Professional Documents
Culture Documents
Ece 127 Project-: (Arduino Bluetooth Car)
Ece 127 Project-: (Arduino Bluetooth Car)
INTRODUCTION
Arduino Uno is a microcontroller board based on the ATmega328P. It has
14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog
inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP
header and a reset button. It contains everything needed to support the
microcontroller; simply connect it to a computer with a USB cable or power it
with an AC-to-DC adapter or battery to get started. You can tinker with your
UNO without worrying too much about doing something wrong, worst case
scenario you can replace the chip for a few dollars and start over again.
In this project we are making an automatic car powered by an Arduino
Uno and controlled by an android application by used of the Bluetooth
module.
OBJECTIVES
To be able to control the Arduino Bluetooth Car by an android application.
To program a programmable language to Arduino Uno.
EQUIPMENTS
Soldering iron
Soldering lead
Soldering pump
Glue gun
Hand Drill
Plier
Components Quantity
Arduino Uno 1
Bluetooth Module 1
Motor Driver 2
DC Motor 4
Wheel 4
Battery 1
Case 1
LED 2
Buzzer 1
Connecting Wire Set(male- 2
male, male –female)
Circuit Diagram
15 | D E P A R T M E N T O F E L E C T R I C A L E N G I N E E R I N G
16 | D E P A R T M E N T O F E L E C T R I C A L E N G I N E E R I N G