Professional Documents
Culture Documents
DC STICK WELDING
Standard Accessories :
INVERTER 3
Features :
• Inverter technology for easy welding
• High quality welding with low power consumption
• Compact, light weight for easy handling
• Excellent arc starting, increases the current at the beginning of the welding
• Increases the current in order to avoid the sticking when electrode enters in
10058935 10058936 10058937-10058939 melted metal
• Withdraw your electrode easily without damaging it, in case of sticking metal
AC STICK WELDING
TIG WELDING
Article No KW1400722
Description DC TIG Welding 200A With Pulse
Specification
Features : Rated Input Voltage (V/Ph/Hz) 220/1/50
• Portable and easy to Rated Input Power (kVA) 6.1
operate Welding Current Adjustment (A) 5 - 200
• Multifunction MMA and No-Load Voltage (V) 56
TIG Welding Rated Output Voltage (V) 18
Duty Cycle (%) 60
• Pulse function and down
Efficiency (%) 80
slop 0-5 S adjustable for Power Factor 0.73
200A Protection Class IP21
• Digital meter to preset Insulation Class F
and display welding Arc Ignition Mode HF
current Pulse Function With Pulse
• Wide range for input Dimension (mm) 430 x 180 x 300
power voltage 220V ± 15% Weight (Kg) 8.4
MIG-MAG WELDING
Features :
Standard Accessories : • Easy to Operate, Economical, and Practical
• 500A can use FCAW
• IGBT Inverter technology to give :
- Stable arc, deep penetration, minimal spatter
- Stable voltage output ±15% of any voltage fluctuation
• High duty cycle allows welding over longer duration
10075020 10075051 10075052
Features :
• IGBT inverter technology Article No 10066875
• Digital control system offers greater stability of Description Dent Pull Welding IGBT-INV STEEL 6.4KVA
the output power.
Specification
• Automatic mains voltage monitoring.
• Overheat protection. Rated Input Voltage (V/P/Hz) 380 / 3 / 50-60
• Stepless current regulation. Rated Input Power (kVA) 6.4
• Designed to repair different kinds of car steels
Input Current (A) 54/18
such as conventional steel, stainless steel, etc.
• Various welding procedures are available such Max Welding Current (A) 2600
as shrinking, washer welding, dent pulling spot Output Voltage (V) 1-13
welding, flattening, waveform wire welding, One Side Welding Thickness (mm) 0.8+1.2
stud welding, OT washer welding, triangle
washer welding etc. Operation Way Electronic Timer Continuosly
• High precision time and power adjustment Welding Time (S) 0-99
system. Dimension (mm) 550 x 650 x 1110
• Inverter technology with high efficiency, energy
consumption can be reduced up to 50% Weight (Kg) 42
Standard Accesories:
Features :
• Main body made of high strength aluminium
• Speed system is adjusted by integrated circuit
• Can be use for bevel and groove cutting
Article No KW1400156
Description H-Beam Gas Cutting Machine
Specification
Rated Input Voltage (V/Ph/Hz) 220/1/50
With Rail Cutting Thickness (mm) 6 - 60
Cutting Width (mm) 150 - 800
Cutting Height (mm) 150 - 400
Cutting Speed (mm/min) 50 - 750
Dimension (mm) 250 x 170 x 260
Weight (Kg) 30
Features :
• Main body made of high strength aluminium
• Speed system is adjusted by integrated circuit
• Can be use for bevel and groove cutting
• Especially for cutting of circular part, round hole and flange
Article No KW1400158
Description Circular Gas Cutting Machine
Specification
Rated Input Voltage (V/Ph/Hz) 220/1/50
Cutting Thickness (mm) 6 - 100
Ø Circle Cutting (mm) 30 - 600
Cutting Speed (mm/min) 0.2 - 60
Dimension (mm) 750 x 300 x 700
Weight (Kg) 28
Features :
PIPE CUTTING MACHINE • Main body made of high strength aluminium
• Chain belt to tie the pipe
• Adjustable chain belt as per diameter of pipe
• Bevel angle I.Y.V (45°)
Article No KW1400160 KW1400494
Description Pipe Cutting Machine Pipe Cutting Machine Automatic
Specification
Rated Input Voltage (V/Ph/Hz) 220/1/50
Cutting Thickness (mm) 6 - 50 6 - 30
Cutting Speed (mm/min) Manual 50 - 1150
Ø Pipe Cutting (mm) 150 - 600
Dimension (mm) 420 x 280 x 450 260 x 420 x 450
KW1400160 KW1400494
Weight (Kg) 13 16
Article No KW1400493
Description Semi Automatic Gas Cutting Machine
Specification
Rated Input Voltage (V/Ph/Hz) 220/1/50
Cutting Thickness (mm) 6 - 30
Ø Circle Cutting (mm) 50 - 550
Cutting Speed (mm/min) 50 - 100
Dimension (mm) 460 x 360 x 240
Weight (Kg) 10.5
REGULATOR With
Heater
Flowmeter set
Argon Gas Saving Regulator CO2 Gas Saving Regulator Rubber Hose Economization
value
10006040 10006071 Econo-Flow Consumption
at welding start
Length (m) Percentage (%)
(L/min)
Argon Welding
Without 1910
3 53.9
With 880
5
Without 2390
10 62.5
With 896
Article No 10006040 10006071 Without 2190
3 27.4
With 1590
Argon Gas Saving CO2 Gas Saving 10
Description Without 2546
Regulator Regulator 10 34.4
With 1671
Specification CO2 Welding
Without 3283
Gas Service Argon, AR/CO₂ Mix CO₂ 10 28.4
With 2350
Outlet Pressure Preset (PSI) 50 50 Without 3750
15 20 31.6
With 2563
Inlet Gauge (PSI) 2” , 4000 2” , 4000 Without 4190
30 35.4
Flowmeter (SCFH) 60 60 With 2706
Inlet Connection CGA580 CGA320 Without 4050
10 22.3
With 3145
Outlet Connection 5/8” - 18RH (F) 5/8” - 18RH (F) Without 4440
20 20 25.5
Supply Voltage (Volt/Watt) - 220 VAC / 190 W With 3305
Without 4841
Dimension (mm) 210 x 190 x 110 210 x 190 x 190 30 29.2
With 3429
ELECTRODE HOLDER
MIG-MAG WIRE
Size Weight
Article No. Description (mm) (kg)
KW1400191 Solid Wire AWS ER 70S-6 0.8 15
KW1400265 Solid Wire AWS ER 70S-6 1.0 15
Flux Cored Welding Wire AWS
KW1400675 1.0 15
E71T-1
Flux Cored Welding Wire AWS
Solid Wire Flux Cored Wire KW1400676 1.2 15
E71T-1
RAIL
KW1400187 KW1400075
KW1400075 compatible for KW1400153,154,155
KW1400187 compatible for KW1400157,493
TUNGSTEN ELECTRODE