Professional Documents
Culture Documents
Saj Sununo Manual
Saj Sununo Manual
Integrity
cooperation
learning Innovation
G u a n g z h o u S a n j i n g E l e c t r i c C o . , LT D
Leading Provider of Drive&Zero-carbon and Energy-saving
Te c h n o l o g y
Comm connection by RS 232 to USB port cable
Option 1
By RS 232 to USB port cable.
Option 2
◆ RJ45 cable need insert to LAN ports of Router
LAN ports
Main interface introduction
Communication Settings
◆ Choose the communication port first, meanwhile Need update the USB-Driver of
keep the “Baud rate” to ”115200”, “Address” to ”1”; “RS232-USB” on your PC, if
◆ Click the “Open” and “Find” button; you can't choose the “Port” here.
2
Setting Function
2
Setting Function
4. Change the“Reconnect Time” , “Over Freq Step 1” and “Under Freq step 1”
show as below;
5
Active the setting
After set parameters ( Over/Under voltage ), need restart inverter ( Switch off DC and
Switch on again; or restart by tunner show as below ), in order to active the setting
which changed by Tunner.
2
TH
AN
KS