1. This is a request form for non-destructive testing (NDT) on welding joints and materials.
2. It requests details on the type of NDT, dates, examiner, number of joints to be examined, welding and material details.
3. The form must be submitted by 12:00 to the QC department for approval before NDT can be carried out.
1. This is a request form for non-destructive testing (NDT) on welding joints and materials.
2. It requests details on the type of NDT, dates, examiner, number of joints to be examined, welding and material details.
3. The form must be submitted by 12:00 to the QC department for approval before NDT can be carried out.
1. This is a request form for non-destructive testing (NDT) on welding joints and materials.
2. It requests details on the type of NDT, dates, examiner, number of joints to be examined, welding and material details.
3. The form must be submitted by 12:00 to the QC department for approval before NDT can be carried out.
PROJECT QUALITY ASSURANCE & CONTROL WI-QC-FRM-07-A PAGE of
UNIT: REV.
FORM PENGAJUAN PELAKSANAAN NDT
NDT REQUEST FORM
REQUEST FORM NO.
: / / NDT / 2011 / Note: Nomer Request Form diatas harap dituliskan pada lembar NDT Report & Time Sheet terkait untuk Traceability.
Kontraktor : Jenis Pemeriksaan / Type of Examination*
Contractor Radiographic Test (RT) Areal Kerja : Vacuum Test (VT) Working Area Magnetic Test (MT) Tanggal Pelaksanaan : Ultrasonic Test (UT) Inspection Date Other: Pemeriksa : * Pilih sesuai kebutuhan / pick as needed. Examiner Cautions : : Joints ( Sheets) Request Form ini harap diserahkan maks TOTAL pukul 12:00 WIB kepada QC