous waste
and should be phased out.
Governments should explore opportunities to partner with manufacturers and
retailers to provide recycling services.
2. All personnel involved in handling e-waste in industries including those at the policy,
management, control and operational levels, should be properly qualified and trained.
Companies can adopt their own policies while handling e-wastes. Some are given below:
3. Companies can and should adopt waste minimization techniques, which will make a
significant reduction in the quantity of e-waste generated and thereby lessening the impact
on the environment. It is a "reverse production" system that designs infrastructure to
recover and reuse every material contained within e-wastes metals such as lead, copper,
aluminium and gold, and various plastics, glass and wire. Such a "closed loop"
manufacturing and recovery system offers a win-win situation for everyone, less of the
Earth will be mined for raw materials, and groundwater will be protected, researchers
explain.
Page | 13
5. Manufacturers of computer monitors, television sets and other electronic devices
containing hazardous materials must be responsible for educating consumers and the
general public regarding the potential threat to public health and the environment posed by
their products. At minimum, all computer monitors, television sets and other electronic
devices containing hazardous materials must be clearly labelled to identify environmental
hazards and proper materials management.
Waste prevention is perhaps more preferred to any other waste management option
including recycling. Donating electronics for reuse extends the lives of valuable products and
keeps them out of the waste management system for a longer time. But care should be
taken while donating such items i.e. the items should be in working condition.
E-wastes should never be disposed with garbage and other household wastes. This should
be segregated at the site and sold or donated to various organizations.
While buying electronic products the citizens have to opt for those that:
CHAPTER 7: Conclusion:
The problem of electronic waste is and in future, is going to be the biggest environmental
problem for the world as we are heading ruthlessly towards a technomaniac era. With the
ride of science, every technology invent today is being old and obsolete on the next day.
And our enthusiasms to update ourselves with the latest gadgets have landed us in such a
situation. The important thing is that we are caught between a dilemma as we cannot
altogether discard science and technology nor we can manage with the large volume of e-
Page | 14
waste that are being produced due to the aforesaid process. So the need of the hour is to
strike a right balance between technological advancement and waste management. The
guidelines of the Basel Action Network, the Basel Convention, the e-waste management
laws that are in the offing are useful in averting such catastrophic pollution that we are
heading to.
Page | 15
References:
Page | 16