Professional Documents
Culture Documents
COP 3038
FACE DRILLING II
FD3/pi-iv 29/3/04 7:47 am Page ii
Atlas Copco launches the super-fast 30 kW hydraulic rock drill COP 3038
for tunnelling and drifting applications, which represents a major step
in new product development. After more than 700,000 metres of test
drilling in various geological conditions, the COP 3038 design has pro-
ved to drill amazingly 50% faster than its predecessor COP 1838 ME.
You can both see and virtually hear the difference.
frequency performer
COP 3038 Top hammer rock drill for hole diameter range 43 - 64 mm
The COP 3038 rock drill is suitable for face drilling appli- performance, usage of the patented Secoroc Magnum
cations, especially where major benefits can be derived SR 35 system is recommended. COP 3038 can also be
from extraordinary high penetration rates such as in tun- used for rock reinforcement drilling at reduced power in
nelling, drifting and room and pillar mining. COP 3038 combination with a R32 shank adapter and a down-sized
is intended for 43 to 64 mm diameter holes using a T38 drill string.
shank adapter. For best service life and optimum drilling
Technical data
COP 3038
Weight, incl. adapter 165 kg
Length, excl. adapter 990 mm
Impact power, max 30 kW
Impact rate 102 Hz
Hydraulic pressure, max 200 bar
Rotation speedrange, max 0-380 rpm
Flushing water 20-40 bar
Lubrication air, max 6 bar
Shank adapter T38
The new Rocket Boomer designation system, Rocket Boomer L32, L = large, 3 = 30kW, 2 = rig with two booms.
IV
IV FACE DRILLING