Professional Documents
Culture Documents
Prime Standby
S
PP1000S 1000 kVA / 800 kW 1100 kVA / 880 kW 50Hz
General
PowerPro generating sets are skillfully designed monobloc units linking the technical capabilities of appropriately
sized, world-renowned Perkins diesel engines with high performance, premium quality alternators. They provide a
comprehensive range of machines offering long-life, efficiency and reliability. These units are recommended as
prime power or stand-by sources for industrial, commercial and residential applications, suited to most ambient
conditions likely to be encountered around the globe. All PowerPro generating sets benefit from the major
component suppliers’ international warranties and these are complemented by our full after-sales support and
spares package.
Optional Extras
● Automatic mains-failure control systems.
● Multi-set or mains synchronisation and load sharing controls.
● Acoustic and weather-protecting enclosures.
● ISO containerised sets.
● Mobile trailer units.
● Consumable and overhaul spares package.
PP 1000S
General data
● Prime power 1000 kVA/ 800 kW
● Standby power 1100 kVA/ 880 kW
● Engine Perkins 4008TAG2A
● Alternator Stamford HCI634J
● Controller Deepsea DSE8610
● Voltage 400/ 230 V
● Voltage regulation ±0.5%
● Voltage regulator AVR
● Frequency regulation ±0.5%
● Speed governor Electronic
● Prime power fuel consumption 215 l/h
● Dimension Open (L x W x H) 4970 x 2165 x 2230 mm
● Dry weight 6750 kG
● Fuel tank N/A
Overall dimension
Notes:
● All figures based on power factor of 0.8, engine manufacturers data at NTP and use of Newage
alternators with output voltage of 380V.
● All single phase ratings assume voltage of 230V and are based upon reconnectable or dedicated
woundmachines - as per availability.
● All dimensions and weights are approximate in cm's and kg's and CBM figures reflect an
approximate packed volume.
● Fuel consumption is based upon litres/ hr @ 100% load assuming fuel meets standards laid down in
ASTM-D2.
● Addition of options may change performance and dimension details shown above
● Prime rating allows continuous operation with a 10% overload for any one hour in twelve.
Standby is a continuous rating with no overload capacity and an annual limitation as to usage at full
load.
● All data is given in good faith but is subject to change based upon our technical improvements or
those notified by the major component suppliers.
PP
PSP1000S
800
Engine data Alternator data
● Make & model Perkins ● Make & model Stamford HCI634J
4008TAG2A ● Voltage AVR
● Revolution per minute 1,500 ● Insulation system Class H
● Gross prime power 899 kW ● Protection IP23
● Gross standby power 985 kW ● Rated power factor 0.8
● Configuration Vertical in-line
8 cylinder ● Apparent output power 1000 kVA
● Cycle 4 stroke ● Actual output power 800 kW
● Induction system Turbocharged
and air-to-air charge cooled
● Combustion system Direct injection
● Cooling system Water-cooled
● Bore x Stroke 160 x 190 mm
● Displacement 30.561 litres
● Compression ratio 13.6:1
● Total lubrication capacity 153 litres
● Total coolant capacity 143 litres
Control data
DSEGenset