This document provides assembly instructions for a simple paper guitar model in 5 steps: 1) Punch holes in the headstock and thread strings through, gluing ends to the headstock and bridge. 2) Glue the brown side face to the front and attach the back. 3) Put the bridge over the strings and cut off excess. 4) Glue on the triangular back of the neck. 5) Attach the two side flaps where the neck meets the body.
This document provides assembly instructions for a simple paper guitar model in 5 steps: 1) Punch holes in the headstock and thread strings through, gluing ends to the headstock and bridge. 2) Glue the brown side face to the front and attach the back. 3) Put the bridge over the strings and cut off excess. 4) Glue on the triangular back of the neck. 5) Attach the two side flaps where the neck meets the body.
This document provides assembly instructions for a simple paper guitar model in 5 steps: 1) Punch holes in the headstock and thread strings through, gluing ends to the headstock and bridge. 2) Glue the brown side face to the front and attach the back. 3) Put the bridge over the strings and cut off excess. 4) Glue on the triangular back of the neck. 5) Attach the two side flaps where the neck meets the body.
the black dots on the headstock. 2. Thread a string through each hole, glue it to the back of the headstock, then glue the other end to the bridge area (slightly darker rectangle) 3. Put the bridge over the strings, then cut off excess strings 4. Glue the brown side face to the front, then put on the back 5. Glue on the triangular back of the neck