Professional Documents
Culture Documents
1
Calibration Services Distributor
Pressure gauge
Services
2
Calibration RPS Device - Pumping Unit Closed Circuit -
2) Put the gauge on the pressure intake of concrete flow solenoid valve
Pressure regulation on the pump/s.
intake
3) On the rear panel turn the “Local-Remote” key switch on “Remote”.
10) Turn the rear panel rps potentiometer clockwise completely (“+ rps”
position) and check the pressure value shall be the maximum value
Bias
3
Calibration hydraulic radiator fan
2) With the help of a tachometer, located near the fan, turn the
adjustment screw until you reach the desired speed of the
fan (2300g/min)
5
Proper wear ring fitting
Compensation
Ring 1 - 1,5mm MAX