You are on page 1of 4

7/18/2019 OTN part 2

Enterprise 1  Language |
RECOMMENDED
Huawei Enterprise
Community Forums Groups Collections Rewards FAQ
Support Community
1

 Community  Forums  Transmission Network  OTN part 2 GPON

OTN part 2 Highlighted

2
Created: May 31, 2018 16:26:18 Latest reply: Nov 29, 2018 12:30:32  1441  5  1  0
The delay occurs when the FC80

View the author #1


V84083177
3
Advantages of the OTN
 
How is the 155M rate calculated?
91 62

4 Follow

OTN/DWDM Optical-Layer Overh


Post

About U2000 Password

Multiplex Frame & MappingRelationship of OTN

https://forum.huawei.com/enterprise/en/OTN-part-2/thread/452913-875 1/6
7/18/2019 OTN part 2

OTN Evolution Route: MS-OTN (POTN/POTS) RECOMMENDED

GPON

The delay occurs when the FC80

How is the 155M rate calculated?

OTN/DWDM Optical-Layer Overh

5
MS-OTN: Multi Service -OTN
POTN: Packet - OTN About U2000 Password
POTS: Packet Optical Transport System
POTN&POTS is a subset of MS-OTN, arehybrid transmission equipment facing the All IP era

WDN OTN System Division

OTU(Optical Transponder Unit) board, whichcan be called as Optical wavelength conversion board: The client
service first bepackaged, mappingconvergence and other processing, outputstandard optical signals of WDM
system.SDN/SONET、ATM、IP、Ethernet are converted into OTUk(suchas OTU1(2.5G)、OTU2(10G)、
OTU3(40G)、OTU4(100G)、OTU Flex(2.5G~10G adjustable))signals. There are
PluggableOpticalModules(including Client side(CR) and line side(LR)) on OTU board , Client side(CR) receive a
variety ofsignals, after conversion, the line side send out OTUksignal.

OneOUT board can sendand receive signals.

OMU&ODU(like Mux/M40/D40): OpticalMultiplexer/Demultiplexer boards, it combine n-wavelength from n OTU


boards, and then send out the combined wave. OMU do not insert opticalmodule, only connected with a single
https://forum.huawei.com/enterprise/en/OTN-part-2/thread/452913-875 2/6
7/18/2019 OTN part 2

fiber. One OMU can onlysend or receive waves, can not transmitand receive simultaneously.
RECOMMENDED
Amplifier OA: In the middle of the long-distancetransmission, to add some amplifiers foramplifying signals to extend
the transmission distance.
1

Demultiplexer ODU: receive the combined wave, and then restored to the original n-thwave, send to the OTU GPON
service board.

The delay occurs when the FC80

What is OTU(Transponder)?

How is the 155M rate calculated?

OTN/DWDM Optical-Layer Overh

About U2000 Password

BER: Bit Error Ratio

3R function: Regeneration, Reshaping, Re-timing

OTU =Optical Transmit Unit, also called Transponder

OTU Converts Client Signals into SpecificWavelength

https://forum.huawei.com/enterprise/en/OTN-part-2/thread/452913-875 3/6
7/18/2019 OTN part 2

OTU Principle is based on 10G NRZ/RZ Modulation


RECOMMENDED

GPON

The delay occurs when the FC80

How is the 155M rate calculated?

OTN/DWDM Optical-Layer Overh

5
OTU Working principle is also based on FEC
(Forward Error Correction coding) About U2000 Password

FEC is a widely used coding technique in communication system.


Basic Principle: FEC is accomplished by adding redundancy to the transmitted information using an algorithm.
A redundant bit may be a complex function of many original information bits. The original information may or
may not appear literally inthe encoded output; codes that include the unmodified input in the output are
systematic, while those that do not arenon-systematic.

From group: Transport&Access Network


This post was last edited by V84083177 at 2018-05-31 20:47.

 Helpful (1)  Favorite(0)  Share

https://forum.huawei.com/enterprise/en/OTN-part-2/thread/452913-875 4/6

You might also like