Professional Documents
Culture Documents
Page 1 of 6
WMGOutreach@warwick.ac.uk
6) Select SKETCH Fillet.
7) After entering radius 6 for the 1st corner, move on to do the same on
each of the other corners. Then click Stop Sketch in top right of screen.
Page 2 of 6
WMGOutreach@warwick.ac.uk
9) Select SKETCH Offset and click on
your shape – the offset curve appears.
Type -1.5 in the box here or in the
dialogue box to offset 1.5mm inside the
edge of the object. Click OK to finish.
Page 3 of 6
WMGOutreach@warwick.ac.uk
13) Select SKETCH 2-Point
Circle.
Click on the face of the shape
to select it.
15) Click to start the circle, make the diameter 4mm, press
Enter to lock the value, then Stop Sketch.
Page 4 of 6
WMGOutreach@warwick.ac.uk
18) Select MODIFY Fillet or use
the keyboard shortcut F.
Click OK to finish.
Page 5 of 6
WMGOutreach@warwick.ac.uk
21) Click on CREATE Extrude
or just press E on the
keyboard to select Extrude.
Page 6 of 6
WMGOutreach@warwick.ac.uk