Professional Documents
Culture Documents
SOAL
DISUSUN OLEH :
1. M. WARTINO (16050023)
2. IRWANSYAH (16050032)
3. M.THORIQUL ARIF (16050037)
4. DENI RIFKI (16050038)
5. FRISKI IKHWAN (16050039)
34. A controlled heating and cooling process, with the aim of changing the properties
physical and mechanical properties of a material or metal in accordance with the desired.
Thisis the notion of?
a.Heat Magnesium treatment c.Colding
b.Heating d.Heat Treatment
35. Al-Mg Alloy with Mg content less than 17.1% including the heat treatable because
if heated above the solvus line is capable of reaching a single phase.In the above process
is the process that occurs in the alloy?
a. The heat treatment process of magnesium alluminium alloy (Al-Mg)
b. Aluminum Alloy Heat Treatment
c.Analysis of Alloy On Magnesium
d.Heat Treatment Magnesium
36. The process from preheating to rapid cooling is called this process dissolution treatment
on?
a. process of precipitation treatment (precipitation treatment)
b. artificial aging process.
c. treatment solution
d. temperature solvus (solvus line)
37. If after a quick cooling and then reheated until at the bottom of the solvus (solvus line)
temperature is then held within a period of time long and continued with slow cooling in
the air is called the aging process artificial on?
a. Artificial Aging. c. Precipitation Treatment.
b. Solution Treatment d. Aging
38. Heat tetment consists of several process workmanship. Here's what it is not classification
in heat treatment process is ...
a. Hardening c. Annealing
b. Heating d. Carburizing.
39. Heat heating process at a certain temperature, aims to provide an opportunity to form a
regular and uniform structure prior to the cooling process.This is a process in heat
treatments what happened to?
a.Heating
b.Colding
c.Hooling
d.Treatment
40. Their is 3 Process in heat treatment what is it?
a.Hoolding, Haeting, Artificial Aging
b.Treatment, Colding, Carburizing
c.Heating, Hardening, Hoolding
d.Heating, Hoolding, Colding
41. Magnesium obtained from …
a. Soil c. Sea water
b. Mount Merapi Lava d. Well water
42. Stainless weight 56%, high resistance to corrosion, easy to form, (soft and ductile) The
properties above are the properties of the material ...
a. Steel c. Titanium
b. Aluminum d. Copper
43. Silvery white material, weighs only 2/3 as much as aluminum, good casting
characteristics. The above properties are properties of the material ...
a. Magnesium c. Magnesium alloy
b. Pure Magnesium d. Pure magnesium and alloys
44. Properties of titanium with good welding ability, tough, and strong, resistant to
corrosion. Is the nature of titanium type ...
a. Titanium designation A (alpha) c. Titanium designation C (alpha and
b. Titanium called B (beta) beta)
d. Titanium called D (Delta)
45. Titanium properties are resistant to bending, excellent ductility but sensitive to
contamination. Is the nature of titanium type ..
a. Titanium designation A (alpha) c. Titanium designation C (alpha and
b. Titanium called B (beta) beta)
d. Titanium called D (Delta)
46. Titanium properties strong when cold, limp when hot. Is the nature of titanium type ...
a. Titanium designation A (alpha) c. Titanium designation C (alpha and
b. Titanium called B (beta) beta)
d. Titanium called D (Delta)
47. Brass includes a combination of .... and ....!
a. Aluminum and zinc c. Zinc and nickel
b. Iron and zinc d. Copper and zinc
48. The process of altering the properties of metals, especially steels, through the conversion
of microstructure by heating and cooling rate regulation. Is an understanding of ..
a. HEAT TREATMENT c. HARDENING
b. QUENCHING d. ANNEALING
49. Carbon-containing steels ranging from 0.10 to 0.30% are classified as carbon steel.
a. Low carbon
b. Medium carbon
c. High carbon
d. Medium carbon
50. Low carbon steel is classified into what SAE?
a. SAE 1010 - SAE 1030
b. SAE 1035
c. SAE 1095
d. SAE 1100