This document provides a summary of supply and equipment details for a horizontal vessel named HC SKIM DRUM (7V-1106). Key details include:
- Quantity of 1 unit
- Dimensions of 1450-9.0mm I.D x 3900mm TL/TL
- Design and working pressure of 15 bar(g)@80oC upper/-20oC lower
- Materials of SA 516 GR. 70 (Normalized) A20/S5 shell and head
- Lifting trunnions and lugs with a safety factor of 4.0
- Manway diameter of minimum 18" with davit
- Internals include a vortex breaker on the liquid
This document provides a summary of supply and equipment details for a horizontal vessel named HC SKIM DRUM (7V-1106). Key details include:
- Quantity of 1 unit
- Dimensions of 1450-9.0mm I.D x 3900mm TL/TL
- Design and working pressure of 15 bar(g)@80oC upper/-20oC lower
- Materials of SA 516 GR. 70 (Normalized) A20/S5 shell and head
- Lifting trunnions and lugs with a safety factor of 4.0
- Manway diameter of minimum 18" with davit
- Internals include a vortex breaker on the liquid
This document provides a summary of supply and equipment details for a horizontal vessel named HC SKIM DRUM (7V-1106). Key details include:
- Quantity of 1 unit
- Dimensions of 1450-9.0mm I.D x 3900mm TL/TL
- Design and working pressure of 15 bar(g)@80oC upper/-20oC lower
- Materials of SA 516 GR. 70 (Normalized) A20/S5 shell and head
- Lifting trunnions and lugs with a safety factor of 4.0
- Manway diameter of minimum 18" with davit
- Internals include a vortex breaker on the liquid
Horizontal vessel with Support Saddle 15 bar(g)@80oC upper/-20oC lower ATM pressure Working Pressure. ASME Section VIII Division 2, GFS IG 31.87.72 & T-14.000.025 Code Stamped Design and Working Pressure shall be boldly engraved on nameplate and stamped on vessel 100% X-Ray PWHT Required.
MATERIALS SA 516 GR. 70 (Normalized) A20/S5 SHELL AND HEAD MATERIAL
CORROSION ALLOWANCE 3mm
VESSEL SUPPORT Saddles for Horizontal vessel per S 22.005
Earthing boss per S 68.004
LIFTING/TRUNNIONS/LUGS LiftingTrunnions per S 10.115
Lifting Lugs with 4.0 Safety Factor Attached with Full penetration weld (where applicable)
MANWAYS Minimum manway Diameter 18” with Davit See Drawing S10.070
PAINTING Per T-14.192.028
NOZZLES see Datasheet P711-RC-E-20256
INTERNALS VORTEX BREAKER ON LIQUID OUTLET See Drawings S 10.010
REFERENCED DOCUMENTS see Datasheet P711-RC-E-20256