This document provides instructions for flashing the firmware on a Zain Internet OTG v5 modem. The steps include:
1. Installing all necessary drivers and performing a jumper trick to reset the modem.
2. Connecting the modem to the computer via USB and powering it on, verifying that it is detected correctly.
3. Running firmware erasure and loading software, pressing buttons when prompted, and waiting for processes to complete.
4. Once the flashing is complete, as indicated by an LED turning off, disconnecting the USB and power cables and connecting an Ethernet cable to configure the modem settings.
This document provides instructions for flashing the firmware on a Zain Internet OTG v5 modem. The steps include:
1. Installing all necessary drivers and performing a jumper trick to reset the modem.
2. Connecting the modem to the computer via USB and powering it on, verifying that it is detected correctly.
3. Running firmware erasure and loading software, pressing buttons when prompted, and waiting for processes to complete.
4. Once the flashing is complete, as indicated by an LED turning off, disconnecting the USB and power cables and connecting an Ethernet cable to configure the modem settings.
This document provides instructions for flashing the firmware on a Zain Internet OTG v5 modem. The steps include:
1. Installing all necessary drivers and performing a jumper trick to reset the modem.
2. Connecting the modem to the computer via USB and powering it on, verifying that it is detected correctly.
3. Running firmware erasure and loading software, pressing buttons when prompted, and waiting for processes to complete.
4. Once the flashing is complete, as indicated by an LED turning off, disconnecting the USB and power cables and connecting an Ethernet cable to configure the modem settings.
1.Do the jumper trick. (The baklas modem, short pins). 2.Connect Male to Male USB cable 3.Connect power supply (Dapat May Tutunog sa Speaker at kailangan walang ilaw si 936 pero detected siya as comport) 4.Run B315s-936 Erase NVRAM.exe 5.Press 3 then press Enter 6."Waiting for the Device, Please press enter when Computer detects it." (Dapat May Tutunog sa speaker at iilaw ang white led) 7."If you see the string "Product : balongv7r2" Press Enter." Hintayin Matapos ang Erase Command. 8.Kung Tapos na, Tangalin ang power supply at ikabit ulit (Dapat May Tutunog sa speaker) 9.Run Balong_USB_Loader_1.0.1.10.exe 10.Hit Enter kapag may lumabas na "The USBLoader has been loaded successfully. Press any key" (Wait 10 Seconds dapat may tutunog sa speaker) 11.Run B315s-936_21.329.01.01.19 Zain Internet OTG v5.exe 12.Wait mo hanggang matapos, 13.Pag namatay na ang BLUE LED, tapos na ang FLASHING 14.Tangalin na yung Power Supply, USB Cable at Jumper 15.Connect mo yung LAN Cable at Power Supply. 16.Browse 192.168.8.1 sa browser then check the Quick Setup Instructions Folder sa files.