Professional Documents
Culture Documents
Boltec 235H-DCS
700
2270
6550
A fully mechanized rock bolting rig for bolt lengths Optional equipment
1.5 – 2.4 m. Effective in roof heights up to 8 m Swellex kit
(max. 9.7 m). Bolt rotator kit
Resin/Cement cartridge kit
Splitset kit
• MBU bolting unit with a unique design based on a Exhaust water scrubber
single feed system utilizing a cradle indexer at the rear Exhaust catalyzer
end and a robust drill steel support plus indexer for ANSUL fire suppression system ANSUL
Electric cable warning device
grouting at the top end. Low-mounted magazine for 10 Electrical system 1000 V, direct start only
bolts, designed for maximum flexibility during drilling Water hose reel ø1400 mm
and bolting. Manual lubrication system
Rig washing kit, with hose and reel
• DCS, direct hydraulic control system for drilling Automatic boom lubrication system, rear part of boom
and bolting, that incorporates an excellent Reverse alarm
antijamming function and RPCF (Rotation Pressure Beacon warning lamp
Controlled Feed force).
• COP 1532 rock drill, shortest in its class, with modern
hydraulic reflex dampening gives genuine high speed
drilling and excellent drill steel economy. Separately
variable frequency and impact power can be adapted
to certain drill steel/rock conditions.
• BUT 35HB heavy-duty boom for direct, fast and
accurate positioning between holes. Improved linkage
bearings in main boom joints and new axial bearings
in all boom joints reducing maintenance requirements.
• Sturdy, articulated carrier with four wheel drive
for easy manoeuvring in narrow tunnels and drifts.
Power steering, fail-safe brakes and central lubricated
chassis. Four jacks for stable set up.
• Basic rig includes telescopic FOPS-approved Main specifications
protective roof, cable reel, search light (1x 70 W), work
Boltec 235H-DCS
lights (3 x 500 W halogen), bolt rack, water booster
Rock drill 1 x COP 1532
pump, compressor, air receiver and pump unloading Bolting unit MBU
function for easier start. Boom 1 x BUT 35HB
Drilling system DCS 12-55
Length, tramming 12050 mm
Width, excl bolt rack 2155 mm
Height 2270 mm
Turning radius 5800/3300 mm
Weight 16000 kg
Boltec SL
A semi-mechanized rock bolting rig with electrical pump unloading function for easier start with low vol-
remote control system for safety and productivity. tage. Standardization with Rocket Boomer S1L on high
capacity 55 kW electric motor and powerpack.
For bolt lengths 1.6 – 1.8 m. Effective in roof
• Minimum tramming height 1.3 m.
heights up to 1.8 m
Optional equipment
• Rock bolting with Swellex bolts, resin grouted rebar
Automatic boom lubrication system, rear part
bolts or mechanical bolts. Hole size diameter 29 up to
Bolt rotator for max 240 Nm/ 810 rpm or max 480 Nm/450 rpm
51 mm. In 1.8 m roof height max. bolt length is Rock drill lubrication warning kit
1.6 - 1.8 m depending on bolt type. Swellex installation equipment
• Resin bolting quality is controlled by pre-setting the Alternative roof stops; min 1500 mm, max 1700 mm
bolt rotator’s speed, torque and acting time for Exhaust catalyser
Fire suppression system Ansul
accurate mixing and curing of the resin. Guards to prevent start of tramming with jacks down, slide
• Swellex bolting quality is controlled by pre-setting beam out or roof up
the inflation time. Safety belt
Rear view mirrors
• Extension drilling up to 51 mm enables installation of Beacon warning lamp
Connectable Swellex rockbolts up to any lengths in low Back-up alarm
roof heights. Electric outlet for accessories
• Electrical pilot system with controls for positioning, Rig washing kit, with water hose and reel
Manual lubrication system
drilling and bolting in a portable operator’s control
panel.
• MBU 16SL bolting unit with a unique design based on
a single feed system utilizing a cradle indexer at the
rear end and a robust drill steel support at the top end.
Designed for maximum flexibility during drilling and
bolting. Bolting unit is connected to the boom via a
flexible positioning unit.
• Extendable protective roof at the bolting unit for
improved operator’s safety. Hydraulic jacks to support
the panel roof at the bolting unit with a force of 80 kN.
Main specifications
• COP 1028HB is a light rock drill with separate reversible
rotation and stepless variable rotation speed, and high Boltec SL
torque capacity that contribute to good drilling results. Rock drill 1 x COP 1028
Bolting unit MBU 16SL
• BUT 32SL heavy-duty boom for direct, fast and Boom 1 x BUT 32SL
accurate positioning between holes. Improved linkage Drilling system EDS
bearings in main boom joints and new axial bearings Length, tramming 10000 mm
in all boom joints reduce maintenance. Width 2480 mm
• Sturdy, articulated carrier with four wheel drive Height, carrier 1300 mm
roof min/max 1300/1700 mm
for fast tramming and easy manoeuvring in narrow Turning radius 6180/3550 mm
tunnels and drifts. Power steering, failsafe brakes and Weight 12800 kg
central lubricated chassis. Four jacks for stable set up.
• Basic rig includes telescopic FOPS-approved protective
roof, cable reel, work lights, water booster pump and Visit www.rockreinforcement.com for more information
Boltec MC and LC
www.atlascopco.com
3010
2265
MC
MC
7385
Boltec MC