You are on page 1of 4

OBJECTIVE

The purpose of doing this project, DC Motor Speed Controller is to:


1. Vary the speed of the motor according to the requirements.
2. Get the required operations.
3. Control the movement of the motor or robotic vehicles.
4. Save energy.
PROBLEM STATEMENT
1. High usage of energy.
2. Do not have an accurate speed controller.
3. To produce a monitor which can evaluate the machine performance.
4. Lack of device which can maintain the speed of an equipment.
GANTT CHART
The table below shows a Gantt chart. This chart represents the timeline of our
group’s work pace. However, some of the tasks had been delayed due to some unexpected
problems. The project Gantt chart shown as below:

WEEK WEEK WEEK WEEK WEEK WEEK


TASK STATUS
9 10 11 12 13 14

P
Group Meeting
(Tasks Given)
A

P
Decide the Title
of Project
A

Build up the P
Circuit and
Prepare the
Report A

Demonstrate the P
Project and
Submit the
Report A

PLAN

ACTUAL
MINUTES MEETING
1. Date: 03/05/2019
Time: 2.00 p.m. – 4.00 p.m.
Venue: Ruang Gunasama Kolej Kediaman Bestari
Attendance:
a) Ain Nadiah binti Haris Suhairi
b) Azuliana Azwin binti Azmi
c) Nurul Natasya Jannah binti Nadzri
d) Nurul Syafiqah binti Mohd Zahel
e) Qistina binti Ahmad Fizal
f) Koh Kai Li
Agenda:

Time (p.m.) Particular

02:00 – 02:10 Group member arrival.

02:10 – 03:10 a. Selecting a group leader.


b. Discuss the two project titles and decide which title is
going to pick.
c. Selecting relevant information source.

03:10 – 03:30 Task distribution.

03:30 – 03:50 Meeting conclusion.

03:50 – 04:00 Meeting dismissal.

Prepared by,

(KOH KAI LI)

Checked by,

(AIN NADIAH BINTI HARIS SUHAIRI)


2. Date: 08/05/2019
Time: 8.00 p.m. – 10.00 p.m.
Venue: Ruang Gunasama Kolej Kediaman Bestari
Attendance:
a) Ain Nadiah binti Haris Suhairi
b) Azuliana Azwin binti Azmi
c) Nurul Natasya Jannah binti Nadzri
d) Nurul Syafiqah binti Mohd Zahel
e) Qistina binti Ahmad Fizal
f) Koh Kai Li
Agenda:

Time (p.m.) Particular

08:00 – 08:10 Group member arrival.

08:10 – 08:40 Discuss how to start to develop the circuit by refer to the source
collected.

08:40 – 09:30 Discussion on which components are used.

09:30 – 09:45 Meeting conclusion.

09:45 – 10:00 Meeting dismissal.

Prepared by,

(KOH KAI LI)

Checked by,

(AIN NADIAH BINTI HARIS SUHAIRI)


3. Date: 26/05/2019
Time: 8.00 p.m. – 10.00 p.m.
Venue: Ruang Gunasama Kolej Kediaman Bestari
Attendance:
a) Ain Nadiah binti Haris Suhairi
b) Azuliana Azwin binti Azmi
c) Nurul Natasya Jannah binti Nadzri
d) Nurul Syafiqah binti Mohd Zahel
e) Qistina binti Ahmad Fizal
f) Koh Kai Li
Agenda:

Time (p.m.) Particular


08:30 – 08:35 Group member arrival.
08:35 – 08:50 Discuss and check the content of report.
Compiling all the report documentation and meeting
08:50 – 09:55 conclusion.
09:55 – 10:00 Meeting dismissal.

Prepared by,

(KOH KAI LI)

Checked by,

(AIN NADIAH BINTI HARIS SUHAIRI)

You might also like