100% found this document useful (2 votes)
12K views1 page

Visual Inspection Report PDF

The document is a visual examination report from a welding inspections company. It lists details of welds that were inspected such as part numbers, serial numbers, welder information, and findings. Any welds found acceptable are documented along with size and code references. It also lists any welds that required repair work. The report is reviewed and signed by the inspector and client.

Uploaded by

BernathTurnip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (2 votes)
12K views1 page

Visual Inspection Report PDF

The document is a visual examination report from a welding inspections company. It lists details of welds that were inspected such as part numbers, serial numbers, welder information, and findings. Any welds found acceptable are documented along with size and code references. It also lists any welds that required repair work. The report is reviewed and signed by the inspector and client.

Uploaded by

BernathTurnip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

The Welding Inspections Community

https:[Link]
contact@[Link]

VISUAL EXAMINATION REPORT


Client:
Job title:
Job No. Part No. Serial No. Inspection date Sheet No. Report No.

Acceptance criteria: Procedure:


Item No.
Dwg. No.
The following items/weld joints have been inspected and found acceptable in accordance with reference Code
Section mentioned as above.

Part/Weld Weld size Evaluation


No. Welder WPS No. Findings Remarks
Identification [mm] [Acc./Rej.]

The following items/weld joints subjected to repair

1 - - - - - - -

Legends:
Acc.: Accepted Rej: Rejected
C : Crack U : Undercut LP : Lack of Penetration
SP : Cluster Porosity CR : Crater Crack P : Porosity
LF : Lack of Fusion CL : Cold Lap ARK : Arc Strike
Inspected by Reviewed by Client
Name
Signature
Date

WIC_VT Rev. 00

You might also like