Professional Documents
Culture Documents
Etab Csi Main Features or Commands
Etab Csi Main Features or Commands
https://www.csiamerica.com/products/etabs/features
https://www.slideshare.net/AsayeDilbo/etabs-tutorial
https://www.udemy.com/etabscourse/
Current price₹430
Original Price₹12,800
Discount97% off
8 hours left at this price!
Add to cart
Buy now
30-Day Money-Back Guarantee
This course includes
Certificate of Completion
Have a coupon?
Share
Even better than free lunch
The ultimate employee benefit: learning. Give your team access to 3,000+ courses.
Try Udemy for Business
What you'll learn
Linear Static Analysis of RCC Structures
Linear Dynamic Analysis of RCC Structures (Response Spectrum Analysis)
Non Linear Static Analysis of RCC Structures
Design of Industrial Heavy Structures
Design of Space Truss Structures
Design of 23 Storey RCC Building as per Indian Standards
Design of Raft Foundation in ETABS and SAFE
Export Reactions from ETABS to SAFE for Foundation Design
Design of Steel Structures as per AISC360 and IS800
Design of RCC Structures as per IS1893 , IS456 and IS13920
ETABS Editor File
Basics of Strucutral Dynamics and Tall Buildings Response
Modal Analysis of RCC and Steel Structures
See more
Requirements
System with ETABS Installed
Basic Knowledge of Structural Engineering
Description
1. For Moderate/Expert Users
There are three types of Analysis covered in this Tutorial Series.
1. Linear Static Analysis.
2. Non-Linear Static Analysis (Pushover Analysis)
3. Linear Dynamic Analysis (Response Spectrum Analysis)
The design codes covered are American and Indian Standards with Introduction to
European Standards.
Case study 1 - Design of Pre-Engineered Building Steel Structure as per Indian
Standards.
Steel Structures especially PEB are somewhat tricky to model, analyze and design.
Majority of the people are comfortable in RCC Design, but very few are expert in Steel
Design. After covering this section , you will be able to calculate wind and seismic loads
as per the Indian Standards , Model the Steel Structures i.e. Portal , Plan Bracing and
Elevation Bracing, Analyze , Review the Modal Shapes and Design the Structure.
Instructor will also teach you how to do the value engineering and optimize the Steel
Structures. At the end of this lecture series , you will be comfortable with Steel
Structures.
Case study 2- Linear Dynamic Analysis and Design of Bill Board Steel Structure
as per Indian Standards.
Bill Boards are supported on the very large Cantilever Steel Structures. You will learn
how to plan the basic Structural System, which can resist the high wind and high seismic
loads. You will learn how to do the dynamic analysis of the Steel Structure. Modal
Analysis is a very important part. You will also learn how to improve the Mode Shapes ,
how to check the Fundamental Time Period. At the end , you will be able to understand
how to design the Steel Structure. Value Engineering and Optimization is also taught in
the end. Instability also become an integral part of ETABS modellers. You will learn how
to remove the Instabilities.
Case study 3- Linear Dynamic Analysis and Design of Industrial Heavy Steel
Structure as per American Standards
Industrial Heavy Structures looks very difficult and confusing in the beginning. They may
be a nightmare in the beginning for Novice Engineers, but in this lecture series , you will
learn how to do the basic Steel Structure Planning, How to Plan the Plan and Elevation
Bracing. You will learn what are the basic Mode Shapes for Industrial Heavy Structures.
You shall also learn how you can do the Dynamic Analysis of the Structures. In the end ,
you will learn how to design the Steel Structures as per AISC 360. A separate lecture is
given at the end for Connection and Base Plate Design.
Case study 4- Linear Dynamic Analysis and Design of Steel Space Truss
Structures for American Standards
Space Truss Structures are very unique in the way how force travel in them. A big space
truss is first taught how to model , then analyze and in the end design as per the
American Standards. You will learn more about the mode shapes of the huge structures.
In the end , you will be comfortable with how the Steel Space Truss Structures can be
Designed.
Case study 5- Non-Linear Static Analysis or Pushover Analysis of the Structures
In the last decade , much has been written on the push over analysis. How the push
over analysis is superior to Static Push over Analysis , but very few people actually know
how to do the push over analysis. Even experts in the Structural Engineering Field Shy
away from this topic.
In this lecture series , you will learn how to make the push over curve and find the
Performance Point. What it really means to push the Structure up to a certain
displacement. How the Response Spectrum Curve needs to be aligned with the
Pushover Curve to find the Performance Point. In the end , you will be able to access the
Performance of the Structure. Axial , Shear and Moment Hinges are explained with the
help of slides.
Case study 6- Linear Dynamic Analysis of 23 Story High Rise Structure as per
Indian Standards
In this lecture series , you will learn how to read the Architecture Drawings , How to Do
the basic planning of the Structural Elements.
The important widely asked questions that will get answered in this lecture series are
1. What is the difference between flexible and rigid diaphragms and how to assign the
diaphragms to the RCC Slab ?
2. How to do P-Delta Analysis
3. How to do the Scaling of the Response Spectrum values to the Static Earthquake
Analysis Values.
4. How to Read the ETABS Editor File ?
5. How to Design the Shear Wall ?
6. How to Export the reactions to SAFE and Design the Raft in SAFE ?
These six questions are very important to understand for any Structural Engineer for
designing any Structure in ETABS.