The document provides wiring instructions for connecting an RJ45 to 9-pin sub-D connector cable between an OMT and a DU for an RBS 6000S. It connects pin 1 on the RJ45 to pin 5 on the 9-pin connector, pin 2 to pin 3, and pin 3 to pin 2. It also describes using a hyperterminal to connect to the node B test port via the cable to get the IP address, including the login credentials.
The document provides wiring instructions for connecting an RJ45 to 9-pin sub-D connector cable between an OMT and a DU for an RBS 6000S. It connects pin 1 on the RJ45 to pin 5 on the 9-pin connector, pin 2 to pin 3, and pin 3 to pin 2. It also describes using a hyperterminal to connect to the node B test port via the cable to get the IP address, including the login credentials.
The document provides wiring instructions for connecting an RJ45 to 9-pin sub-D connector cable between an OMT and a DU for an RBS 6000S. It connects pin 1 on the RJ45 to pin 5 on the 9-pin connector, pin 2 to pin 3, and pin 3 to pin 2. It also describes using a hyperterminal to connect to the node B test port via the cable to get the IP address, including the login credentials.
Hyper terminal To get the IP for node b by hyper terminal. Connect (DB 9---RJ45) cable to node b ( test port, cbu card ) DB9 RJ45 2 2 3 3 5 5 Open H/Terminal, get $ symbol and push enter, p/word=rbs, username=rbs