Professional Documents
Culture Documents
Page 1 of 2
Shutdown SIS
Previous Screen
Tilt Cylinders
SMCS - 5104-11; 5104-12
2. Disconnect the wire (2) for the kickout magnet from the cylinder, on right cylinder only.
4. Remove the bolt and pin (3) from the rod end of cylinder. Remove the washers.
5. Remove the bolt and pin from the head end of cylinder and main frame.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 9/14/2019
910,910E,910F,910FII,910G,910GII Compact Wheel Loader 80U00001-UP (MACHINE... Page 2 of 2
2. Install the pin and bolt for the head end of cylinder.
3. Install the rod end of the cylinder into position between the levers.
4. Install the washers (1), pin and the bolt that fastens the pin to levers.
6. On right cylinder only, connect the wire for the kickout magnet.
Copyright 1993 - 2019 Caterpillar Inc. Sat Sep 14 09:17:01 UTC+0700 2019
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 9/14/2019