Professional Documents
Culture Documents
Fiat Marea 97-98 Alarma GEMINI Pin Out y Cables PDF
Fiat Marea 97-98 Alarma GEMINI Pin Out y Cables PDF
: 14-8A / G8
ALARM POSITIONING
Compact units and sirens ð On the shock absorber turret on the driver’s side or behind the passenger’s
Control units and modules light.
ð Behind the passenger’s glove box or under the driver’s dashboard.
WIRING LOCATION ð Original harness on the passenger’s side on the battery support.
EARTH CONNECTION
Positive and Negative ð To the battery terminals.
N.B. on vehicles introduced after January 1999, the ABI is positioned under the rear seat.
DIRECTION INDICATOR LIGHTS: L. BLUE-BLACK 1 mmsq. Mod. < ’99: Connector:: 18-pin
WHITE-RED connected to the fuse
L. BLUE 1 mmsq.
box.
Mod. ’99: in the wiring harness from
the blinker switch positioned on the
left side behind the passenger’s
glove box.
IGNITION LIVE: RED-YELLOW 1 mmsq. Connector::18-pin WHITE connected
to the ABI unit behind the
passenger’s glove box.
Position: N. 7
1° ENGINE IMMOBILISATION: (starter motor) RED-BLACK 2,5 mmsq. Connector:: 3-pin TRANSPARENT
connected to the ignition switch..
"
Use a 30 Amp. Gemini 2352 module.
2° ENGINE IMMOBILISATION: (injection-petrol and ORANGE 2,5 mmsq. Connector:: 3-pin TRANSPARENT
diesel vehicles) connected to the ignition switch.
"
2° ENGINE IMMOBILISATION: (fuel pump-petrol VIOLET-BLACK 1,5 mmsq. Mod. < ’99: connected to the inertial
and diesel vehicles) switch under the front driver’s seat.
Mod. ’99: connected to the inertial
"
switch behind the driver’s kick plate.
To open:
CENTRAL DOOR LOCKING: - diagram N. 2. Connector:: 18-pin WHITE
WHITE 0,75 mmsq
Common negative. connected to the ABI unit behind the
To close: passenger’s glove box.
L. BLUE 0,75 mmsq Position: N. 16 and N. 15
ELECTRIC WINDOWS: use a 2243 or 2343 Front: a. b. Connector:: 20-pin WHITE
module. a. + é L.h.s.: VIOLET-YELLOW connected to the ABI unit behind the
b. + é R.h.s.: VIOLET-WHITE passenger’s glove box.
"
Rear: Position: N. 16 and N. 15
c. + é L.h.s.: WHITE-GREEN c. d. Connector:: 8-pin WHITE
d. + é R.h.s.: WHITE-RED connected to the rear windows
All o f 1,5 mmsq. closure unit fixed under the rear seat
on the driver’s side.
Position: N. 7 and N. 5.
DOOR PIN SWITCHES : Connector:: 16-pin BLACK
WHITE-RED 0,75 mmsq.
Use two diodes to separate the lines. connected to the ABI unit behind the
passenger’s glove box.
Position: N. 1.
BONNET PIN SWITCH: Install the button supplied
with the kit on the driver’s or passenger’s light.
BOOT PIN SWITCH: RED-GREY 0,75 mmsq. Connector:: 16-pin BLACK
or connected to the ABI unit behind the
RED-GREEN 0,75 mmsq. passenger’s glove box.
Position: N. 14