Professional Documents
Culture Documents
10. After stating the name of the project and date when you requested the
materials, what will be the next step in requisitioning?
a. Enumerate the materials with their description
b. List the cost per unit and the total cost
c. Write your name as requisitioner and secure the approval of authorities
d. Write the number and the unit of materials to be requisitioned.
11. What is the last part of the requisition form that you need to
accomplish?
a. Enumerate the materials with their description
b. List the cost per unit and the total cost
c. Write your name as requisitioner and secure the approval of authorities
d. Write the number and the unit of materials to be requisitioned.
12. If you are the one assigned in receiving the requested materials and
tools, what should be the first step to do?
a. Sign the requisition form as you receive the materials and tools.
b. Check if the materials and tools including the accessories are complete.
c. Check the physical condition of the materials and tools.
d. If any of the materials and tools is found missing or defective, report it
immediately to the supply officer or teacher.
13. After finding out that the materials and tools you received are complete
and in good condition, what should be the last step to do?
a. Sign the requisition form as you receive the materials and tools.
b. Check if the materials and tools including the accessories are complete.
c. Check the physical condition of the materials and tools.
d. If any of the materials and tools is found missing or defective, report it
immediately to the supply officer or teacher.
14. In conducting and inventory of tools and equipment, what should not be
done?
a. Record the number of non-functional tools and equipment
b. Report the number of tools and equipment that are non-functional but
subject for repair
c. Throw away tools and equipment which are condemnable
d. Segregate tools that are serviceable or unserviceable
15. After the inventory, you return the tools and equipment in the cabinet
according to:
a. brand c. operating procedures
a. date of purchase c. size
16. You will measure a table, what will you consider in selecting a measuring
instrument to use?
a. brand c. job requirements
b. date of purchase d. size
18. Compute the board foot of lumber whose dimension is: T = 2”, W= 8”,
L=12’
a. 14 Bd. Ft. b. 16 Bd. Ft. c. 18 Bd. Ft. d. 20
Bd. Ft.
20. How will you show the inner part of this box?
21. How will you show the first half (a) of the rectangle?
24. In dealing with accident in the work place, what should be the first thing
to do?
a. Run outside of the work area
b. Call the attention of the principal
c. Keep calm, don’t panic and study the situation
d. Bring the patient to the hospital
26. You will cut irregular shape on a small board, which tool is applicable for the
job?
a. Back saw b. Compass saw c. Coping saw d. Dovetail saw
28. You will pull out big nails or objects from the wood, what tool is
appropriate to use?
a. Ball peen hammer b. Claw hammer c. Crow bar d. Sledge
hammer
29. The teacher asked Mario to test the squareness of a stock, what tool is
he going to use?
a. Level bar b. Pull push rule c. Ruler d. Try Square
30. You want to test the vertical alignment of the stairs, what tool is
appropriate
to use?
a. Meter Stick b. Pull-push Rule c. Plumb bob d. Spirit Level
31. You want to trim and shape the leg of your chair, which tool is applicable
for the job?
a. Cabinet scraper b. Chisel c. Place d. Spoke Shave
32. Which portable powertool is appropriate in cutting curved or irregular
shapes of wood surfaces?
a. Circular saw b. Jigsaw c. Router d. Sander
37. Which line is used to show edges and contours not visible to the eye?
a. Center line b. Construction line c. Dimension line d.
Invisible line
39. Isometric means equal measures of the angles form by its three axes,
which is not included?
a. 30o left horizontal axis c. right horizontal axis
b. 45o left horizontal axis d. vertical axis
43. In making a picture frame, the first step is gathered the materials
needed.
What is the next step?
a. Cut the desired joints c. Layout the miter joints
b. Measure the desired dimension d. Assemble the cuffed joints
45. One of the steps in wood finishing is the application of the desired
finishing material. If you want to create a hard, glossy film on your picture
frame, what will you apply?
a. paint b. shellac c. varnish d. wax
46. You find it difficult to cut a 1” x 1” x 1” wood. What tool will help you to
hold the wood while cutting?
a. Bar Clamp b. Bench Vise b. C-Clamp d. Vise Grip
47. You noticed that the pliers in your house have rust, which substance
you’re going to use to remove the rust?
a. oil b. paint c. varnish d. wax
49. You want to remove the nail on your chair but you don’t have a claw
hammer, what will you do? c. Cover the nail with a
epoxy
a. Use a plier to remove the nail d. Wait until the claw
hammer
b. Use any tool available to bend the nail is available
50. Which of the following statements is not applied in taking care and
maintaining tools?
a. Saws should be kept dry at all times
b. Do not allow the tools to rust
c. Clean the tools with soap and water
d. Use the right tool at the right job
51. Your teacher asked you to arrange the wood from shortest to longest.
Which is the shortest?
a. 1 1/4” b. 1 ½” c. 1 ¾” d. 1 8/16”
52. If 1’ is equal to 12”, how many inches are there in a 6 feet long wood?
a. 70 b. 72” c. 74” d. 76”
53. It’s written on the signage that you are 2 kilometers away from the site,
how many meters is it?
a. 1,000 meters b. 1, 200 meters c. 1,500 meters d. 2,000
meters
54. Your teacher assigned you to draw a table on a sheet of paper but you
must draw a line on all sides of the paper. What line will you use?
a. border line b. center line c. dimension line d. hidden
line
55. You want to hide the hidden edges of a table, what line are you going to
use?
a. border line b. center line c. dimension line d. hidden
line
56. You want show the measurement of a table, what line are you going to
use?
a. border line b. center line c. dimension line d. visible
line
57. You want to show the outline of the object that includes perimeter or
boundary shown in each view of the table, what line will you use?
a. border line b. center line c. dimension line d. visible
line
58. Which is the appropriate PPE you will wear when carrying heavy objects
or machines?
a. Ear muffs b. Gloves c. Goggles d. Safety shoes
60. Which do you think is the best PPE you will use when you are exposed to
dust and fumes? Why?
a. Apron because it is used to protect against flying debris.
b. Face mask because it is used to prevent the inhalation of spray paint.
c. Goggles because it is used to protect the eyes against flying debris and
harmful liquids.
d. Gloves because it is used to protect the hands while working?
Prepared by:
GROUP 1 - Woodworking/Carpentry
Leader:
Elvira B. Paragas - Dr. Juan G. Nolasco High School
Members:
1. Gerlie L. Hernandez - Dr. Juan G. Nolasco High School
2. Ronel G. Padua - Dr. Juan G. Nolasco High School
3. May T. Combalicer - C.D. Garcia High School
4. Agnes A. Samosa - C.D. Garcia High School
5. Ester A. Cañezal - Aguinaldo High School
6. Sally F. Marcelino - MLQU High School
7. Rogelio M. Caranyaga - MLQU High School
8. Wilfredo B. Bacay - Lakandula High School
9. Emelita O. Ramos - V. E. Fugoso High School
10. Melinda T. Marquez - Araullo High School
KEY TO CORRECTION
1 PERIODIC TEST IN GRADE 8
st
WOODWORKING/CARPENTRY
1. A 31. B
2. A 32. B
3. C 33. B
4. B 34. D
5. D 35. C
6. B 36. C
7. C 37. D
8. B 38. B
9. A 39. B
10. C 40. B
11. C 41. B
12. B 42. A
13. A 43. B
14. C 44. D
15. C 45. D
16. C 46. A
17. B 47. A
18. B 48. C
19. C 49. D
20. B 50. C
21. D 51. A
22. C 52. B
23. D 53. D
24. C 54. A
25. B 55. D
26. C 56. C
27. B 57. D
28. C 58. D
29. D 59. A
30. C 60. B