a) Study of gear parameters 1. Experimental study of velocity ratios of simple, compound, b) Epicyclic and differential gear trains Kinematics of Four Bar, Slider Crank, Crank Rocker, Double a) 2. crank, Double rocker, Oscillating cylinder Mechanisms b) Kinematics of single and double universal joints Determination of Mass moment of inertia of Fly wheel and Axle a) system. Determination of Mass Moment of Inertia of axisymmetric bodies 3. b) using Turn Table apparatus. Determination of Mass Moment of Inertia using bifilar suspension c) and compound pendulum 4. Motorized gyroscope – Study of gyroscopic effect and couple Governor - Determination of range sensitivity, effort etc., for 5. Watts, Porter, Proell, and Hartnell Governors Cams – Cam profile drawing, Motion curves and study of jump 6. phenomenon Single degree of freedom Spring Mass System – Determination of a) natural Frequency and verification of Laws of springs – Damping 7. coefficient determination. Multi degree freedom suspension system – Determination of b) influence coefficient a) Determination of torsional natural frequency of single and Double 8. Rotor systems.- Undamped and Damped Natural frequencies.
b) Vibration Absorber – Tuned vibration absorber
Vibration of Equivalent Spring mass system – undamped and 9. damped vibration Whirling of shafts – Determination of critical speeds of shafts with 10. concentrated loads a) Balancing of rotating masses. 11. b) Balancing of reciprocating masses a) Transverse vibration of Free-Free beam – with and without concentrated masses 12. b) Forced Vibration of Cantilever beam – Mode shapes and natural frequencies c) Determination of transmissibility ratio using vibrating table.