Professional Documents
Culture Documents
MC7800AE, NCV7800
Voltage Regulators -
Positive
1.0 A
http://onsemi.com
These voltage regulators are monolithic integrated circuits designed
as fixed−voltage regulators for a wide variety of applications
including local, on−card regulation. These regulators employ internal TO−220
current limiting, thermal shutdown, and safe−area compensation. With T SUFFIX
adequate heatsinking they can deliver output currents in excess of CASE 221AB
1.0 A. Although designed primarily as a fixed voltage regulator, these Heatsink surface
devices can be used with external components to obtain adjustable 1 connected to Pin 2.
2
voltages and currents. 3
Vin
MC7800 R24
50 D2
Zener
LAT LAT 3 A
Q17 Q18 R19
27.5 k
Q19
QNPN Q20
QNPN
C3 1.0 P
R14
1.0 k
Q10
QNPN
R15
R18 R21 680 R23
100 k R22 600 0.2
100
Vout
Q7 5.01
QNPN Q5
QNPN 2 R30
R17 Q12 18 k
9.0 k Q9 QNPN Sense
QNPN 2 R12 R29
Q6 R11 3.0 k 9.0 k
D1 15 k Q15
Zener QNPN
QNPN R25 R28
R1
10.66 k 6.0 k 9.0 k
R16 R10
R20 3340-(3316ACT)
600 R26 R27
17500
Q8
3.0 k 9.0 k
QNPN
R2
1.56 k
R9
R5 3.0 k R13
4.5 k SUB 11660
Q14 Q11 2
QNPN Q1 C1
C2 N+ 30 P
3.0 P QNPN 6
Q4
QNPN
Q13 Q3
QNPN QNPN
Q2 Q16
R6 QNPN 4
1.0 k Diode
R7 R3 R8
14 k 1.8 k 5.0 k
http://onsemi.com
2
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 10 V, IO = 500 mA, TJ = Tlow to 125°C (Note 1), unless otherwise noted)
MC7805B, NCV7805B MC7805C
Characteristic Symbol Min Typ Max Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 4.8 5.0 5.2 4.8 5.0 5.2 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
7.0 Vdc ≤ Vin ≤ 20 Vdc − − − 4.75 5.0 5.25
8.0 Vdc ≤ Vin ≤ 20 Vdc 4.75 5.0 5.25 − − −
Line Regulation (Note 4) Regline mV
7.5 Vdc ≤ Vin ≤ 20 Vdc, 1.0 A − 5.0 100 − 0.5 20
8.0 Vdc ≤ Vin ≤ 12 Vdc − 1.3 50 − 0.8 10
Load Regulation (Note 4) Regload mV
5.0 mA ≤ IO ≤ 1.0 A − 1.3 100 − 1.3 25
5.0 mA ≤ IO ≤ 1.5 A (TA = 25°C) − 0.15 50 − 1.3 25
Quiescent Current IB − 3.2 8.0 − 3.2 6.5 mA
Quiescent Current Change DIB mA
7.0 Vdc ≤ Vin ≤ 25 Vdc − − − − 0.3 1.0
5.0 mA ≤ IO ≤ 1.0 A (TA = 25°C) − − 0.5 − 0.08 0.8
Ripple Rejection RR dB
8.0 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz − 68 − 62 83 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 − − 10 −
Output Resistance f = 1.0 kHz rO − 0.9 − − 0.9 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 − − 0.6 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −0.3 − − −0.3 − mV/°C
1. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
2. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
3
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 10 V, IO = 1.0 A, TJ = Tlow to 125°C (Note 3), unless otherwise noted)
MC7805AB/MC7805AC/NCV7805AB
Characteristic Symbol Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 4.9 5.0 5.1 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
7.5 Vdc ≤ Vin ≤ 20 Vdc 4.8 5.0 5.2
Line Regulation (Note 4) Regline mV
7.5 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA − 0.5 10
8.0 Vdc ≤ Vin ≤ 12 Vdc, IO = 1.0 A − 0.8 12
8.0 Vdc ≤ Vin ≤ 12 Vdc, IO = 1.0 A, TJ = 25°C − 1.3 4.0
7.3 Vdc ≤ Vin ≤ 20 Vdc, IO = 1.0 A, TJ = 25°C − 4.5 10
Load Regulation (Note 4) Regload mV
5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − 1.3 25
5.0 mA ≤ IO ≤ 1.0 A − 0.8 25
250 mA ≤ IO ≤ 750 mA − 0.53 15
Quiescent Current IB − 3.2 6.0 mA
Quiescent Current Change DIB mA
8.0 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA − 0.3 0.8
7.5 Vdc ≤ Vin ≤ 20 Vdc, TJ = 25°C − − 0.8
5.0 mA ≤ IO ≤ 1.0 A − 0.08 0.5
Ripple Rejection RR dB
8.0 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz, IO = 500 mA 68 83 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 −
Output Resistance (f = 1.0 kHz) rO − 0.9 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −0.3 − mV/°C
3. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
4. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
4
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 11 V, IO = 500 mA, TJ = Tlow to 125°C (Note 5), unless otherwise noted)
MC7806B/NCV7806B MC7806C
Characteristic Symbol Min Typ Max Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 5.75 6.0 6.25 5.75 6.0 6.25 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
8.0 Vdc ≤ Vin ≤ 21 Vdc − − − 5.7 6.0 6.3
9.0 Vdc ≤ Vin ≤ 21 Vdc 5.7 6.0 6.3 − − −
Line Regulation, TJ = 25°C (Note 6) Regline mV
8.0 Vdc ≤ Vin ≤ 25 Vdc − 5.5 120 − 0.5 24
9.0 Vdc ≤ Vin ≤ 13 Vdc − 1.4 60 − 0.8 12
Load Regulation, TJ = 25°C (Note 6) Regload mV
5.0 mA ≤ IO ≤ 1.5 A − 1.3 120 − 1.3 30
Quiescent Current (TJ = 25°C) IB − 3.3 8.0 − 3.3 8.0 mA
Quiescent Current Change DIB mA
8.0 Vdc ≤ Vin ≤ 25 Vdc − − − − 0.3 1.3
5.0 mA ≤ IO ≤ 1.0 A − − 0.5 − 0.08 0.5
Ripple Rejection RR dB
9.0 Vdc ≤ Vin ≤ 19 Vdc, f = 120 Hz − 65 − 58 65 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 − − 10 −
Output Resistance f = 1.0 kHz rO − 0.9 − − 0.9 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 − − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −0.3 − − −0.3 − mV/°C
5. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
6. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
5
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 11 V, IO = 1.0 A, TJ = Tlow to 125°C (Note 7), unless otherwise noted)
MC7806AC
Characteristic Symbol Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 5.88 6.0 6.12 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
8.6 Vdc ≤ Vin ≤ 21 Vdc 5.76 6.0 6.24
Line Regulation (Note 8) Regline mV
8.6 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA − 5.0 12
9.0 Vdc ≤ Vin ≤ 13 Vdc, IO = 1.0 A − 1.4 15
Load Regulation (Note 8) Regload mV
5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − 1.3 25
5.0 mA ≤ IO ≤ 1.0 A − 0.9 25
250 mA ≤ IO ≤ 750 mA − 0.2 15
Quiescent Current IB − 3.3 6.0 mA
Quiescent Current Change DIB mA
9.0 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA − − 0.8
9.0 Vdc ≤ Vin ≤ 21 Vdc, IO = 1.0 A, TJ = 25°C − − 0.8
5.0 mA ≤ IO ≤ 1.0 A − − 0.5
Ripple Rejection RR dB
9.0 Vdc ≤ Vin ≤ 19 Vdc, f = 120 Hz, IO = 500 mA 58 65 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 −
Output Resistance (f = 1.0 kHz) rO − 0.9 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −0.3 − mV/°C
7. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
8. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
6
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 14 V, IO = 500 mA, TJ = Tlow to 125°C (Note 9), unless otherwise noted)
MC7808B/NCV7808B MC7808C
Characteristic Symbol Min Typ Max Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 7.7 8.0 8.3 7.7 8.0 8.3 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
10.5 Vdc ≤ Vin ≤ 23 Vdc − − − 7.6 8.0 8.4
11.5 Vdc ≤ Vin ≤ 23 Vdc 7.6 8.0 8.4 − − −
Line Regulation, TJ = 25°C, (Note 10) Regline mV
10.5 Vdc ≤ Vin ≤ 25 Vdc − 6.0 160 − 6.0 32
11 Vdc ≤ Vin ≤ 17 Vdc − 1.7 80 − 1.7 16
Load Regulation, TJ = 25°C (Note 10) Regload mV
5.0 mA ≤ IO ≤ 1.5 A − 1.4 160 − 1.4 35
Quiescent Current IB − 3.3 8.0 − 3.3 8.0 mA
Quiescent Current Change DIB mA
10.5 Vdc ≤ Vin ≤ 25 Vdc − − − − − 1.0
5.0 mA ≤ IO ≤ 1.0 A − − 0.5 − − 0.5
Ripple Rejection RR dB
11.5 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz − 62 − 56 62 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 − − 10 −
Output Resistance f = 1.0 kHz rO − 0.9 − − 0.9 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 − − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −0.4 − − −0.4 − mV/°C
9. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
10. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
7
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 14 V, IO = 1.0 A, TJ = Tlow to 125°C (Note 11), unless otherwise noted)
MC7808AB/MC7808AC/NCV7808AB
http://onsemi.com
8
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 15 V, IO = 500 mA, TJ = Tlow to 125°C (Note 13), unless otherwise noted)
MC7809B/NCV7809B MC7809C
Characteristic Symbol Min Typ Max Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 8.65 9.0 9.35 8.65 9.0 9.35 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
11.5 Vdc ≤ Vin ≤ 24 Vdc 8.55 9.0 9.45 8.55 9.0 9.45
Line Regulation, TJ = 25°C (Note 14) Regline mV
11 Vdc ≤ Vin ≤ 26 Vdc − 6.2 32 − 6.2 32
11.5 Vdc ≤ Vin ≤ 17 Vdc − 1.8 16 − 1.8 16
Load Regulation, TJ = 25°C (Note 14) Regload mV
5.0 mA ≤ IO ≤ 1.5 A − 1.5 35 − 1.5 35
Quiescent Current IB − 3.4 8.0 − 3.4 8.0 mA
Quiescent Current Change DIB mA
11.5 Vdc ≤ Vin ≤ 26 Vdc − − 1.0 − − 1.0
5.0 mA ≤ IO ≤ 1.0 A − − 0.5 − − 0.5
Ripple Rejection RR dB
11.5 Vdc ≤ Vin ≤ 21.5 Vdc, f = 120 Hz 56 61 − 56 61 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 − − 10 −
Output Resistance f = 1.0 kHz rO − 1.0 − − 1.0 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 − − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −0.5 − − −0.5 − mV/°C
13. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
14. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
9
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 15 V, IO = 1.0 A, TJ = Tlow to 125°C (Note 15), unless otherwise noted)
MC7809AB/MC7809AC
Characteristic Symbol Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 8.82 9.0 9.18 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
11.5 Vdc ≤ Vin ≤ 24 Vdc 8.65 9.0 9.35
Line Regulation (Note 16) Regline mV
11.5 Vdc ≤ Vin ≤ 26 Vdc, IO = 500 mA − 6.2 16
12 Vdc ≤ Vin ≤ 17 Vdc, IO = 1.0 A − 1.8 7.0
11.5 Vdc ≤ Vin ≤ 24 Vdc, TJ = 25°C − 5.2 16
Load Regulation (Note 16) Regload mV
5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − − 25
5.0 mA ≤ IO ≤ 1.0 A − − 25
250 mA ≤ IO ≤ 750 mA − − 15
Quiescent Current IB − 3.3 6.0 mA
Quiescent Current Change DIB mA
11.5 Vdc ≤ Vin ≤ 26 Vdc, IO = 500 mA − − 0.8
11.5 Vdc ≤ Vin ≤ 24 Vdc, IO = 1.0 A, TJ = 25°C − − 0.8
5.0 mA ≤ IO ≤ 1.0 A − − 0.5
Ripple Rejection RR dB
11.5 Vdc ≤ Vin ≤ 21.5 Vdc, f = 120 Hz, IO = 500 mA 56 61 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI _ VO 2.0 Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 −
http://onsemi.com
10
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 19 V, IO = 500 mA, TJ = Tlow to 125°C (Note 17), unless otherwise noted)
MC7812B/NCV7812B MC7812C
Characteristic Symbol Min Typ Max Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 11.5 12 12.5 11.5 12 12.5 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
14.5 Vdc ≤ Vin ≤ 27 Vdc − − − 11.4 12 12.6
15.5 Vdc ≤ Vin ≤ 27 Vdc 11.4 12 12.6 − − −
Line Regulation, TJ = 25°C (Note 18) Regline mV
14.5 Vdc ≤ Vin ≤ 30 Vdc − 7.5 240 − 3.8 24
16 Vdc ≤ Vin ≤ 22 Vdc − 2.2 120 − 0.3 24
14.8 Vdc ≤ Vin ≤ 27 Vdc, IO = 1.0 A − − − − − 48
Load Regulation, TJ = 25°C (Note 18) Regload mV
5.0 mA ≤ IO ≤ 1.5 A − 1.6 240 − 8.1 60
Quiescent Current IB − 3.4 8.0 − 3.4 6.5 mA
Quiescent Current Change DIB mA
14.5 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A, TJ = 25°C − − − − − 0.7
15 Vdc ≤ Vin ≤ 30 Vdc − − 1.0 − − 0.8
5.0 mA ≤ IO ≤ 1.0 A − − 0.5 − − 0.5
Ripple Rejection RR dB
15 Vdc ≤ Vin ≤ 25 Vdc, f = 120 Hz − 60 − 55 60 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 − − 10 −
Output Resistance f = 1.0 kHz rO − 1.1 − − 1.1 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 − − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −0.8 − − −0.8 − mV/°C
17. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
18. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
11
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 19 V, IO = 1.0 A, TJ = Tlow to 125°C (Note 19), unless otherwise noted)
MC7812AB/MC7812AC/NCV7812AB
Characteristic Symbol Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 11.75 12 12.25 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
14.8 Vdc ≤ Vin ≤ 27 Vdc 11.5 12 12.5
Line Regulation (Note 20) Regline mV
14.8 Vdc ≤ Vin ≤ 30 Vdc, IO = 500 mA − 3.8 18
16 Vdc ≤ Vin ≤ 22 Vdc, IO = 1.0 A − 2.2 20
14.5 Vdc ≤ Vin ≤ 27 Vdc, TJ = 25°C − 6.0 120
Load Regulation (Note 20) Regload mV
5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − − 25
5.0 mA ≤ IO ≤ 1.0 A − − 25
Quiescent Current IB − 3.4 6.0 mA
Quiescent Current Change DIB mA
15 Vdc ≤ Vin ≤ 30 Vdc, IO = 500 mA − − 0.8
14.8 Vdc ≤ Vin ≤ 27 Vdc, TJ = 25°C − − 0.8
5.0 mA ≤ IO ≤ 1.0 A, TJ = 25°C − − 0.5
Ripple Rejection RR dB
15 Vdc ≤ Vin ≤ 25 Vdc, f = 120 Hz, IO = 500 mA 55 60 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 −
Output Resistance (f = 1.0 kHz) rO − 1.1 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −0.8 − mV/°C
19. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
20. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
12
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 23 V, IO = 500 mA, TJ = Tlow to 125°C (Note 21), unless otherwise noted)
MC7815B/NCV7815B MC7815C
Characteristic Symbol Min Typ Max Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 14.4 15 15.6 14.4 15 15.6 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
17.5 Vdc ≤ Vin ≤ 30 Vdc − − − 14.25 15 15.75
18.5 Vdc ≤ Vin ≤ 30 Vdc 14.25 15 15.75 − − −
Line Regulation, TJ = 25°C (Note 22) Regline mV
17.9 Vdc ≤ Vin ≤ 30 Vdc − 8.5 300 − 8.5 30
20 Vdc ≤ Vin ≤ 26 Vdc − 3.0 150 − 3.0 28
Load Regulation, TJ = 25°C (Note 22) Regload mV
5.0 mA ≤ IO ≤ 1.5 A − 1.8 300 − 1.8 55
Quiescent Current IB − 3.5 8.0 − 3.5 6.5 mA
Quiescent Current Change DIB mA
17.5 Vdc ≤ Vin ≤ 30 Vdc − − − − − 0.8
17.5 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A, TJ = 25°C − − 1.0 − − 0.7
5.0 mA ≤ IO ≤ 1.0 A − − 0.5 − − 0.5
Ripple Rejection RR dB
18.5 Vdc ≤ Vin ≤ 28.5 Vdc, f = 120 Hz − 58 − 54 58 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 − − 10 −
Output Resistance f = 1.0 kHz rO − 1.2 − − 1.2 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 − − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −1.0 − − −1.0 − mV/°C
21. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
22. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
13
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 23 V, IO = 1.0 A, TJ = Tlow to 125°C (Note 23), unless otherwise noted)
MC7815AB/MC7815AC
Characteristic Symbol Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 14.7 15 15.3 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
17.9 Vdc ≤ Vin ≤ 30 Vdc 14.4 15 15.6
Line Regulation (Note 24) Regline mV
17.9 Vdc ≤ Vin ≤ 30 Vdc, IO = 500 mA − 8.5 20
20 Vdc ≤ Vin ≤ 26 Vdc − 3.0 22
17.5 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A, TJ = 25°C − 7.0 20
Load Regulation (Note 24) Regload mV
5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − 1.8 25
5.0 mA ≤ IO ≤ 1.0 A − 1.5 25
250 mA ≤ IO ≤ 750 mA − 1.2 15
Quiescent Current IB − 3.5 6.0 mA
Quiescent Current Change DIB mA
17.5 Vdc ≤ Vin ≤ 30 Vdc, IO = 500 mA − − 0.8
17.5 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A, TJ = 25°C − − 0.8
5.0 mA ≤ IO ≤ 1.0 A − − 0.5
Ripple Rejection RR dB
18.5 Vdc ≤ Vin ≤ 28.5 Vdc, f = 120 Hz, IO = 500 mA 60 80 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 −
Output Resistance f = 1.0 kHz rO − 1.2 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −1.0 − mV/°C
23. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
24. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
14
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 27 V, IO = 500 mA, TJ = Tlow to 125°C (Note 25), unless otherwise noted)
MC7818B MC7818C
Characteristic Symbol Min Typ Max Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 17.3 18 18.7 17.3 18 18.7 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
21 Vdc ≤ Vin ≤ 33 Vdc − − − 17.1 18 18.9
22 Vdc ≤ Vin ≤ 33 Vdc 17.1 18 18.9 − − −
Line Regulation, (Note 26) Regline mV
21 Vdc ≤ Vin ≤ 33 Vdc − 9.5 360 − 9.5 50
24 Vdc ≤ Vin ≤ 30 Vdc − 3.2 180 − 3.2 25
Load Regulation, (Note 26) Regload mV
5.0 mA ≤ IO ≤ 1.5 A − 2.0 360 − 2.0 55
Quiescent Current IB − 3.5 8.0 − 3.5 6.5 mA
Quiescent Current Change DIB mA
21 Vdc ≤ Vin ≤ 33 Vdc − − − − − 1.0
5.0 mA ≤ IO ≤ 1.0 A − − 0.5 − − 0.5
Ripple Rejection RR dB
22 Vdc ≤ Vin ≤ 33 Vdc, f = 120 Hz − 57 − 53 57 −
http://onsemi.com
15
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 27 V, IO = 1.0 A, TJ = Tlow to 125°C (Note 27), unless otherwise noted)
MC7818AC
Characteristic Symbol Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 17.64 18 18.36 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
21 Vdc ≤ Vin ≤ 33 Vdc 17.3 18 18.7
Line Regulation (Note 28) Regline mV
21 Vdc ≤ Vin ≤ 33 Vdc, IO = 500 mA − 9.5 22
24 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A − 3.2 25
24 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A, TJ = 25°C − 3.2 10.5
20.6 Vdc ≤ Vin ≤ 33 Vdc, IO = 1.0 A, TJ = 25°C − 8.0 22
Load Regulation (Note 28) Regload mV
5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − 2.0 25
5.0 mA ≤ IO ≤ 1.0 A − 1.8 25
250 mA ≤ IO ≤ 750 mA − 1.5 15
Quiescent Current IB − 3.5 6.0 mA
Quiescent Current Change DIB mA
21 Vdc ≤ Vin ≤ 33 Vdc, IO = 500 mA − − 0.8
21.5 Vdc ≤ Vin ≤ 30 Vdc, TJ = 25°C − − 0.8
5.0 mA ≤ IO ≤ 1.0 A − − 0.5
Ripple Rejection RR dB
22 Vdc ≤ Vin ≤ 32 Vdc, f = 120 Hz, IO = 500 mA 53 57 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 −
Output Resistance f = 1.0 kHz rO − 1.3 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −1.5 − mV/°C
27. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
28. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
16
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 33 V, IO = 500 mA, TJ = Tlow to 125°C (Note 29), unless otherwise noted)
MC7824B MC7824C
Characteristic Symbol Min Typ Max Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 23 24 25 23 24 25 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
27 Vdc ≤ Vin ≤ 38 Vdc − − − 22.8 24 25.2
28 Vdc ≤ Vin ≤ 38 Vdc 22.8 24 25.2 − − −
Line Regulation, (Note 30) Regline mV
27 Vdc ≤ Vin ≤ 38 Vdc − 11.5 480 − 2.7 60
30 Vdc ≤ Vin ≤ 36 Vdc − 3.8 240 − 2.7 48
Load Regulation, (Note 30) Regload mV
5.0 mA ≤ IO ≤ 1.5 A − 2.1 480 − 4.4 65
Quiescent Current IB − 3.6 8.0 − 3.6 6.5 mA
Quiescent Current Change DIB mA
27 Vdc ≤ Vin ≤ 38 Vdc − − − − − 1.0
5.0 mA ≤ IO ≤ 1.0 A − − 0.5 − − 0.5
Ripple Rejection RR dB
28 Vdc ≤ Vin ≤ 38 Vdc, f = 120 Hz − 54 − 50 54 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 − − 10 −
Output Resistance f = 1.0 kHz rO − 1.4 − − 1.4 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 − − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −2.0 − − −2.0 − mV/°C
29. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
30. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
17
MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 33 V, IO = 1.0 A, TJ = Tlow to 125°C (Note 31), unless otherwise noted)
MC7824AC
Characteristic Symbol Min Typ Max Unit
Output Voltage (TJ = 25°C) VO 23.5 24 24.5 Vdc
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc
27.3 Vdc ≤ Vin ≤ 38 Vdc 23.2 24 25.8
Line Regulation (Note 32) Regline mV
27 Vdc ≤ Vin ≤ 38 Vdc, IO = 500 mA − 11.5 25
30 Vdc ≤ Vin ≤ 36 Vdc, IO = 1.0 A − 3.8 28
30 Vdc ≤ Vin ≤ 36 Vdc, TJ = 25°C − 3.8 12
26.7 Vdc ≤ Vin ≤ 38 Vdc, IO = 1.0 A, TJ = 25°C − 10 25
Load Regulation (Note 32) Regload mV
5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − 2.1 15
5.0 mA ≤ IO ≤ 1.0 A − 2.0 25
250 mA ≤ IO ≤ 750 mA − 1.8 15
Quiescent Current IB − 3.6 6.0 mA
Quiescent Current Change DIB mA
27.3 Vdc ≤ Vin ≤ 38 Vdc, IO = 500 mA − − 0.8
27 Vdc ≤ Vin ≤ 38 Vdc, TJ = 25°C − − 0.8
5.0 mA ≤ IO ≤ 1.0 A − − 0.5
Ripple Rejection RR dB
28 Vdc ≤ Vin ≤ 38 Vdc, f = 120 Hz, IO = 500 mA 45 54 −
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc
Output Noise Voltage (TA = 25°C) Vn mV/VO
10 Hz ≤ f ≤ 100 kHz − 10 −
Output Resistance (f = 1.0 kHz) rO − 1.4 − mW
Short Circuit Current Limit (TA = 25°C) ISC A
Vin = 35 Vdc − 0.2 −
Peak Output Current (TJ = 25°C) Imax − 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO − −2.0 − mV/°C
31. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
32. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
18
MC7800, MC7800A, MC7800AE, NCV7800
3.0 80
TJ = -40°C
2.5
TJ = 0°C
70
2.0 TJ = 25°C f = 120 Hz
PART # Vin IO = 20 mA
MC7805C= 10 V DVin = 1.0 V(RMS)
1.5 60 MC7806C= 11 V
TJ = 85°C MC7808C= 14 V
1.0 MC7812C= 19 V
50 MC7815C= 23 V
TJ = 125°C MC7818C= 27 V
0.5 MC7824C= 33 V
0 40
4.0 6.0 8.0 10 12 15 20 25 30 35 40 4.0 6.0 8.0 10 12 14 16 18 20 22 24
Vin−Vout, INPUT/OUTPUT VOLTAGE DIFFERENTIAL (V) VO, OUTPUT VOLTAGE (V)
80
RR, RIPPLE REJECTION (dB)
Vin = 20 V
40
30 4.8
0.01 0.1 1.0 10 -60 -20 20 60 100 140 180
f, FREQUENCY (kHz) TJ, JUNCTION TEMPERATURE (°C)
8.20
Vin = 14 V
8.15
IO = 1.0 mA
VO, OUTPUT VOLTAGE (V)
8.10
8.05
8.00
7.95
7.90
7.85
7.80
-40 -20 0 20 40 60 80 100 120 140 160 180
TJ, JUNCTION TEMPERATURE (5C)
Figure 6. Output Voltage as a Function of
Junction Temperature (MC7808AE)
http://onsemi.com
19
MC7800, MC7800A, MC7800AE, NCV7800
10 6.0
Vin = 10 V
Z O , OUTPUT IMPEDANCE (m)
0.1 0
4.0 8.0 12 16 20 24 -75 -50 -25 0 25 50 75 100 125
VO, OUTPUT VOLTAGE (V) TJ, JUNCTION TEMPERATURE (°C)
http://onsemi.com
20
MC7800, MC7800A, MC7800AE, NCV7800
APPLICATIONS INFORMATION
Input MC7805
Output
0.33 mF R MC7805
Constant Input
Current to
Grounded
IO Load 7 2
0.33 mF 6 0.1 mF
The MC7800 regulators can also be used as a current source when 3
10 k
connected as above. In order to minimize dissipation the MC7805C is 1.0 k 4
chosen in this application. Resistor R determines the current as follows: MC1741G
5.0V
I + )I
O R B
VO = 7.0 V to 20 V
VIN = VO ≥ 2.0 V
IB ^ 3.2 mA over line and load changes.
The addition of an operational amplifier allows adjustment to higher or
For example, a 1.0 A current source would require R to be a 5.0 W, intermediate values while retaining regulation characteristics. The
10 W resistor and the output voltage compliance would be the input minimum voltage obtainable with this arrangement is 2.0 V greater than the
voltage less 7.0 V. regulator voltage.
MJ2955
RSource MJ2955 or Equiv. RSource RSC or Equiv.
Input Input
0.33 mF 0.33 mF
R
MC78XX Output 2N6049
or Equiv.
R
MC78XX
≥ 10 mF 1.0 mF 1.0 mF Output
≥ 10 mF 1.0 mF
XX = 2 digits of type number indicating voltage. XX = 2 digits of type number indicating voltage.
The MC7800 series can be current boosted with a PNP transistor. The The circuit of Figure 11 can be modified to provide supply protection
MJ2955 provides current to 5.0 A. Resistor R in conjunction with the VBE against short circuits by adding a short circuit sense resistor, RSC, and an
of the PNP determines when the pass transistor begins conducting; this additional PNP transistor. The current sensing PNP must be able to handle
circuit is not short circuit proof. Input/output differential voltage minimum is the short circuit current of the three-terminal regulator. Therefore, a
increased by VBE of the pass transistor. four-ampere plastic power transistor is specified.
Figure 11. Current Boost Regulator Figure 12. Short Circuit Protection
http://onsemi.com
21
MC7800, MC7800A, MC7800AE, NCV7800
20 2.5
qJC = 5°C/W IO = 1.0 A
DIFFERENTIAL (V)
12 qHS = 5°C/W 1.5 IO = 20 mA
IO = 0 mA
8.0 qHS = 15°C/W 1.0
Figure 13. Worst Case Power Dissipation versus Figure 14. Input Output Differential as a Function
Ambient Temperature (Case 221A) of Junction Temperature (MC78XXC, AC, B)
80 3.5
Mounted
ÎÎÎÎ
Vertically 2.0 oz. Copper
60 2.5
L
50 Minimum
Size Pad LÎÎÎÎ
ÎÎÎÎ
2.0
40
RqJA ÎÎÎÎ 1.5
30 1.0
0 5.0 10 15 20 25 30
L, LENGTH OF COPPER (mm)
100 2.4
PD, MAXIMUM POWER DISSIPATION (W)
90 Mounted 2.0
JUNCTION-TO-AIR ( °C/W)
ÎÎÎÎ
Vertically
2.0 oz. Copper
80 L 1.6
Minimum
ÎÎÎÎ
ÎÎÎÎ
70 Size Pad 1.2
L
60
50
ÎÎÎÎ 0.8
0.4
RqJA
40 0
0 5.0 10 15 20 25 30
L, LENGTH OF COPPER (mm)
http://onsemi.com
22
MC7800, MC7800A, MC7800AE, NCV7800
DEFINITIONS
Line Regulation − The change in output voltage for a Quiescent Current − That part of the input current that is
change in the input voltage. The measurement is made under not delivered to the load.
conditions of low dissipation or by using pulse techniques Output Noise Voltage − The rms ac voltage at the output,
such that the average chip temperature is not significantly with constant load and no input ripple, measured over a
affected. specified frequency range.
Load Regulation − The change in output voltage for a Long Term Stability − Output voltage stability under
change in load current at constant chip temperature. accelerated life test conditions with the maximum rated
Maximum Power Dissipation − The maximum total voltage listed in the devices’ electrical characteristics and
device dissipation for which the regulator will operate maximum power dissipation.
within specifications.
ORDERING INFORMATION
Operating
Device Nominal Voltage Temperature Range Package Shipping†
MC7805ABD2TG 5.0 V TJ = −40°C to +125°C D2PAK 50 Units /Rail
(Pb−free)
http://onsemi.com
23
MC7800, MC7800A, MC7800AE, NCV7800
http://onsemi.com
24
MC7800, MC7800A, MC7800AE, NCV7800
http://onsemi.com
25
MC7800, MC7800A, MC7800AE, NCV7800
http://onsemi.com
26
MC7800, MC7800A, MC7800AE, NCV7800
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique Site
and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable.
http://onsemi.com
27
MC7800, MC7800A, MC7800AE, NCV7800
MARKING DIAGRAMS
MC MC MC *
78xxAEyT 78xxAyT 78xxyT *
AWLYWWG AWLYWWG AWLYWWG MC MC 78xxyG
78xxAyD2T 78xxyD2T ALYWW
AWLYWWG AWLYWWG
http://onsemi.com
28
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
SEATING
−T− PLANE
2. CONTROLLING DIMENSION: INCHES.
3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND
LEAD IRREGULARITIES ARE ALLOWED.
B F C 4. PRODUCT SHIPPED PRIOR TO 2008 HAD DIMENSIONS
T S S = 0.045 - 0.055 INCHES (1.143 - 1.397 MM)
SCALE 1:1
4 INCHES MILLIMETERS
DIM MIN MAX MIN MAX
A 0.570 0.620 14.48 15.75
Q A B 0.380 0.405 9.66 10.28
C 0.160 0.190 4.07 4.82
1 2 3 U D 0.025 0.035 0.64 0.88
H F 0.142 0.147 3.61 3.73
G 0.095 0.105 2.42 2.66
K H 0.110 0.155 2.80 3.93
Z J 0.018 0.025 0.46 0.64
K 0.500 0.562 12.70 14.27
L 0.045 0.060 1.15 1.52
N 0.190 0.210 4.83 5.33
L R Q 0.100 0.120 2.54 3.04
R 0.080 0.110 2.04 2.79
V J S 0.020 0.024 0.508 0.61
G T 0.235 0.255 5.97 6.47
U 0.000 0.050 0.00 1.27
D V 0.045 --- 1.15 ---
Z --- 0.080 --- 2.04
N
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
DOCUMENT NUMBER: 98AON23085D Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
L4 INCHES MILLIMETERS
NOTE 7
DIM MIN MAX MIN MAX
b2 c BOTTOM VIEW A 0.086 0.094 2.18 2.38
e SIDE VIEW A1 0.000 0.005 0.00 0.13
b b 0.025 0.035 0.63 0.89
0.005 (0.13) M C b2 0.028 0.045 0.72 1.14
TOP VIEW b3 0.180 0.215 4.57 5.46
c 0.018 0.024 0.46 0.61
c2 0.018 0.024 0.46 0.61
H Z Z D 0.235 0.245 5.97 6.22
E 0.250 0.265 6.35 6.73
e 0.090 BSC 2.29 BSC
GAUGE SEATING
L2 PLANE C PLANE
H 0.370 0.410 9.40 10.41
L 0.055 0.070 1.40 1.78
L1 0.114 REF 2.90 REF
L2 0.020 BSC 0.51 BSC
L BOTTOM VIEW L3 0.035 0.050 0.89 1.27
A1 L4 −−− 0.040 −−− 1.01
L1 ALTERNATE
Z 0.155 −−− 3.93 −−−
CONSTRUCTIONS
DETAIL A
ROTATED 905 CW GENERIC
MARKING DIAGRAM*
STYLE 1: STYLE 2: STYLE 3: STYLE 4: STYLE 5:
PIN 1. BASE PIN 1. GATE PIN 1. ANODE PIN 1. CATHODE PIN 1. GATE
2. COLLECTOR 2. DRAIN 2. CATHODE 2. ANODE 2. ANODE
3. EMITTER 3. SOURCE 3. ANODE 3. GATE 3. CATHODE
4. COLLECTOR 4. DRAIN 4. CATHODE 4. ANODE 4. ANODE XXXXXXG AYWW
ALYWW XXX
STYLE 6: STYLE 7: STYLE 8: STYLE 9: STYLE 10: XXXXXG
PIN 1. MT1 PIN 1. GATE PIN 1. N/C PIN 1. ANODE PIN 1. CATHODE
2. MT2 2. COLLECTOR 2. CATHODE 2. CATHODE 2. ANODE
3. GATE 3. EMITTER 3. ANODE 3. RESISTOR ADJUST 3. CATHODE
4. MT2 4. COLLECTOR 4. CATHODE 4. CATHODE 4. ANODE
IC Discrete
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
D2PAK
CASE 936−03
ISSUE E
DATE 29 SEP 2015
SCALE 1:1
NOTES:
T T 1. DIMENSIONING AND TOLERANCING PER ANSI
TERMINAL 4 Y14.5M, 1982.
C C
K A U
2. CONTROLLING DIMENSION: INCHES.
OPTIONAL ED OPTIONAL ES 3. TAB CONTOUR OPTIONAL WITHIN DIMENSIONS
A AND K.
CHAMFER CHAMFER
4. DIMENSIONS U AND V ESTABLISH A MINIMUM
S MOUNTING SURFACE FOR TERMINAL 4.
V 5. DIMENSIONS A AND B DO NOT INCLUDE MOLD
B FLASH OR GATE PROTRUSIONS. MOLD FLASH
H DETAIL C DETAIL C AND GATE PROTRUSIONS NOT TO EXCEED
1 2 3 0.025 (0.635) MAXIMUM.
6. SINGLE GAUGE DESIGN WILL BE SHIPPED AF
TER FPCN EXPIRATION IN OCTOBER 2011.
J INCHES MILLIMETERS
F SIDE VIEW BOTTOM VIEW SIDE VIEW DIM MIN MAX MIN MAX
DUAL GAUGE SINGLE GAUGE A 0.386 0.403 9.804 10.236
G CONSTRUCTION CONSTRUCTION B 0.356 0.368 9.042 9.347
2X D C 0.170 0.180 4.318 4.572
XXXXXXG
8.380 ALYWW
16.155
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
DOCUMENT NUMBER: 98ASH01005A Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
◊ www.onsemi.com
1