Professional Documents
Culture Documents
Page 1 of 3
Previous Screen
Welcome: r462het
Product: WHEEL LOADER
Model: 938G WHEEL LOADER 9HS
Configuration: 938G WHEEL LOADER 9HS00001-UP (MACHINE) POWERED BY 3126 Engine
Service Magazine
1998/05/04
Media Number -SEPD0415-00 Publication Date -04/05/1998 Date Updated -04/05/1998
IT38F (6FN),
IT38G (7BS, 1CW) Integrated Toolcarriers, 936F (8AJ),
938F (2RM, 7SN),
938G (4YS, 9HS) Wheel Loaders
Service Magazine SEPD0415, Article 29, Page 26, May 4, 1998; "Correction To 9C-8172
Brake & Planetary Group".
In the product identification section of this article the 938F Wheel Loader is shown with an
incorrect serial number prefix. The 8RM prefix should be changed to 2RM.
Reference: Parts Manual, SEBP2003-01, 936F (8AJ1-Up) Wheel Loader; Page 165, "9C-8172 Brake
& Planetary Group".
Reference: Parts Manual, SEBP2381-02, IT38F (6FN1-Up) Integrated Toolcarrier; Page 151, "9C-
8172 Brake & Planetary Group".
Reference: Parts Manual, SEBP2374-01, 938F (7SN1-Up) Wheel Loader; Page 157, "9C-8172 Brake
& Planetary Group".
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 12/06/2019
938G WHEEL LOADER 9HS00001-UP (MACHINE) POWERED BY 3126 Engine(SE... Page 2 of 3
Reference: Parts Manual, SEBP2362-02, 938F (2RM1-Up) Wheel Loader; Page 147, "9C-8172
Brake & Planetary Group".
Reference: Parts Manual, SEBP2643, IT38G (1CW1-Up) Integrated Toolcarrier; Page 179, "9C-8172
Brake & Planetary Group".
Reference: Parts Manual, SEBP2572, IT38G (7BS1-Up) Integrated Toolcarrier; Page 182, "9C-8172
Brake & Planetary Group".
Reference: Parts Manual, SEBP2681, 938G (9HS1-Up) Wheel Loader; Page 202, "9C-8172 Brake &
Planetary Group".
Reference: Parts Manual, SEBP2566-01, 938G (4YS1-Up) Wheel Loader; Page 270, "9C-8172
Brake & Planetary Group".
The 9C-6342 Thrust Washer in the 9C-8172 Brake & Planetary Group is shown incorrectly. The
thrust washer should be rotated 180° and positioned as shown in Illustration 1. This change should be
made in the parts books listed.
Also, the 4E-2166 Planetary Carrier in the 9C-8172 Brake & Planetary Group should not have flats at
the locations where the 29 tooth planetary gear is located. The flats in the planetary carrier should be
corrected as shown in Illustration 1. This change should also be made in the parts books listed.
Illustration 1.
9C-8172 Brake & Planetary Group
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 12/06/2019
938G WHEEL LOADER 9HS00001-UP (MACHINE) POWERED BY 3126 Engine(SE... Page 3 of 3
Copyright 1993 - 2019 Caterpillar Inc. Wed Jun 12 21:19:16 EST 2019
All Rights Reserved. r462het
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 12/06/2019