Professional Documents
Culture Documents
LM7805CT PDF
LM7805CT PDF
www.Jameco.com ✦ 1-800-831-4242
The content and copyrights of the attached
material are the property of its owner.
LM78XX/LM78XXA
3-Terminal 1A Positive Voltage Regulator
Features General Description
■ Output Current up to 1A The LM78XX series of three terminal positive regulators
■ Output Voltages of 5, 6, 8, 9, 10, 12, 15, 18, 24 are available in the TO-220 package and with several
■ Thermal Overload Protection
fixed output voltages, making them useful in a wide
range of applications. Each type employs internal current
■ Short Circuit Protection
limiting, thermal shut down and safe operating area pro-
■ Output Transistor Safe Operating Area Protection tection, making it essentially indestructible. If adequate
heat sinking is provided, they can deliver over 1A output
current. Although designed primarily as fixed voltage
regulators, these devices can be used with external com-
ponents to obtain adjustable voltages and currents.
Ordering Information
Current SOA
Generator Protection
Thermal
Protection
GND
2
Figure 1.
Pin Assignment
TO-220
GND
1. Input
1 2. GND
3. Output
Figure 2.
2 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7805)
Refer to the test circuits. -40°C < TJ < 125°C, IO = 500mA, VI = 10V, CI = 0.1µF, unless otherwise specified.
Notes:
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
2. These parameters, although guaranteed, are not 100% tested in production.
3 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7806) (Continued)
Refer to the test circuits. -40°C < TJ < 125°C, IO = 500mA, VI = 11V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
4 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7808) (Continued)
Refer to the test circuits. -40°C < TJ < 125°C, IO = 500mA, VI = 14V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
5 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7809) (Continued)
Refer to the test circuits. -40°C < TJ < 125°C, IO = 500mA, VI = 15V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
6 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7810) (Continued)
Refer to the test circuits. -40°C < TJ < 125°C, IO = 500mA, VI = 16V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
Notes:
9. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
10. These parameters, although guaranteed, are not 100% tested in production.
7 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7812) (Continued)
Refer to the test circuits. -40°C < TJ < 125°C, IO = 500mA, VI = 19V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
8 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7815) (Continued)
Refer to the test circuits. -40°C < TJ < 125°C, IO = 500mA, VI = 23V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
9 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7818) (Continued)
Refer to the test circuits. -40°C < TJ < 125°C, IO = 500mA, VI = 27V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
10 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7824) (Continued)
Refer to the test circuits. -40°C < TJ < 125°C, IO = 500mA, VI = 33V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
11 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7805A) (Continued)
Refer to the test circuits. 0°C < TJ < 125°C, IO = 1A, VI = 10V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
Notes:
19. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
20. These parameters, although guaranteed, are not 100% tested in production.
12 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7806A) (Continued)
Refer to the test circuits. 0°C < TJ < 125°C, IO = 1A, VI = 11V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
Notes:
21. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
22. These parameters, although guaranteed, are not 100% tested in production.
13 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7808A) (Continued)
Refer to the test circuits. 0°C < TJ < 125°C, IO = 1A, VI = 14V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
Notes:
23. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
24. These parameters, although guaranteed, are not 100% tested in production.
14 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7809A) (Continued)
Refer to the test circuits. 0°C < TJ < 125°C, IO = 1A, VI = 15V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
Notes:
25. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
26. These parameters, although guaranteed, are not 100% tested in production.
15 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7810A) (Continued)
Refer to the test circuits. 0°C < TJ < 125°C, IO = 1A, VI = 16V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
Notes:
27. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
28. These parameters, although guaranteed, are not 100% tested in production.
16 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7812A) (Continued)
Refer to the test circuits. 0°C < TJ < 125°C, IO = 1A, VI = 19V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
Note:
29. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
30. These parameters, although guaranteed, are not 100% tested in production.
17 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7815A) (Continued)
Refer to the test circuits. 0°C < TJ < 125°C, IO = 1A, VI = 23V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
Notes:
31. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
32. These parameters, although guaranteed, are not 100% tested in production.
18 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7818A) (Continued)
Refer to the test circuits. 0°C < TJ < 125°C, IO = 1A, VI = 27V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
Notes:
33. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
34. These parameters, although guaranteed, are not 100% tested in production.
19 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Electrical Characteristics (LM7824A) (Continued)
Refer to the test circuits. 0°C < TJ < 125°C, IO = 1A, VI = 33V, CI = 0.33µF, CO = 0.1µF, unless otherwise specified.
Notes:
35. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
36. These parameters, although guaranteed, are not 100% tested in production.
20 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Typical Performance Characteristics
6 3
VI = 10V TJ = 25°C
VO = 5V ∆VO = 100mV
IO = 5mA
5.75 2.5
QUIESCENT CURRENT (mA)
5.25 1.5
5 1
4.75 .5
4.5 0
-50 -25 0 25 50 75 100 125 0 5 10 15 20 25 30 35
JUNCTION TEMPERATURE (°C) INPUT-OUTPUT DIFFERENTIAL (V)
1.02 7
VI – VO = 5V TJ = 25°C
NORMALIZED OUTPUT VOLTAGE (V)
IO = 5mA VO = 5V
IO = 10mA
6.5
QUIESCENT CURRENT (mA)
1.01
6
1 5.5
5
0.99
4.5
0.98 4
-50 -25 0 25 50 75 100 125 5 10 15 20 25 30 35
JUNCTION TEMPERATURE (°C) INPUT VOLTAGE (V)
21 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Typical Applications
1 3
LM78XX
Input Output
CI 2 CO 0.1µF
0.33µF
Figure 7. DC Parameters
1 3
LM78XX
Input Output
2 RL 270pF
VO
2N6121 0V
0.33µF VO
or EQ 30µS
100Ω
5.1Ω 1 3
LM78XX
Input Output
2 RL
0.33µF
470µF
120Hz +
22 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
1 3
LM78XX
Input Output
CI 2 CO 0.1µF
0.33µF
1 3
LM78XX Output
Input
CI 2 CO 0.1µF V XX
0.33µF R1
IQ
IO
RL
V XX
IO = +
R1 IQ
Notes:
1. To specify an output voltage, substitute voltage value for “XX.” A common ground is required between the input and the
output voltage. The input voltage must remain typically 2.0V above the output voltage even during the low point on the input
ripple voltage.
2. CI is required if regulator is located an appreciable distance from power supply filter.
3. CO improves stability and transient response.
Figure 11.
1 3 Output
LM78XX
Input
2 CO V XX
CI 0.1µF R1
0.33µF
IQ
R2
IRI ≥ 5 IQ
VO = VXX(1 + R2 / R1) + IQR2
23 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Input 1 Output
3
LM7805
2
CI 0.33µF - 2 CO
6
LM741 0.1µF
+ 3 10kΩ
4
IRI ≥ 5 IQ
VO = VXX(1 + R2 / R1) + IQR2
Input Q1 BD536
IQ1
R1 1 3 Output
LM78XX
3Ω IO
IREG
2
V BEQ1
R1 = 0.33µF 0.1µF
IREG–IQ1 BQ1
Input RSC Q1
Q2
R1 Output
1 3
LM78XX
3Ω
2
0.33µF 0.1µF
Q1 = TIP42
Q2 = TIP42
V BEQ2
RSC =
I SC
24 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
1 3
LM78XX
VI VO
2
0.33µF 0.1µF 4.7kΩ
7 COMMON
_ 2
COMMON
6
LM741
+ 3 4.7kΩ
4
1 3
LM7815
+20V +15V
2
0.33µF 0.1µF
1N4001
+ 2.2µF
1µF +
1
1N4001
2 3
MC7915
-20V -15V
25 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Output
Input
+
0.1µF
2
1 3
LM78XX
D45H11 1mH
Input Output
470Ω
4.7Ω
Z1 3
1
LM78XX
+ 2
0.33µF
10µF
0.5Ω +
2000µF
26 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
Mechanical Dimensions
Dimensions in millimeters
TO-220
9.90 ±0.20 4.50 ±0.20
1.30 ±0.10
(8.70)
2.80 ±0.10
(1.70)
+0.10
ø3.60 ±0.10 1.30 –0.05
18.95MAX.
(3.70)
15.90 ±0.20
9.20 ±0.20
(1.46)
(3.00)
(45°
)
(1.00)
13.08 ±0.20
10.08 ±0.30
10.00 ±0.20
27 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1
LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx™ FAST® ISOPLANAR™ PowerEdge™ SuperFET™
ActiveArray™ FASTr™ LittleFET™ PowerSaver™ SuperSOT™-3
Bottomless™ FPS™ MICROCOUPLER™ PowerTrench® SuperSOT™-6
Build it Now™ FRFET™ MicroFET™ QFET® SuperSOT™-8
CoolFET™ GlobalOptoisolator™ MicroPak™ QS™ SyncFET™
CROSSVOLT™ GTO™ MICROWIRE™ QT Optoelectronics™ TCM™
DOME™ HiSeC™ MSX™ Quiet Series™ TinyLogic®
EcoSPARK™ I2C™ MSXPro™ RapidConfigure™ TINYOPTO™
E2CMOS™ i-Lo™ OCX™ RapidConnect™ TruTranslation™
EnSigna™ ImpliedDisconnect™ OCXPro™ µSerDes™ UHC™
FACT™ IntelliMAX™ OPTOLOGIC® ScalarPump™ UniFET™
FACT Quiet Series™ OPTOPLANAR™ SILENT SWITCHER® UltraFET®
Across the board. Around the world.™ PACMAN™ SMART START™ VCX™
The Power Franchise® POP™ SPM™ Wire™
Programmable Active Droop™ Power247™ Stealth™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDíS WORLDWIDE TERMS AND CONDITIONS,
SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
As used herein:
1. Life support devices or systems are devices or systems 2. A critical component is any component of a life support
which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be
or (b) support or sustain life, or (c) whose failure to perform reasonably expected to cause the failure of the life support
when properly used in accordance with instructions for use device or system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
28 www.fairchildsemi.com
LM78XX/LM78XXA Rev. 1.0.1