Professional Documents
Culture Documents
Operating Manual: AE-100 Coal Flow Monitor
Operating Manual: AE-100 Coal Flow Monitor
Operating manual
a band-pass filter
a linear amplifier
a comparator
a relay output
a trigger
Ⅲ.Working principle
When the coal flow passes through the sensor, the sensor
outputs an electric signal which is selected by the band-pass
filter and then is amplified and compared by a signal after the
electric signal output by the sensor is selected. Finally, the
on-off condition of a relay is triggered by a trigger.
Ⅳ. Technical parameter
1. power supply voltage: AC110V (-5~10)% 50HZ
2. environmental temperature: -20-50℃
3. passive contact output
4. The sensor is connected with the casing of the sensor by a
shielding cable with four cores per square meter and a shielding
layer.
Ⅴ. The detection of sensitivity and the adjustment of delayed
alarm time for coal interruption.
Ⅵ. Terminal connection
1. power supply plate terminal connection:
1 2 3 4 5 6
open close
22 11
GND Out
44 33