You are on page 1of 2

CESAR BARBITSO HERNANDO

Electrical Technician
Address: Sta. Rosa, City Laguna, Philippines
Phone: +639952944687
E-mail:cesar01hernando@gmail.com
Date of Birth: October 12, 1983

CAREER OBJECTIVES

Experienced and knowledgeable electrician with more than 7 years of experience in the field seeks aposition with a
busy contractor or top electrical or construction firm in need of a hard worker with solid technical skills.

CAREER HISTORY
Stream Industrial & Engineering- Doha, Qatar
Electrical Technician, March 2017-March 2019
Perform layout and installation, testing and commissioning and scheduling of personnel. Communicate closely with
engineers and team members to identify and resolve issues.
 Layout and installation of HMI, FFCP and MCCP panel
 Assembled MCC for 7 units Fire Exhaust Fan using diagram
 Termination of control cables in HMI, FFCP and MCCP
 Testing and Commissioning of 32 units of PACU (PETRA, Jordan)
 Testing and commissioning of 60 units of SAC (PETRA, Jordan)
 Testing and commissioning of 70 units of Smoke Exhaust Fan (ELTA Fans, UK)
 Testing and commissioning of MVD and MFD (BELIMO)
 Testing and commissioning of duct heaters.
 Troubleshooting and maintaining of Electrical and HVAC system
 Liaising with the Electrical Engineer
Project: Umm Al Houl Power IWPP- Al Wakrah, Qatar

Hamad Al Alaiwi& Partners Co LTD-Riyadh, KSA


Electrician- February 2013 to February 2015
Prepare the necessary materials and permit to work specific to the task. Preparing the load schedule of the busway
to be shutdown and assess the laboratory impact using the load schedule to provide necessary backup power to the
equipment affected during the power interruption.
 Cable pulling of XLPE cables used for backup power.
 Cable pulling of Belden Cables for Laboratory Control System.
 Layout and installation of PMS.
 Termination of THHN wires in lighting and power panel.
 Termination of control wires to Supply and Exhaust Air Valves (Phoenix Controls).
 Termination of supply power cable and control cable in duct heaters.
 Testing and commissioning of Air Valves and duct heaters.
 Testing and commissioning of lighting and power panel.
 Conduct infra red scan in DB.
Project: King Abdullah University of Science & Technology KAUST- Thuwal, KSA

Saudi Oger LTD-Riyadh, KSA


Electrical Technician-December 2011 to February 2012
Maintenance of Plant and Equipment including MDB and tower cranes for new sites.
 Cable pulling of 300 size XLPE STA main feeder.
 Termination of 300 size XLPE STA cable to MDB.
 Maintaining and repairing of electrical equipment including steel bender, pump controls and tower cranes.
 Troubleshooting of temporary lightings in the site.
 Installation of 450A, 250A and 100A DB for temporary power supply.
Project: Haramain High Speed Railway-Jeddah, KSA
Abdul Aziz Al Traiki Partnership Trading &Cont Ltd-Dammam, KSA
Electrical Leadman-December 2008-February 2011
New layout of containment for LV and ELV System. Pulled cables and conducted continuity test to identify cables
prior to termination.
 PVC and G.I conduit layout and installation for normal power and UPS embedded in concrete slab.
 Layout and installation of cable tray and cable trunking.
 Cable pulling of Belden Cables for ELV system.
 Termination of wires in DB for lighting and Power Outlet.
 Installation of temporary lighting for new sites.
 Troubleshooting and repair of installed lighting and electrical equipment.
Project: King Faisal University- Al Hassa Campus, KSA

EDUCATION
Computer Engineering Technology- TUP Talisay City, Negros Oriental
1st Year Undergraduate-2004

CERTIFICATES AND TRAININGS


 Industrial Electricity
 PTW Training Course
 IOSH Managing safely
 QMS ISO 9001
 Laboratory Safety

CHARACTER REFERENCE
Engr. Quim Prado-T&C Engineer
SAMSUNG C&T
Mobile: +7431363123

Engr. Arnel Luna- ELV


ARABTEC
Mobile: +7470318095

Supv. Ramesh Vithtaya


STREAM INDUSTRIAL & ENGINEERING
Mobile: +7466671868

CERTIFICATION

I hereby certify that the informations provided in these Curriculum Vitae are true and correct.

Applicant Signature

You might also like