Professional Documents
Culture Documents
CBC Tech Data - Digital Version PDF
CBC Tech Data - Digital Version PDF
Technical Data
����������
���
� �
�
�
��
�
� �
� �
�
�������
��������
�������� FASTENERS
I
S
O
9
0
0
1
���������������������������������
Mission Statement
Disclaimer
Although CBC Fasteners has striven to ensure that all the information
contained in this publication is accurate, reliance of the contents thereof, for
any purpose whatsoever, is at the sole risk of that person or party.
CBC is not responsible for any harm or damages caused to persons or
property arising from use of any of the information contained herein.
INDEX
PROPERTY CLASS
MECHANICAL PROPERTY 4.8 8.8 10.9
d� 16mm d > 16mm
nom 400 800 800 1000
Tensile Strength (N/mm²)
min 420 800 830 1040
HRB 71,0 - - -
min
HRC - 22 23 32
Rockwell Hardness, HR
HRB 99,5 - - -
max
HRC - 32 34 39
nom 320 - - -
Lower Yield Stress(ReL N/mm²)
min 340 - - -
nom - 640 640 900
Proof Stress (Rp0,2 N/mm²)
min - 640 640 940
Elongation after Fracture, A min 14 12 12 9
MECHANIC AL PROPERTIES
Back to Index I
S
O
CBC Fasteners wishes to thank the Hot Dip Galvanizer’s Association for permission to print their technical brief
on Hot Dip Galvanizing for bolts and nuts. We trust that their work will be of benefit to industry.
Corrosion protection of carbon steel fasteners is generally achieved through the application of a coating
(barrier protection), be it in the form of a paint system or through the use of a metallic coating. Metallic
coatings comprise of different materials, zinc is usually chosen for reason of economics, ease of application
as well as the mechanism of cathodic protection provided by zinc.
Zinc is applied either by an electroplating process (electro-galvanizing) or by immersion in molten zinc (hot
dip galvanizing). Corrosion protection provided by zinc is generally proportional to the coating thickness,
i.e. the thicker the coating the longer the service life.
Zinc coating thicknesses achieved using the electroplating process, generally range between 6µm to 10µm
(µm = micrometers), while hot dip galvanized coating thicknesses range from 45µm through to about 65µm.
It is therefore imperative to specify the specific type of zinc coating required for corrosion protection. The
word “galvanized” alone is insufficient and should be avoided. Corrosion protection specifications should
clearly state, “electroplated, or electro-galvanized” or “hot dip galvanized”.
The following specification is restricted to the requirements for Hot Dip Galvanized carbon steel fasteners,
comprising bolts, nuts and washers.
Table No. 1 - Coating thicknesses on samples that are centrifuged (Refer ISO 1461:2000)
Notes:
A. Local coating thickness obtained using a magnetic test or preferred single value from a gravimetric
test.
B. Mean coating thickness being the average value of the local thicknesses on all the articles in the control
sample.
C. Fasteners not commercially available in sizes <6mm diameter.
Back to Index
Table No.2 - Coating Requirements for Class 10.9 Hot Dip Galvanized Fasteners
Excessively thick hot dip galvanized coatings, i.e. zinc immersion times >2 minutes, results in excessive
growth of the hard Fe/Zn alloy layers, possible fatigue failure from crack propagation at stress raisers.
Excessively thick coatings, on threads, will interfere with thread tolerances.
Threads are to be clearly defined and free from excess solidified zinc, allowing for ease of nut fitting and
tensioning.
Back to Index
Further requirements for Tensioning Hot Dip Galvanized High Strength Bolts
and Nuts
Hot Dip Galvanized or plated bolts shall be tightened or torqued by the turn-of-the-nut or by direct-tension-
indicator methods.
a) The use of hot dip galvanized Class 10.9S bolts and nuts is permitted provided that a certificate of
compliance is issued by the plater that the fasteners have been processed in terms of the unpublished
SANS 10094 code of practice detailed above.
b) In the case of high-tensile bolts, the thread and washers on which tightening is done, shall be thoroughly
lubricated with molybdenum disulphide or beeswax, prior to tensioning.
NOTE: Users of fasteners shall be aware of dangers during tightening procedures if they are not applied
correctly.
���
���������
���������������
�� ��������������������������������
��
�� ��������������������������
���������������������������
��
�
�� ��� ���� ���� ���� ���� ���� ���� ����
Back to Index
Figure No. 2 - Degree of nut rotation to achieve the minimum tension of fasteners after snug tightening
Length of bolt, mm
M8 to M12 0.33
Reference Specifications
SANS 121 (ISO 1461) - Hot dip galvanized coatings on fabricated iron and steel articles.
SANS 10094 – The use of high-strength friction-grip bolts (unpublished as at July 2004).
Back to Index
� ������������������������������� �
�� ��
� �����������������
��� � � ������
�
��
�
� �
� � �������
��
����
� � � ���
��
����������
�������� �
�
S k
d
min max min nom max Dimensions for
M6 9.78 10.00 3.85 4.00 4.15 Bolt DIN 931
M8 12.73 13.00 5.15 5.30 5.45
Grade 8.8 and 10.9
M10 16.73 17.00 6.22 6.40 6.58
M12 18.67 19.00 7.32 7.50 7.68
Range M6 - M30
M14 21.67 22.00 8.62 8.80 8.98 Dimensions in millimetres
M16 23.67 24.00 9.82 10.00 10.18
M20 29.67 30.00 12.29 12.50 12.71 Specifications differences
between DIN 931 and
M24 35.38 36.00 14.79 15.00 15.21
ISO 4014
M30 45.00 46.00 18.44 18.70 18.96
DIMENSIONS
ds (shank) P a C e r lf U da dw k`
min max pitch min min max min min max max max min min
M6 5.82 6.00 1.00 2.0 0.15 0.50 11.05 0.25 1.4 1.5 6.8 8.88 2.70
M8 7.78 8.00 1.25 2.5 0.15 0.60 14.38 0.40 2.0 1.8 9.2 11.63 3.61
M10 9.78 10.00 1.50 3.5 0.15 0.60 18.90 0.40 2.0 2.2 11.2 15.63 4.35
M12 11.73 12.00 1.75 4.0 0.15 0.60 21.10 0.60 3.0 2.6 13.7 17.37 5.12
M14 13.73 14.00 2.00 4.5 0.15 0.60 24.49 0.60 3.0 3.0 15.7 20.37 6.03
M16 15.73 16.00 2.00 5.0 0.20 0.80 26.75 0.60 3.0 3.0 17.7 22.49 6.87
M20 19.67 20.00 2.50 7.0 0.20 0.80 33.53 0.80 4.0 3.5 22.4 28.19 8.60
M24 23.67 24.00 3.00 8.0 0.20 0.80 39.98 0.80 4.0 4.5 26.4 33.61 10.35
M30 29.67 30.00 3.50 8.0 0.20 0.80 50.85 1.00 6.0 5.2 33.4 42.75 12.80
Back to Index I
S
O
� ������������������������������� �
�� ��
� �����������������
��� � � ������
�
��
�
� �
� � �������
��
����
� � � ���
��
����������
�������� �
�
S k
Dimensions for d
min max min nom max
Bolt ISO 4014 M6 9.78 10.00 3.85 4.00 4.15
Grade 8.8 and 10.9 M8 12.73 13.00 5.15 5.30 5.45
Range M6 - M30 M10 15.73 16.00 6.22 6.40 6.58
M12 17.67 18.00 7.32 7.50 7.68
Dimensions in millimetres M14 20.67 21.00 8.62 8.80 8.98
M16 23.67 24.00 9.82 10.00 10.18
Specifications differences
between DIN 931 and M20 29.67 30.00 12.29 12.50 12.71
ISO 4014 M24 35.38 36.00 14.79 15.00 15.21
M30 45.00 46.00 18.44 18.70 18.96
DIMENSIONS
ds (shank) P a C e r lf U da dw k`
min max pitch min min max min min max max max min min
M6 5.82 6.00 1.00 2.0 0.15 0.50 11.05 0.25 1.4 1.5 6.8 8.88 2.70
M8 7.78 8.00 1.25 2.5 0.15 0.60 14.38 0.40 2.0 1.8 9.2 11.63 3.61
M10 9.78 10.00 1.50 3.5 0.15 0.60 17.77 0.40 2.0 2.2 11.2 14.63 4.35
M12 11.73 12.00 1.75 4.0 0.15 0.60 20.03 0.60 3.0 2.6 13.7 16.63 5.12
M14 13.73 14.00 2.00 4.5 0.15 0.60 23.36 0.60 3.0 3.0 15.7 19.37 6.03
M16 15.73 16.00 2.00 5.0 0.20 0.80 26.75 0.60 3.0 3.0 17.7 22.49 6.87
M20 19.67 20.00 2.50 7.0 0.20 0.80 33.53 0.80 4.0 3.5 22.4 28.19 8.60
M24 23.67 24.00 3.00 8.0 0.20 0.80 39.98 0.80 4.0 4.5 26.4 33.61 10.35
M30 29.67 30.00 3.50 8.0 0.20 0.80 50.85 1.00 6.0 5.2 33.4 42.75 12.80
Back to Index I
S
O
� ������������������������������� �
�� ��
� �����������������
��� � � ������
�
��
�
� �
� � ��������
��
�����
� � � ���
��
����������
�������� �
�
DIMENSIONS
ds P a C e r lf U da dw k`
min max lead max min max min min max max max min min
M12 11.73 12.00 1.75 3.5 0.4 0.8 22.78 1.2 3.0 2.6 14.70 19.2 4.9
M16 15.73 16.00 2.00 4.0 0.4 0.8 29.56 1.2 3.0 3.0 18.70 24.9 6.5
M20 19.67 20.00 2.50 5.0 0.4 0.8 37.29 1.5 4.0 3.5 23.24 31.4 8.1
M24 23.67 24.00 3.00 6.0 0.4 0.8 45.20 1.5 4.0 4.5 27.64 38.0 9.2
Back to Index I
S
O
� ������������������������������� �
�� ��
� �����������������
��� � � ������
�
��
�
� �
� � �������
��
����
� � � ���
��
����������
�������� �
�
S k
d
Dimensions for min max min nom max
Bolt DIN 960 M8 x 1.00 12.73 13.00 5.15 5.30 5.45
M10 x 1.00 16.73 17.00 6.22 6.40 6.58
Grade 8.8 and 10.9 M10 x 1.25 16.73 17.00 6.22 6.40 6.58
Range M8 - M24 M12 x 1.25 18.67 19.00 7.32 7.50 7.68
M12 x 1.50 18.67 19.00 7.32 7.50 7.68
Dimensions in millimetres
M14 x 1.50 21.67 22.00 8.62 8.80 8.98
M16 x 1.50 23.67 24.00 9.82 10.00 10.18
M20 x 1.50 29.67 30.00 12.29 12.50 12.72
DIMENSIONS
ds (shank) a C e r lf U da dw k`
min max min min max min min max max max min min
M8 x 1.00 7.78 8.00 2.5 0.15 0.60 14.38 0.4 2.0 1.8 9.2 11.63 3.61
M10 x 1.00 9.78 10.00 3.5 0.15 0.60 18.90 0.4 2.0 2.2 11.2 15.63 4.35
M10 x 1.25 9.78 10.00 3.5 0.15 0.60 18.90 0.4 2.0 2.2 11.2 15.63 4.35
M12 x 1.25 11.73 12.00 4.0 0.15 0.60 21.10 0.6 3.0 2.6 13.7 17.37 5.12
M12 x 1.50 11.73 12.00 4.0 0.15 0.60 21.10 0.6 3.0 2.6 13.7 17.37 5.12
M14 x 1.50 13.73 14.00 4.5 0.15 0.60 24.49 0.6 3.0 3.0 15.7 20.37 6.03
M16 x 1.50 15.73 16.00 5.0 0.20 0.80 26.75 0.6 3.0 3.0 17.7 22.49 6.87
M20 x 1.50 19.67 20.00 7.0 0.20 0.80 33.53 0.8 4.0 3.5 22.4 28.19 8.60
M24 x 2.00 23.67 24.00 8.0 0.20 0.80 39.98 0.8 4.0 4.5 26.4 33.61 10.35
Back to Index I
S
O
� �
��������������
��������� �
�����������������������������
��
�
��
�����������������
��� � � ������
�
��
�
� �
� �
�������
���
��
� � ����
�
��
����������
�������� � �
S k
d
min max min nom max Dimensions for
M8 x 1.00 12.73 13.00 5.15 5.30 5.45 Bolt ISO 8765
M10 x 1.00 15.73 16.00 6.22 6.40 6.58
M10 x 1.25 15.73 16.00 6.22 6.40 6.58
(4014 Fine Pitch)
M12 x 1.25 17.73 18.00 7.32 7.50 7.68 Grade 8.8 and 10.9
M12 x 1.50 17.73 18.00 7.32 7.50 7.68 Range M8 - M24
M14 x 1.50 20.67 21.00 8.62 8.80 8.98
M16 x 1.50 23.67 24.00 9.82 10.00 10.18 Dimensions in millimetres
M20 x 1.50 29.67 30.00 12.29 12.50 12.72
DIMENSIONS
M24 x 2.00 35.38 36.00 14.79 15.00 15.22
ds (shank) a C e r lf U da dw k`
min max min min max min min max max max min min
M8 x 1.00 7.78 8.00 2.5 0.15 0.60 14.38 0.4 2.0 1.8 9.2 11.63 3.61
M10 x 1.00 9.78 10.00 3.5 0.15 0.60 17.77 0.4 2.0 2.2 11.2 14.63 4.35
M10 x 1.25 9.78 10.00 3.5 0.15 0.60 17.77 0.4 2.0 2.2 11.2 14.63 4.35
M12 x 1.25 11.73 12.00 4.0 0.15 0.60 20.03 0.6 3.0 2.6 13.7 16.63 5.12
M12 x 1.50 11.73 12.00 4.0 0.15 0.60 20.03 0.6 3.0 2.6 13.7 16.63 5.12
M14 x 1.50 13.73 14.00 4.5 0.15 0.60 23.36 0.6 3.0 3.0 15.7 19.37 6.03
M16 x 1.50 15.73 16.00 5.0 0.20 0.80 26.75 0.6 3.0 3.0 17.7 22.49 6.87
M20 x 1.50 19.67 20.00 7.0 0.20 0.80 33.53 0.8 4.0 3.5 22.4 28.19 8.60
M24 x 2.00 23.67 24.00 8.0 0.20 0.80 39.98 0.8 4.0 4.5 26.4 33.61 10.35
Back to Index I
S
O
�
�������������������
����������� �
������������������������������� � ��
�
���
�
��
�
���
�
� �
� �
��
� � ���
��
� ����������
�������� � �
S k
d
Dimensions for min max min nom max
Bolt SABS 135 M6 9.78 10.00 3.85 4.00 4.15
ds P a C e r U da dw k`
min max lead max min max min min max max min min
M6 5.82 6.00 1.00 2.0 0.15 0.50 11.05 0.25 1.5 6.8 8.88 2.70
M8 7.78 8.00 1.25 2.5 0.15 0.60 14.38 0.40 1.8 9.2 11.63 3.61
M10 9.78 10.00 1.50 3.5 0.15 0.60 18.90 0.40 2.2 11.2 15.63 4.35
M12 11.73 12.00 1.75 4.0 0.15 0.60 21.10 0.60 2.6 13.7 17.37 5.12
M14 13.73 14.00 2.00 4.5 0.15 0.60 24.49 0.60 3.0 15.7 20.37 6.03
M16 15.73 16.00 2.00 5.0 0.20 0.80 26.75 0.60 3.0 17.7 22.49 6.87
M20 19.67 20.00 2.50 7.0 0.20 0.80 33.53 0.80 3.5 22.4 28.19 8.60
M24 23.67 24.00 3.00 8.0 0.20 0.80 39.98 0.80 4.5 26.4 33.61 10.35
M30 29.67 30.00 3.50 8.0 0.20 0.80 50.85 1.00 5.2 33.4 42.75 12.80
Back to Index I
S
O
�
������
��
� � ����
� ���
��
����������
�������� � �
�
S k
d Dimensions for
min max min nom max
M6 9.78 10.00 3.85 4.00 4.15
Screw (Set) DIN 933
M8 12.73 13.00 5.15 5.30 5.45 Grade 8.8 and 10.9
M10 16.73 17.00 6.22 6.40 6.58 Range M6 - M30
M12 17.67 19.00 7.32 7.50 7.68
M14 21.67 22.00 8.62 8.80 8.98 Dimensions in millimetres
M16 23.67 24.00 9.82 10.00 10.18
M20 29.67 30.00 12.29 12.50 12.71 Specifications differences
DIMENSIONS
M24 35.38 36.00 14.79 15.00 15.21 between DIN 933 and
ISO 4017
M30 45.00 46.00 18.44 18.70 18.96
P a C e r U da dw k`
lead min max min max min min max max min min
M6 1.00 1.00 2.00 0.15 0.50 11.05 0.25 1.5 6.8 8.88 2.70
M8 1.25 1.25 2.50 0.15 0.60 14.38 0.40 1.8 9.2 11.63 3.61
M10 1.50 1.50 3.50 0.15 0.60 18.90 0.40 2.2 11.2 15.63 4.35
M12 1.75 1.75 4.00 0.15 0.60 21.10 0.60 2.6 13.7 17.37 5.12
M14 2.00 2.00 4.50 0.15 0.60 24.49 0.60 3.0 15.7 20.37 6.03
M16 2.00 2.00 5.00 0.20 0.80 26.75 0.60 3.0 17.7 22.49 6.87
M20 2.50 2.50 7.00 0.20 0.80 33.53 0.80 3.5 22.4 28.19 8.60
M24 3.00 3.00 8.00 0.20 0.80 39.98 0.80 4.5 26.4 33.61 10.35
M30 3.50 3.50 10.00 0.20 0.80 50.85 1.00 5.2 33.4 42.75 12.80
l mm
12 14 16 18 20 22 25 28 30 35 40 45 50 55 60 65 70 75 80 85-120
toler ± 0.35 ± 0.42 ± 0.50 ± 0.60 ± 0.70
Back to Index I
S
O
�
������
��
� � ����
� ���
��
����������
�������� � �
�
S k
Dimensions for d
min max min nom max
Screw (Set) ISO 4017 M6 9.78 10.00 3.85 4.00 4.15
Grade 8.8 and 10.9 M8 12.73 13.00 5.15 5.30 5.45
M10 15.73 16.00 6.22 6.40 6.58
Range M6 - M30
M12 17.73 18.00 7.32 7.50 7.68
Dimensions in millimetres M14 20.67 21.00 8.62 8.80 8.98
M16 23.67 24.00 9.82 10.00 10.18
Specifications differences M20 29.67 30.00 12.29 12.50 12.71
DIMENSIONS
between ISO 4017 and M24 35.38 36.00 14.79 15.00 15.21
DIN 933
M30 45.00 46.00 18.44 18.70 18.96
P a C e r U da dw k`
lead min max min max min min max max min min
M6 1.00 1.00 2.00 0.15 0.50 11.05 0.25 1.5 6.8 8.88 2.70
M8 1.25 1.25 2.50 0.15 0.60 14.38 0.40 1.8 9.2 11.63 3.61
M10 1.50 1.50 3.50 0.15 0.60 17.77 0.40 2.2 11.2 14.63 4.35
M12 1.75 1.75 4.00 0.15 0.60 20.03 0.60 2.6 13.7 16.63 5.12
M14 2.00 2.00 4.50 0.15 0.60 23.36 0.60 3.0 15.7 19.37 6.03
M16 2.00 2.00 5.00 0.20 0.80 26.75 0.60 3.0 17.7 22.49 6.87
M20 2.50 2.50 7.00 0.20 0.80 33.53 0.80 3.5 22.4 28.19 8.60
M24 3.00 3.00 8.00 0.20 0.80 39.98 0.80 4.5 26.4 33.61 10.35
M30 3.50 3.50 10.00 0.20 0.80 50.85 1.00 5.2 33.4 42.75 12.80
l mm
12 14 16 18 20 22 25 28 30 35 40 45 50 55 60 65 70 75 80 85-120
toler ± 0.35 ± 0.42 ± 0.50 ± 0.60 ± 0.70
Back to Index I
S
O
���������� ��������������
���������
�
� �
�������������������������� �� �
���
��
�
�
������
��
� � ���� �
��
����������
�������� � �
���
S k
d
min max min nom max
M8 x 1.00 12.73 13.00 5.15 5.30 5.45 Dimensions for
M10 x 1.00 16.73 17.00 6.22 6.40 6.58 Screw (Set) DIN 961
M10 x 1.25 16.73 17.00 6.22 6.40 6.58
M12 x 1.25 18.67 19.00 7.32 7.50 7.68
Grade 8.8 and 10.9
M12 x 1.50 18.67 19.00 7.32 7.50 7.68 Range M8 - M24
M14 x 1.50 21.67 22.00 8.62 8.80 8.98
M16 x 1.50 23.67 24.00 9.82 10.00 10.18
DIMENSIONS
Dimensions in millimetres
M20 x 1.50 29.67 30.00 12.29 12.50 12.72
M24 x 2.00 35.38 36.00 14.79 15.00 15.22
a C e r U da dw k`
min max min max min min max max min min
M8 x 1.00 1.25 2.50 0.15 0.60 14.38 0.4 1.8 9.2 11.63 3.61
M10 x 1.00 1.50 3.50 0.15 0.60 18.90 0.4 2.2 11.2 15.63 4.35
M10 x 1.25 1.50 3.50 0.15 0.60 18.90 0.4 2.2 11.2 15.63 4.35
M12 x 1.25 1.75 4.00 0.15 0.60 21.10 0.6 2.6 13.7 17.37 5.12
M12 x 1.50 1.75 4.00 0.15 0.60 21.10 0.6 2.6 13.7 17.37 5.12
M14 x 1.50 2.00 4.50 0.15 0.60 24.49 0.6 3.0 15.7 20.37 6.03
M16 x 1.50 2.00 5.00 0.20 0.80 26.75 0.6 3.0 17.7 22.49 6.87
M20 x 1.50 2.50 7.00 0.20 0.80 33.53 0.8 3.5 22.4 28.19 8.60
M24 x 2.00 3.00 8.00 0.20 0.80 39.98 0.8 4.5 26.4 33.61 10.35
l mm
12 14 16 18 20 22 25 28 30 35 40 45 50 55 60 65 70 75 80 85-120
toler ± 0.35 ± 0.42 ± 0.50 ± 0.60 ± 0.70
Back to Index I
S
O
���������� ��������������
���������
�
�
�
������������������������ �� �
���
��
�
�
������
��
� � ���� �
��
����������
�������� � �
���
S k
d
Dimensions for min max min nom max
Screw (Set) ISO 8676 M8 x 1.00 12.73 13.00 5.15 5.30 5.45
M10 x 1.00 15.73 16.00 6.22 6.40 6.58
Grade 8.8 and 10.9 M10 x 1.25 15.73 16.00 6.22 6.40 6.58
Range M8 - M24 M12 x 1.25 17.73 18.00 7.32 7.50 7.68
M12 x 1.50 17.73 18.00 7.32 7.50 7.68
M14 x 1.50 20.67 21.00 8.62 8.80 8.98
DIMENSIONS
a C e r U da dw k`
min max min max min min max max min min
M8 x 1.00 1.25 2.50 0.15 0.60 14.38 0.4 1.8 9.2 11.63 3.61
M10 x 1.00 1.50 3.50 0.15 0.60 17.77 0.4 2.2 11.2 14.63 4.35
M10 x 1.25 1.50 3.50 0.15 0.60 17.77 0.4 2.2 11.2 14.63 4.35
M12 x 1.25 1.75 4.00 0.15 0.60 20.03 0.6 2.6 13.7 16.63 5.12
M12 x 1.50 1.75 4.00 0.15 0.60 20.03 0.6 2.6 13.7 16.63 5.12
M14 x 1.50 2.00 4.50 0.15 0.60 23.36 0.6 3.0 15.7 19.37 6.03
M16 x 1.50 2.00 5.00 0.20 0.80 26.75 0.6 3.0 17.7 22.49 6.87
M20 x 1.50 2.50 7.00 0.20 0.80 33.53 0.8 3.5 22.4 28.19 8.60
M24 x 2.00 3.00 8.00 0.20 0.80 39.98 0.8 4.5 26.4 33.61 10.35
l mm
12 14 16 18 20 22 25 28 30 35 40 45 50 55 60 65 70 75 80 85-120
toler ± 0.35 ± 0.42 ± 0.50 ± 0.60 ± 0.70
Back to Index I
S
O
���������� �������������������
����������� �
�������������������������� �
�
�� �
� �
��� �
�
���
��
� � � ���
��
����������
�������� � �
�
S k
d
min max min nom max Dimensions for
M6 9.78 10.00 3.85 4.00 4.15 Screw (Set) DIN 558
M8 12.73 13.00 5.15 5.30 5.45
M10 16.73 17.00 6.22 6.40 6.58 Grade 4.8
M12 18.67 19.00 7.32 7.50 7.68 Range M6 - M30
M14 21.67 22.00 8.62 8.80 8.98
M16 23.67 24.00 9.82 10.00 10.18
DIMENSIONS
M20 29.67 30.00 12.29 12.50 12.71 Dimensions in millimetres
M24 35.38 36.00 14.79 15.00 15.21
M30 45.00 46.00 18.44 18.70 18.96
P a C e r U da dw k`
lead min max min max min min max max min min
M6 1.00 1.00 2.00 0.15 0.50 11.05 0.25 1.5 6.8 8.88 2.70
M8 1.25 1.25 2.50 0.15 0.60 14.38 0.40 1.8 9.2 11.63 3.61
M10 1.50 1.50 3.50 0.15 0.60 18.90 0.40 2.2 11.2 15.63 4.35
M12 1.75 1.75 4.00 0.15 0.60 21.10 0.60 2.6 13.7 17.37 5.12
M14 2.00 2.00 4.50 0.15 0.60 24.49 0.60 3.0 15.7 20.37 6.03
M16 2.00 2.00 5.00 0.20 0.80 26.75 0.60 3.0 17.7 22.49 6.87
M20 2.50 2.50 7.00 0.20 0.80 33.53 0.80 3.5 22.4 28.19 8.60
M24 3.00 3.00 8.00 0.20 0.80 39.98 0.80 4.5 26.4 33.61 10.35
M30 3.50 3.50 10.00 0.20 0.80 50.85 1.00 5.2 33.4 42.75 12.80
l mm
12 14 16 18 20 22 25 28 30 35 40 45 50 55 60 65 70 75 80 85-120
toler ± 0.35 ± 0.42 ± 0.50 ± 0.60 ± 0.70
Back to Index I
S
O
�� ��������������������
�����������
�
�
�
� ���
�
��
�
�
�
�
� �
� � ������
� ���
�� � �
Dimensions for
D k
Cup Oval SABS 916 d
min max min max
Grade 4.8 and 8.8 M12 20.3 21.6 8.5 9.6
Range M12 - M20 M16 27.5 28.8 11.7 12.8
M20 34.4 36.0 14.9 16.0
Dimensions in millimetres
DIMENSIONS
ds P a t r f h g
min max lead max min max min max min max nom nom
M12 11.73 12.00 1.75 4.0 5.5 7.0 0.8 1.1 16.0 17.5 4.5 6.0
M16 15.73 16.00 2.00 5.0 7.5 9.0 0.8 1.1 21.5 23.0 6.0 8.0
M20 19.67 20.00 2.50 7.0 9.5 11.0 1.0 1.5 25.5 27.0 6.0 10.0
l l < 125
mm ± 0.70
M12 x 50 b 30 + 3.5
M16 x 60 b 38 + 4.0
M20 x 65 b 38 + 5.0
M20 x 75 b 46 + 5.0
M20 x 90 b 46 + 5.0
Back to Index I
S
O
�������������������
�� �����������
� �
� �
� ���
��
�
�
�
�
�
� ������
��� ���
�
Dimensions for
Cup Squares
D B SABS 1143
d
min max min max
Grade 4.8 and 8.8
M8 16.9 18.0 4.0 4.8
Range M8 - M16
M10 21.2 22.5 5.0 5.8
M12 25.7 27.0 6.0 6.8 Dimensions in millimetres
M16 34.4 36.0 8.0 8.9
DIMENSIONS
Full thread
ds P a E r1 r R A
min max lead max min max ~ min max ~ min max
M8 7.78 8.00 1.25 2.5 4.0 4.8 1.2 0.3 0.8 12.3 7.78 8.58
M10 9.78 10.00 1.50 3.5 5.0 5.8 1.5 0.3 0.8 15.7 9.78 10.58
M12 11.73 12.00 1.75 4.0 6.0 6.8 1.8 0.3 1.3 19.5 11.73 12.70
M16 15.73 16.00 2.00 5.0 8.0 8.9 2.4 0.3 1.3 24.8 15.73 16.70
l 25 30 35 40 45 50 55 60 65 70 75 80 85-125
mm ± 0.42 ± 0.50 ± 0.60 ± 0.70
M8 b 22 + 2.5
M10 b 26 + 3.0
M12 b 30 + 3.5
M16 b 38 + 4.0
Back to Index I
S
O
�
�������������������
�����������
�
� ���
�
�
��������
��
�
�
�
� � ������
���
��� �
�
ds P a E r F R
min max lead max min max max ± ~
M10 9.78 10.00 1.50 3.5 2.1 2.5 0.8 1.25 8.0
M12 11.73 12.00 1.75 4.0 2.6 3.0 1.3 1.50 10.0
M16 15.73 16.00 2.00 5.0 3.5 4.0 1.3 2.00 13.0
M20 19.67 20.00 2.50 7.0 4.5 5.0 1.8 2.50 16.0
l 25 30 35 40 45 50 55 60 65 70 75 80 85-125
mm ± 0.42 ± 0.50 ± 0.60 ± 0.70
M10 b 26 + 3.0
M12 b 30 + 3.5
M16 b 38 + 4.0
M20 b 46 + 5.0
Back to Index I
S
O
� ���
������
�
��
�
�
� ������
���
�
��� �
Dimensions for
Square Neck
d
D B (Plough) Bolts
min max min max
SABS 1143
M10 17.0 20.0 6.0 7.5
M12 20.4 24.0 7.2 9.0 Grade 4.8 and 8.8
M16 27.2 32.0 9.6 12.0 Range M10 - M16
DIMENSIONS
Dimensions in millimetres
Full thread
ds P a E r
min max lead max min max ~
M10 9.78 10.00 1.50 3.5 9.78 10.68 0.8
M12 11.73 12.00 1.75 4.0 11.73 12.70 1.3
M16 15.73 16.00 2.00 5.0 15.73 16.70 1.3
l 25 30 35 40 45 50 55 60 65 70 75 80 85-125
mm ± 0.42 ± 0.50 ± 0.60 ± 0.70
M10 b 26 + 3.0
M12 b 30 + 3.5
M16 b 38 + 4.0
Back to Index I
S
O
������ �
���
�������
�
�
�
�
��
�
�
�
��
�
�
Dimensions for
Nut DIN 934
Range M6 - M30
Dimensions in millimetres
DIMENSIONS
P e bore dia. da dw S m mw
min min max min max min min max min max min
M6 1.00 11.05 4.92 5.15 6.00 6.75 8.9 9.78 10.00 4.70 5.00 3.76
M8 1.25 14.38 6.45 6.91 8.00 8.75 11.6 12.73 13.00 6.14 6.50 4.91
M10 1.50 18.90 8.38 8.67 10.00 10.80 15.3 16.73 17.00 7.64 8.00 6.11
M12 1.75 21.10 10.11 10.44 12.00 13.00 17.1 18.67 19.00 9.64 10.00 7.71
M14 1.75 24.49 11.79 12.24 14.00 15.10 19.8 20.67 22.00 10.30 11.00 8.24
M16 2.00 26.75 13.84 14.21 16.00 17.30 22.5 23.67 24.00 12.30 13.00 9.84
M20 2.50 32.95 17.30 17.74 20.00 21.60 27.7 29.16 30.00 14.90 16.00 11.92
M24 3.00 39.55 20.75 21.38 24.00 25.90 33.3 35.00 36.00 17.70 19.00 14.16
M30 3.50 50.85 26.29 26.74 30.00 32.40 42.8 45.00 46.00 22.70 24.00 18.16
Back to Index I
S
O
������ �
���
�������
�
�
�
�
��
�
�
�
��
�
�
Dimensions for
Nut ISO 4032
Range M6 - M30
Dimensions in millimetres
DIMENSIONS
P e bore dia. da dw S m mw
min min max min max min min max min max min
M6 1.00 11.05 4.92 5.15 6.00 6.75 8.9 9.78 10.00 4.90 5.20 3.90
M8 1.25 14.38 6.45 6.91 8.00 8.75 11.6 12.73 13.00 6.44 6.80 5.20
M10 1.50 17.77 8.38 8.67 10.00 10.80 14.6 15.73 16.00 8.04 8.40 6.40
M12 1.75 20.03 10.11 10.44 12.00 13.00 16.6 17.73 18.00 10.37 10.80 8.30
M14 1.75 23.36 11.79 12.24 14.00 15.10 19.6 20.67 21.00 12.10 12.80 9.68
M16 2.00 26.75 13.84 14.21 16.00 17.30 22.5 23.67 24.00 14.10 14.80 11.30
M20 2.50 32.95 17.30 17.74 20.00 21.60 27.7 29.16 30.00 16.90 18.00 13.50
M24 3.00 39.55 20.75 21.38 24.00 25.90 33.3 35.00 36.00 20.20 21.50 16.20
M30 3.50 50.85 26.29 26.74 30.00 32.40 42.8 45.00 46.00 24.30 25.60 19.40
Back to Index I
S
O
�
���
�
��
Dimensions for
Washers DIN 126
for
Range for Bolts M6 - M72 d1 d2 s metric
bolts
6.6 12.5 1.6 6
DIMENSIONS
Back to Index I
S
O
���������������������������������
FASTENERS
�������������