atomised zinc particles that are bound together with a unique and highly conductive binder. It bonds Zinga has all of the advantages of hot-dip extremely well onto correctly prepared steel, brass, galvanising and zinc thermal spray, aluminium and cast-iron to form a solid zinc layer but with none of their application containing a minimum of 96% zinc in the dry film. and over-coating problems. 2. cove 72m 2 ra ge pe r kg at 50 µm DFT
Zinga is: Technical Specification
• Easy to use. • One component. Surface Preparation Grit blast to SA2.5 • A cost-effective alternative to hot-dip galvanising. (Rz 50 - 70 μm) • Highly resistant to mechanical abrasion. Approx. Drying Times @15ºC • Certified as non-flammable (BS476 parts 6 & 7) for fire Touch Dry 10 mins propagation and spread of flame. Dry to Handle 30 mins • Certified low smoke emissions BS6853 – B2. • Certified low toxicity BS6853-D8.4. Overcoat with Zinga 30 - 60 mins • Certified to Norsok M501-7 and M501-1 (rev6). 3 Overcoat with Epoxy 24 hrs • Certified to ISO12944 – 6. Application Temp Range -15ºC to +40ºC Zinga can: Application Humidity Range <95% • Be used to repair or build-up existing hot-dip Substrate Temp >3ºC above Dew Point galvanising. • More than double the service-life of a duplex coating Thinner Zingasolv system. Cleaner Zingasolv/Gunwash • Be applied onto damp surfaces and at very high Pot Life Unlimited humidity (95%). Packaging Available in • Be applied down to -15°C to +40°C 1Kg Can • Be welded through to x-ray quality up to 60 microns 2Kg Can dry film thickness 5Kg Can Zinga offers: 10Kg Can • Longer protection than hot-dip galvanising of the same 25Kg Can thickness (DFT) 500ml Aerosol • Easy on-site application • Extreme adhesion properties onto steel and other Coverage & Consumption metallic surfaces When brushed, rolled or spray applied the layer • Extreme flexibility: it will not crack or delaminate thickness will be 50μm DFT. At this film thickness Zinga • Minimal preparation on existing hot dip galvanising will provide a coverage of 2.72m²/kg. • Cathodic protection • Unlimited pot & shelf life • Lower environmental impact Vs HDG process Full product specification sheets are available to download at www.zinga-uk.com or from our office on 01243 770 726.
2 | ZINGA MGDUFF COLD APPLIED GALVANISING SYSTEM | 3