Professional Documents
Culture Documents
Operating Instructions Blu-Ray Disc Player: TM Model No. DMP-BDT330 DMP-BDT230
Operating Instructions Blu-Ray Disc Player: TM Model No. DMP-BDT330 DMP-BDT230
Operating Instructions
Blu-ray DiscTM Player
Model No. DMP-BDT330
DMP-BDT230
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 16) or
http://panasonic.jp/support/global/cs/ (This site is in English only.)
GN GC GA GW VQT4W95
until
2013/3/18
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 2 ページ 2013年2月27日 水曜日 午前11時2分
CAUTION
Unit
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted candles,
on this unit.
Precautions ≥ This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile telephone.
[For[Australia[and[New[Zealand]
≥ This unit is intended for use in moderate climates.
WARNING [Except[Australia[and[New[Zealand]
≥ This unit is intended for use in tropical climates.
Unit Placement
To reduce the risk of fire, electric shock or product damage, Place this unit on an even surface.
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this To reduce the risk of fire, electric shock or product damage,
unit. ≥ Do not install or place this unit in a bookcase, built-in cabinet or
≥ Use only the recommended accessories. in another confined space. Ensure this unit is well ventilated.
≥ Do not remove covers. ≥ Do not obstruct this unit’s ventilation openings with newspapers,
≥ Do not repair this unit by yourself. Refer servicing to qualified tablecloths, curtains, and similar items.
service personnel. ≥ Do not place the unit on amplifiers/receivers or equipment that
≥ Do not let metal objects fall inside this unit. may become hot. The heat can damage the unit.
≥ Do not place heavy items on this unit. ≥ Do not expose this unit to direct sunlight, high temperatures,
high humidity, and excessive vibration.
AC mains lead
To reduce the risk of fire, electric shock or product damage, Batteries
≥ Ensure that the power supply voltage corresponds to the Mishandling of batteries can cause electrolyte leakage and may
voltage printed on this unit. cause a fire.
≥ Insert the mains plug fully into the socket outlet. ≥ Danger of explosion if battery is incorrectly replaced. Replace
≥ Do not pull, bend, or place heavy items on the lead. only with the type recommended by the manufacturer.
≥ Do not handle the plug with wet hands. ≥ When disposing the batteries, please contact your local
≥ Hold onto the mains plug body when disconnecting the plug. authorities or dealer and ask for the correct method of disposal.
≥ Do not use a damaged mains plug or socket outlet. ≥ Do not mix old and new batteries or different types at the same
time.
The mains plug is the disconnecting device. ≥ Do not heat or expose to flame.
Install this unit so that the mains plug can be unplugged from the ≥ Do not leave the battery(ies) in a car exposed to direct sunlight
socket outlet immediately. for a long period of time with doors and windows closed.
Small object ≥ Do not take apart or short circuit.
Keep the Memory Card out of reach of children to prevent ≥ Do not recharge alkaline or manganese batteries.
swallowing. ≥ Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for
a long period of time. Store in a cool, dark place.
Figure A Figure B
Fuse cover
2 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 3 ページ 2013年2月27日 水曜日 午前11時2分
[For[Singapore]
Complies with
IDA Standards
DB01017
VQT4W95
3
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 4 ページ 2013年2月27日 水曜日 午前11時2分
Table of contents
Precautions . . . . . . . . . . . . . . . . . 2
Reference
Troubleshooting guide . . . . . . . . 37
Messages . . . . . . . . . . . . . . . . . . 41
Specifications . . . . . . . . . . . . . . . 43
Limited Warranty (ONLY FOR
AUSTRALIA) . . . . . . . . . . . . . . . 47
4 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 5 ページ 2013年2月27日 水曜日 午前11時2分
Check the supplied accessories before using this ∫ Clean this unit with a soft, dry cloth
Getting started
unit. ≥ Never use alcohol, paint thinner or benzine to
1 Remote control clean this unit.
(N2QAYB000878) ≥ Before using chemically treated cloth, carefully
2 Batteries for remote control read the instructions that came with the cloth.
1 HDMI Cable
[For[Australia,[New[Zealand[and[India] ∫ This unit’s lens
1 AC mains lead Lens cleaner: RP-CL720AE
[For[the[Middle[East[and[South[East[Asia] ≥ This lens cleaner may not be for sale
Playback
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine,
R6/LR6, AA thinner, static electricity prevention liquids or
(Alkaline or manganese batteries) any other solvent.
Point it at the remote control signal sensor on this ≥ Clean any dust, water, or foreign matter from
unit. (> 10) the terminals on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
Settings
VQT4W95
5
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 6 ページ 2013年2月27日 水曜日 午前11時2分
Playable media
BD-Video Video
DVD-Video Video
DVD-R
Video, AVCHD, MKV,
Xvid, JPEG, MPO,
DVD AAC, FLAC, MP3,
WAV, WMA
DVD-R DL
DVD-RW
Video, AVCHD
— +R/+RW/+R DL
≥ See pages 7 and 43 for more information on the types of content that can be played.
6 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 7 ページ 2013年2月27日 水曜日 午前11時2分
Getting started
supported or previously described. the recorder to play on this unit. Please refer to
≥ DVD-RAM the recorder’s instructions.
≥ Super Audio CD
≥ Photo CD ∫ BD-Video
≥ DVD-Audio ≥ This unit supports high bit rate audio (Dolby®
≥ Video CD and Super Video CD Digital Plus, Dolby® TrueHD, DTS-HD High
≥ HD DVD Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.
∫ Region management information ≥ [BDT230] If “Dolby D/Dolby D +/Dolby TrueHD” is
set to “PCM” and “DTS Neo:6” is set to “Off”,
BD-Video:
[For[South[East[Asia]
the maximum possible number of Dolby® sound
This unit can play is 5.1ch PCM. (> 31, 32)
Example:
BD-Video discs
supporting the
region code “A”. ∫ 3D
≥ 3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
[For[Australia,[New[Zealand[and[the[Middle[East]
This unit can play
Cable.
Example:
BD-Video discs ≥ 2D video can be enjoyed as 3D virtually. (> 29)
supporting the
region code “B”.
∫ Music CD
Operation and sound quality of CDs that do not
conform to CD-DA specifications (copy control
[For[India]
CDs, etc.) cannot be guaranteed.
This unit can play Example:
BD-Video discs
supporting the ∫ SD card
region code “C”.
≥ miniSD Cards, microSD Cards,
microSDHC Cards and
microSDXC Cards can be used,
DVD-Video: but must be used with an adaptor
[For]the]Middle]East] card. These are usually supplied
This unit can play Example: with such cards, or otherwise
DVD-Video discs
supporting the
customer provided.
2 ≥ To protect the card’s contents,
region number “2” or
“ALL”. 2 ALL 3
5 move the record prevention tab (on the SD
[For[South[East[Asia]
card) to “LOCK”.
This unit can play ≥ This unit is compatible with SD Memory Cards
Example:
DVD-Video discs that meet SD Card Specifications FAT12 and
supporting the
region number “3” or 2 FAT16 formats, as well as SDHC Memory
“ALL”. 3 ALL 3
4 Cards in FAT32 format and SDXC Memory
Cards in exFAT.
[For[Australia[and[New[Zealand]
≥ If the SD card is used with incompatible
This unit can play Example:
DVD-Video discs computers or devices, recorded contents may
supporting the
2 be erased due to the card being formatted etc.
region number “4” or
“ALL”. 4 ALL 3
4
≥ Usable memory may be slightly less than the
card capacity.
[For[India]
This unit can play Example:
DVD-Video discs
supporting the
region number “5” or 2
“ALL”. 5 ALL 3
5
VQT4W95
7
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 8 ページ 2013年2月27日 水曜日 午前11時2分
∫ USB device
≥ This unit does not guarantee connection with all
USB devices.
≥ This unit does not support USB device
charging.
≥ FAT12, FAT16, FAT32, and NTFS file systems
are supported.
≥ This unit supports USB2.0 High Speed.
≥ This unit can support an HDD formatted to
FAT32 and NTFS.
Some types of HDD may require the use of its
external power supply unit.
∫ BD-RE, BD-R
Discs recorded in DR mode using Panasonic
Blu-ray Disc recorders may not play back the
audio etc., correctly.
≥ It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.
≥ The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in these operating instructions. Read the disc’s
instructions carefully.
8 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 9 ページ 2013年2月27日 水曜日 午前11時2分
Getting started
11
2 TV operation buttons
You can operate the Panasonic TV using the
1 unit’s remote control. Some buttons may not
2 work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
12
[i j VOL] : Adjust the volume
3 13 3 Select title numbers, etc./Enter numbers or
14 characters
4 ヤモワヤユロ モヶュリヰチ
4 Cancel
15
5 5 Select audio (> 20)
6 Basic playback control buttons (> 20)
6 7 Show USB Sharing menu (> 27)
8 Show Top menu (> 21)
9 Show Option menu (> 28)
10 Coloured buttons (red, green, yellow, blue)
7 16 Used for various purposes depending on the
17
display
18 11 Transmit the remote control signal
8
12 Open or close the disc tray (> 17)
19 13 Show status messages (> 21)
14 Show MiracastTM screen (> 24)
9 20
15 Show the Home screen of the VIERA
10 Connect (> 23)
16 Exit the menu screen
17 Show Pop-up menu (> 21)
18 Show HOME menu (> 18)
19 [3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 20)
20 Return to previous screen
VQT4W95
9
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 10 ページ 2013年2月27日 水曜日 午前11時2分
8 11
[BDT330]
1 2 3 4 5 6 7 9 10
8 9 10 11
Pull to flip down the front panel.
[BDT230]
SD CARD
1 2 4 6 7
10 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 11 ページ 2013年2月27日 水曜日 午前11時2分
Connecting to a TV
Getting started
Connect the AC mains lead after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters or less.
The HDMI-compliant cable is supplied with this unit.
[For]the]Middle]East]
[For[South[East[Asia]
AC mains lead with a label is for Thailand.
AC mains lead without a label is for areas other than Thailand.
To a household mains
socket
HDMI cable (supplied)
HDMI IN
AC mains lead
(supplied)
[BDT230]
≥ This unit consumes a small amount of AC power (> 43) even when turned off. For the purpose of
power conservation, the unit can be disconnected if you will not be using it for extended period of
time.
VQT4W95
11
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 12 ページ 2013年2月27日 水曜日 午前11時2分
Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
HDMI AV OUT
HDMI cable
(supplied) HDMI cable
HDMI OUT HDMI IN
HDMI IN (ARC) (ARC)
[BDT230] Amplifier/receiver
You can enjoy richer sound by using the HDMI AV OUT SUB terminal.
HDMI IN HDMI IN
Amplifier/receiver
12 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 13 ページ 2013年2月27日 水曜日 午前11時2分
OPTICAL
[BDT330]
OPTICAL IN
[BDT230]
VQT4W95
13
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 14 ページ 2013年2月27日 水曜日 午前11時2分
[BDT330]
[BDT230]
[BDT330]
LAN Cable
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.
14 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 15 ページ 2013年2月27日 水曜日 午前11時2分
VQT4W95
15
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 16 ページ 2013年2月27日 水曜日 午前11時2分
Firmware updates
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Easy Occasionally, Panasonic may release updated
Network Setting” in the Setup menu. (> 33)
≥ You can redo these settings individually using “Network
firmware for this unit that may add or improve the
Settings”. (> 33) way a feature operates. These updates are
≥ Do not use this unit to connect to any wireless network for available free of charge.
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
This unit is capable of checking the firmware
not have usage rights may be displayed; however, using automatically when connected to the Internet via
these networks may be regarded as illegal access. a broadband connection.
≥ After performing network settings on this unit, the settings
(encryption level, etc.) of the wireless router might change. When a new firmware version is available, the
When you have trouble getting online on your PC, perform following message is displayed.
the network settings on your PC in accordance with the
settings of the wireless router.
≥ Please be aware that connecting to a network without New firmware is available.
encryption may result in the content of the communication Please update firmware in Setup.
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
To update the firmware
*1
SSID:
An SSID (Service Set IDentification) is a name used by
Press [HOME]
wireless LAN to identify a particular network. Transmission > press [OK] to select “Setup”
is possible if the SSID matches for both devices. > select “Player Settings”
*2
The wireless router compatible with Wi-Fi Protected
> select “System” and press [OK]
SetupTM may have the mark.
> select “Firmware Update” and press [OK]
> select “Update Now” and press [OK]
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 36,
“Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 36)
16 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 17 ページ 2013年2月27日 水曜日 午前11時2分
USB1 USB2
SD CARD
Playback
Notes
≥ When inserting a media item, ensure that it is
facing the right way up.
≥ When removing the SD card, press the centre
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥ When you connect a USB HDD, use the right
USB port (USB2).
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
VQT4W95
17
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 18 ページ 2013年2月27日 水曜日 午前11時2分
Major functions of this unit can be operated from Disc Play back the contents.
the HOME menu. (> 20)
≥ When multiple contents
Preparation USB are recorded, select the
Turn on the TV and select the appropriate video types of contents or the
input on the TV. title.
≥ “USB1” indicates the
1 Press [Í] to turn on the unit.
SD Card left USB port, while
≥ After network service introduction banner is “USB2” indicates the
shown, the HOME menu is displayed. right one. (> 17)
– When connected to the network, the
banner content may be changed.
– You can disable the “Start-up Banner” Network
(> 36).
Displays the Home
2 Press [OK] or [3, 4, 2, 1] to select the
Network Service screen of VIERA
item. Connect. (> 23)
≥ If there are any other items, repeat this
step. DLNA Client (> 25)
Videos
Setup
Register
1st user
Player Settings (> 30)
≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when
using a disc with both data files (MP3, JPEG, MKV, etc.)
and Video (BDAV and AVCHD). (> 36)
18 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 19 ページ 2013年2月27日 水曜日 午前11時2分
Playback
wallpaper. (> 28, “Wallpaper”)
VQT4W95
19
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 20 ページ 2013年2月27日 水曜日 午前11時2分
Pause
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart
play.
20 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 21 ページ 2013年2月27日 水曜日 午前11時2分
BD-Video
T1 C1 0:05.14
Play
0:20.52
C D
Playback
A T: Title, C: Chapter, PL: Playlist
B Elapsed time in the title
C Current position
D Total time
e.g., JPEG
Date 11.12.2007
Size 500X375
Manufacturer
Equipment
VQT4W95
21
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 22 ページ 2013年2月27日 水曜日 午前11時2分
22 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 23 ページ 2013年2月27日 水曜日 午前11時2分
VIERA Connect
(Enjoying Internet ≥ When playing content in the media, VIERA Connect
cannot be accessed by pressing [INTERNET].
XXXXXX
XXXXX
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXX
MORE
XXXXXXXXXXX BACK
XXXXXX, XXXX
39°C
XXXX
XXXXXXXX Market
XXXX
Playback
Internet
Preparation
≥ Network connection (> 14)
≥ Network setting (> 15)
1 Press [INTERNET].
2 Select the item and press [OK].
VQT4W95
23
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 24 ページ 2013年2月27日 水曜日 午前11時2分
Using MiracastTM
You can enjoy the content you are viewing on a
Miracast-compatible smartphone, etc. on the big
screen of your TV.
≥ Compatible with AndroidTM device, ver. 4.2 and
above and Miracast certified.
For information on whether the smartphone,
etc. supports Miracast, contact the
manufacturer of the device.
Miracast compatible
Player
device
1 Press [MIRACAST].
2 Operate the Miracast compatible device.
≥ On the device, enable Miracast and select
this unit (DMP-BDT330 or DMP-BDT230)
as the device to be connected.
For details, refer to the instructions
supplied with the device.
24 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 25 ページ 2013年2月27日 水曜日 午前11時2分
Playback
Server To exit from Home Network
Press [HOME].
Preparation
1 Perform network connection (> 14) and
network settings (> 15) of this unit.
2 Perform Home Network settings of the
connected equipment.
When connected to other than DIGA,
3 Add the contents and folder to the libraries of
the Windows Media® Player or the
smartphone, etc.
≥ Playlist of Windows Media® Player can play
back only the contents that are stored in the
libraries.
When connected to DIGA,
3 Register this unit to your DIGA.
VQT4W95
25
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 26 ページ 2013年2月27日 水曜日 午前11時2分
Server *
To exit from Media Renderer screen
Renderer Press [HOME].
Controller
*
About DLNA and Media Renderer
For more details, refer to the following website and the
operating instructions for each of the equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ Wi-Fi Direct connection while using Home Network feature
Server * is only temporary, and the network connection method
i returns to the original setting when exiting.
Controller ≥ Depending on the device or connection environment, the
Renderer data transfer rate may decrease.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
* DMC compatible software should be installed. ≥ Items displayed in grey on the display cannot be played
back by this unit.
≥ This unit can be played back via connected equipment only
Preparation when controlled using DMC.
Perform steps 1 and 2. (> 25)
3 Add the contents and folder to the libraries of
the Windows Media® Player or the
smartphone, etc.
≥ Playlist of Windows Media® Player can play
back only the contents that are stored in the
libraries.
4 Perform the “Remote Device Settings”.
(> 34)
≥ You can register up to 16 devices.
26 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 27 ページ 2013年2月27日 水曜日 午前11時2分
Playback
≥ Press the red button on the remote control
Automatic input switching again to cancel.
Power on link 4 Press [OK].
Subtitle
1ENG Dolby TrueHD ...
Set the still picture as your user icon. (> 19)
Angle –
Repeat Play
Status
Off
∫ Video
Primary Video
Secondary Video
1MPEG-4 AVC
The recording method of original video appears.
Top Menu
Pop-up Menu
∫ Primary Video
The recording method of original primary video
appears.
2 Select an item and change the settings. ∫ Secondary Video
To exit the screen Select on/off for images. The
Press [OPTION]. recording method of original
video appears.
Video
Regarding Language : (> 44) ≥ During search/slow motion
or frame-by-frame, only the
primary video is displayed.
Select on/off for audio and the
Operation Menu Soundtrack
language.
∫ Soundtrack ∫ Top Menu
Show or change the soundtrack. Display Top Menu.
∫ Audio channel ∫ Pop-up Menu
Select the audio channel number. Display Pop-up Menu.
∫ Subtitle ∫ Menu
Change the subtitle settings. Display Menu.
∫ Angle
Select the number of the angle.
28 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 29 ページ 2013年2月27日 水曜日 午前11時2分
∫ Progressive
Select the method of conversion for progressive
3D Settings
output to suit the type of material being played.
≥ If the video is disrupted when “Auto” is ∫ Signal Format
selected, select either “Video” or “Film”
depending on the material to be played back. Original Keep original picture format.
3D picture format comprising
∫ 24p Side by side
of left and right screens.
Movies and other material recorded on Converts 2D pictures to 3D
DVD-Video at 24p are output at 24p. 2D to 3D
effect.
≥ This works only in the following cases:
– [BDT330] when “24p(4K)/24p Output” is set to ∫ Distance
“24p(4K)” or “24p” (> 30) and the disc Set the amount of depth perception.
recorded at a rate of 60 fields per second is
played back. ∫ Graphic Display Level
– [BDT230] when “24p Output” is set to “On” 3D position for the Option menu or message
(> 30) and the disc recorded at a rate of screen, etc. can be adjusted during 3D playback.
60 fields per second is played back.
≥ This may not work with the PAL contents.
Settings
VQT4W95
29
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 30 ページ 2013年2月27日 水曜日 午前11時2分
System
≥ “24p(4K)” works only when playing back in
2D.
OK
RETURN ≥ When playing DVD-Video, set this setting to
“24p(4K)” or “24p”, and then “24p” in “Picture
4 Select an item and change the settings. Settings” (> 29) to “On”.
≥ When BD-Video/DVD-Video images other
To exit the screen
than 24p are played, images are output at
Press [HOME].
60p.
*1
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in
accordance with the film materials.
*2
A high resolution image/display technology of
approximately 4000 (width) k 2000 (height) pixels.
30 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 31 ページ 2013年2月27日 水曜日 午前11時2分
VQT4W95
31
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 32 ページ 2013年2月27日 水曜日 午前11時2分
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
≥ The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
∫ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch)
before it is output.
≥ This function works when the following
conditions are met:
– Audio is output from the HDMI AV OUT
terminal.
– Audio recorded at 96 kHz or lower is output.
– “Digital Audio Output” is set to “PCM” when
audio other than PCM is output.
32 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 33 ページ 2013年2月27日 水曜日 午前11時2分
Language Network
∫ Soundtrack Preference ∫ Easy Network Setting (> 15)
Choose the language for audio.
∫ Network Settings
≥ If “Original” is selected, the original language of
each disc will be selected. Perform network-related settings individually.
≥ Enter a code (> 44) when you select “Other Press [OK] to show the following settings:
¢¢¢¢”.
¾ LAN Connection Mode
∫ Subtitle Preference Select the LAN connection method.
Choose the language for the subtitle. ≥ Select “Wireless Master” when you make a
≥ If “Automatic” is selected and the language direct wireless connection between this unit
selected for “Soundtrack Preference” is not and a Home Network device. Internet
available, subtitles of that language will connection is not available when this item is
automatically appear if available on that disc. selected.
≥ Enter a code (> 44) when you select “Other
¢¢¢¢”. ¾ Wireless Settings
This allows the wireless router and connection
∫ Menu Preference settings to be set. Current connection settings
Choose the language for the disc menus. and connection state can be checked.
≥ Enter a code (> 44) when you select “Other Press [OK] to show the following settings:
¢¢¢¢”.
Connection Setting
[Except[South[East[Asia] The wireless router connection wizard will be
∫ Subtitle Text displayed.
Select a suitable item according to the language Double Speed Mode Setting (2.4GHz)
used for MKV/Xvid subtitles text. Set the connection speed for a 2.4 GHz
≥ This item is displayed only after playing back a wireless format.
file. ≥ If you connect using the “Double Speed
[For[South[East[Asia] Mode (40MHz)”, 2 channels use the same
∫ On-Screen Language frequency band, and there is consequently
a greater risk of reception interference. This
Choose the language for menus and on-screen
can cause the connection speed to drop or
messages.
become unstable.
VQT4W95
33
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 34 ページ 2013年2月27日 水曜日 午前11時2分
34 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 35 ページ 2013年2月27日 水曜日 午前11時2分
¾ TV System
System Perform the setup so it matches the TV System
of the connected TV.
∫ Easy Settings
You can execute basic settings. ¾ Screen Saver Function
This is to prevent image retention on the
∫ TV Settings
screen.
Press [OK] to show the following settings: ≥ When this is set to “On”:
If a list of playback content is displayed and
¾TV Aspect
there is no operation for 10 minutes or more,
Set to match the type of TV connected. the screen switches to HOME menu
When connected to a 4:3 aspect TV and playing automatically.
16:9 ratio image: ≥ While playing and pausing, etc., this function
The sides are is not available.
cut off so the ¾ On-Screen Messages
picture fills
Choose whether to show status messages
4:3 Pan & Scan the screen.
automatically.
When playing BD-Video,
video is output as “4:3 ¾ HDMI CEC
Letterbox”. Set to use “HDMI CEC” function when
Black bands connected via HDMI cable to a device that
appear at supports “HDMI CEC”.
4:3 Letterbox the top and ≥ Select “Off” when you do not want to use
bottom of “HDMI CEC”.
the picture.
VQT4W95
35
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 36 ページ 2013年2月27日 水曜日 午前11時2分
∫ Quick Start
Speed of start-up from standby mode is
increased.
≥ When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase so compared to when set to “Off”.
(About the power consumption > 43)
∫ Remote Control
Change the remote control code if other
Panasonic products react to this remote control.
36 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 37 ページ 2013年2月27日 水曜日 午前11時2分
¾ Select “Yes” in “Default Settings” in the Setup still does not recognize the connection, turn
menu. (> 36) this unit off and on again.
¾ USB devices may not be recognized by this
To return all settings to the factory preset. unit when connected using the following :
¾ Reset the unit as follows: – a USB hub
1 Turn the unit on. – a USB extension cable
2 Press and hold [OK], the yellow button and ¾ If you connect USB HDD to this unit, use the
the blue button on the remote control at the USB cable that is supplied with the HDD.
same time for more than 5 seconds. ¾ When you connect a USB HDD, use the right
– “00 RET” is displayed on the unit’s display. USB port (USB2). (> 17)
3 Press [1] (right) repeatedly on the remote
Reference
VQT4W95
37
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 38 ページ 2013年2月27日 水曜日 午前11時2分
38 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 39 ページ 2013年2月27日 水曜日 午前11時2分
Audio Playback
Cannot switch audio. Disc cannot be played.
¾ The audio cannot switch, if “Digital Audio ¾ The disc is dirty. (> 5)
Output” is set to “Bitstream”. Set “Digital ¾ The disc is not finalized. (> 7)
Audio Output” to “PCM”. (> 31)
Still pictures (JPEG) do not play back
Cannot hear the desired audio type. normally.
¾ Check the connections and the “Digital Audio ¾ The images that were edited on the PC, such
Output” settings. (> 12, 31) as Progressive JPEG, etc., may not be played
¾ [BDT330] When connecting this unit to a TV back.
via an HDMI AV OUT MAIN and to an
I can’t play back BD-Live.
amplifier/receiver via an HDMI AV OUT SUB,
set “HDMI(SUB) Output Mode” to ¾ Confirm that this unit is connected to the
“V.OFF(Video Off)”. (> 12) broadband Internet. (> 14)
¾ To output audio from a device connected with ¾ Confirm the “BD-Live Internet Access”
an HDMI cable, set “HDMI Audio Output” to settings. (> 34)
“On” in the Setup menu. (> 31) ¾ Confirm a USB device is connected to the
USB port. (> 17)
There is no sound coming out from the TV.
[BDT330]
¾ Audio may not output from the TV when the
amplifier/receiver is connected to the HDMI
AV OUT SUB, and “HDMI(SUB) Output
Mode” (> 31) is set to “V.OFF(Video Off)”. In
such a case, output audio from the amplifier/
receiver. To output audio from the TV, set the
“HDMI(SUB) Output Mode” to “Normal”.
Reference
VQT4W95
39
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 40 ページ 2013年2月27日 水曜日 午前11時2分
Network
I can’t connect to the network.
¾ Confirm the network connection and settings.
(> 14, 15, 33)
¾ There may be obstacles that prevent the unit
from detecting your home network. Bring the
unit and the wireless router closer to each
other. This unit may be able to detect your
network name (> 16, “SSID”).
¾ Check the operating instructions for each
device and connect accordingly.
40 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 41 ページ 2013年2月27日 水曜日 午前11時2分
VQT4W95
41
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 42 ページ 2013年2月27日 水曜日 午前11時2分
START
¾ The system is being restarted during the
firmware update. Please do not turn off the
unit.
UPD/
(“ ” stands for a number.)
¾ The firmware is being updated.
Please do not turn off the unit.
FIN
¾ The firmware update is complete.
¾ Copying is complete.
42 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 43 ページ 2013年2月27日 水曜日 午前11時2分
File
General format
Extension Reference
Dimensions [BDT330]
(WkHkD) 430 mmk41 mmk184 mm
Including the [BDT230]
projecting parts 430 mmk38 mmk184 mm
Mass [BDT330]
Approx. 1.6 kg
Reference
[BDT230]
Approx. 1.4 kg
VQT4W95
43
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 44 ページ 2013年2月27日 水曜日 午前11時2分
44 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 45 ページ 2013年2月27日 水曜日 午前11時2分
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/ The software categorized as (3) - (5) are distributed in the hope
Progressive” are trademarks of Panasonic Corporation and Sony that it will be useful, but WITHOUT ANY WARRANTY, without
Corporation. even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Please refer to the detailed
Java is a registered trademark of Oracle and/or its affiliates. terms and conditions thereof shown in the Player Settings menu.
At least three (3) years from delivery of this product, Panasonic
Manufactured under license from Dolby Laboratories. will give to any third party who contacts us at the contact
Dolby and the double-D symbol are trademarks of Dolby information provided below, for a charge no more than our cost of
Laboratories. physically performing source code distribution, a complete
machine-readable copy of the corresponding source code covered
Manufactured under license under U.S. Patent Nos: 5,956,674; under GPL V2.0, LGPL V2.1 or the other licenses with the
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; obligation to do so, as well as the respective copyright notice
7,392,195; 7,272,567 & other U.S. and worldwide patents issued thereof.
& pending. DTS-HD, the Symbol, & DTS-HD and the Symbol Contact Information: oss-cd-request@gg.jp.panasonic.com
together are registered trademarks & DTS-HD Master Audio is a The source code and the copyright notice are also available for
trademark of DTS, Inc. Product includes software. © DTS, Inc. All free in our website below.
Rights Reserved. http://panasonic.net/avc/oss/bdplayer/AWBPM13A.html
HDMI, the HDMI Logo, and High-Definition Multimedia Interface Adobe Flash Lite for Digital Home Software licensed by Adobe
are trademarks or registered trademarks of HDMI Licensing LLC Systems Incorporated or its affiliates.
in the United States and other countries.
For Adobe Flash Lite for Digital Home Software (“Flash
This product is licensed under the AVC patent portfolio license and Software”), please be aware of the following.
VC-1 patent portfolio license for the personal and non-commercial (i) You are not permitted to distribute and copy this Flash Software
use of a consumer to (i) encode video in compliance with the AVC to any third party,
Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) (ii) You are not permitted to modify the Flash Software and create
decode AVC/VC-1 Video that was encoded by a consumer derivative works of the Flash Software,
engaged in a personal and non-commercial activity and/or was (iii)You are not permitted to decompile, reverse engineer,
obtained from a video provider licensed to provide AVC/VC-1 disassemble and otherwise reduce the Flash Software to a
Video. No license is granted or shall be implied for any other use. human-perceivable form,
Additional information may be obtained from MPEG LA, LLC. (iv)You are not permitted to claim any damages, including direct,
See http://www.mpegla.com. indirect, special, incidental, punitive, and consequential
damages arising out of or in connection with the Flash
VIERA Connect is a trademark of Panasonic Corporation. Software,
(v) You fully agree that the ownership of the Flash Software is that
MPEG Layer-3 audio coding technology licensed from Fraunhofer of Panasonic Corporation and/or its suppliers or licensors,
IIS and Thomson. (vi)You agree and acknowledge that it is possible that you cannot
access the contents unless you do not obtain and install the
SDXC Logo is a trademark of SD-3C, LLC. latest version of the Flash Software.
“DVD Logo” is a trademark of DVD Format/Logo Licensing David M. Gay’s dtoa and strtod license
Corporation. The author of this software is David M. Gay.
Copyright (c) 1991, 2000, 2001 by Lucent Technologies.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Permission to use, copy, modify, and distribute this software for
Alliance. any purpose without fee is hereby granted, provided that this
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. entire notice is included in all copies of any software which is or
includes a copy or modification of this software and in all copies of
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “Miracast”, “WPA” the supporting documentation for such software.
and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR,
service marks, or certification marks of the Digital Living Network NEITHER THE AUTHOR NOR LUCENT MAKES ANY
Alliance. REPRESENTATION OR WARRANTY OF ANY KIND
CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE
Windows is a trademark or a registered trademark of Microsoft OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
Corporation in the United States and other countries.
“UNICODE, INC. LICENSE AGREEMENT - DATA FILES AND
Android is a trademark of Google Inc. SOFTWARE
Unicode Data Files include all data files under the directories
Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance http://www.unicode.org/Public/, http://www.unicode.org/reports/,
Corporation trademark. Protected by U.S. Patent 7,369,677 and and http://www.unicode.org/cldr/data/.
worldwide patents issued and pending under license from Verance Unicode Software includes any source code published in the
Corporation. All rights reserved. Unicode Standard or under the directories
http://www.unicode.org/Public/,
This product incorporates the following software: http://www.unicode.org/reports/, and
(1) the software developed independently by or for Panasonic http://www.unicode.org/cldr/data/.
Corporation, NOTICE TO USER: Carefully read the following legal agreement.
(2) the software owned by third party and licensed to Panasonic BY DOWNLOADING, INSTALLING, COPYING OR OTHERWISE
Corporation, USING UNICODE INC.’S DATA FILES (““DATA FILES””), AND/OR
(3) the software licensed under the GNU General Public License, SOFTWARE (““SOFTWARE””), YOU UNEQUIVOCALLY
Version 2.0 (GPL V2.0), ACCEPT, AND AGREE TO BE BOUND BY, ALL OF THE TERMS
(4) the software licensed under the GNU LESSER General Public AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT
License, Version 2.1 (LGPL V2.1), and/or AGREE, DO NOT DOWNLOAD, INSTALL, COPY, DISTRIBUTE
Reference
(5) open source software other than the software licensed under OR USE THE DATA FILES OR SOFTWARE.
the GPL V2.0 and/or LGPL V2.1. COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1991-2009 Unicode, Inc. All rights reserved.
Distributed under the Terms of Use in
http://www.unicode.org/copyright.html.
VQT4W95
45
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 46 ページ 2013年2月27日 水曜日 午前11時2分
(1) MS/WMA
This product is protected by certain intellectual property rights of
Microsoft Corporation and third parties. Use or distribution of such
technology outside of this product is prohibited without a license
from Microsoft or an authorized Microsoft subsidiary and third
parties.
(2) FLAC, WPA Supplicant
The software licenses are displayed when “Software Licence” in
the Setup menu is selected. (> 36)
46 VQT4W95
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 47 ページ 2013年2月27日 水曜日 午前11時2分
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic Australia
website www.panasonic.com.au or contact by phone on 132 600
Reference
If phoning in, please ensure you have your operating instructions available.
VQT4W95
47
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 48 ページ 2013年2月27日 水曜日 午前11時2分
(Inside of product)
Panasonic Corporation p
Web Site: http://panasonic.net
VQT4W95
C Panasonic Corporation 2013 F0213ST0