Professional Documents
Culture Documents
General Catalog: Asia Pacific Europe, Middle East, Africa and India North and South America
General Catalog: Asia Pacific Europe, Middle East, Africa and India North and South America
GENERAL
CATALOG
UNITED STATES AND BELGIUM CHINA
WORLD HEADQUARTERS EUROPE HEADQUARTERS Unit 808, Building B
4901 Kesslersville Road Prijkelstraat 36 Hongwell International Plaza
Easton, PA 18040 USA 9810 Nazareth, Belgium No.1602 West Zhongshan Road
1 800 PICK VIC 32 9 381 15 00 Shanghai, China 200235
1 800 742 5842 49 6151 9573 0 86 21 6021 9400
(within North America) (within Germany) vicap@victaulic.com
1 610 559 3300
viceuro@victaulic.com
pickvic@victaulic.com KOREA
Effective February 2017
victaulic.com
WHERE
Victaulic piping system products are VdS – Verband der LR – Lloyd’s Register SBCCI – Southern Building Code
OGS
tested and certified for a wide range Schadenverhütung GmBH of Shipping (UK) Congress International (USA)
of applications. Victaulic engages (Germany)
with many certifying authorities, RINA – Registro Italiano UPC – Uniform Plumbing
approval bodies, and standards VKF – Vereinigug Kantonaler Navale (Italy) Code (USA)
Feuerversicherungen (Switzerland)
AGS
organizations globally, and maintains USCG – US Coast Guard (USA)
product certifications and strict Zagrebinspekt (Croatia) Pressure Equipment Safety
compliance to applicable codes,
HVAC (97/23/EC) PED – Pressure
INNOVATION
standards, and directives, relevant
Potable Water Equipment Directive (Europe)
VBSP
to specific industries and markets.
CSTB – Centre Scientifique et
ÁNTSZ – Állami Technique du Bâtiment (France) CSA B51 – "Boiler, Pressure
Népegészségügyi És Tisztiorvosi Vessel, and Pressure Piping
PRODUCT CERTIFICATIONS: Szologálat (Hungary) ITB – Instytut Techniki Code" (Canada)
Hole Cut
Budowlanej (Poland)
Fire Protection ARPA – Agenzia Regionale per CRN – Canadian Registration
la Protezione dell’Ambiente (Italy) Sercons Europe BV (Russia) Number per CSA B51 (Canada)
ACTIVFIRE – ActivFire
DVGW – Deutscher Verein des
Expansion
Register of Fire Protection Plumbing
Joints
AND SOLUTIONS
Equipment (Australia) Gas- und Wasserfaches e.V. Chemical Safety / Recycling
(Germany) IAPMO – International
CCCF – China Certification (EC/1907/2006) REACH–
Eurofins – ACS : Attestation de Association of Plumbing & Registration, Evaluation,
Center for Fire Protection Mechanical Officials (USA)
Plain End
Products (China) Conformité Sanitaire (France) Authorization, and Registration
ICC-ES – International of Chemicals (Europe)
CFPSC – Chinese Fire Protection HZJZ – Croatian National
Institute of Public Health Code Council- Evaluation (2002/95/EC) RoHS –
Safety Center (Taiwan) Service (USA)
(Croatia) Restriction of Hazardous
Stainless
CNBOP – Centrum Substances Directive (Europe)
Steel
KWWA – Korea Water and NSF – NSF International (USA)
Naukowo-Badawcze Ochrony
ARE JOINED
Przeciwpozarowej (Poland) Wastewater Works Association WaterMark (Australia) (2002/96/EC) WEEE – Waste
Electrical and Electronic
CNPP – Centre National NSF – NSF International (USA) Equipment Directive (Europe)
Copper
de Prévention et de Protection ÖVGW – Österreichische
(France) Vereinigung für das Gas- Building Services
CTPC – Consiliul Technic und Wasserfach (Austria) COMPLIANCE:
Shouldered
Permanent Pentru Constructii (EU/305/2011) CPR –
PZH – Panstwowy Zaklad
Steel
(Romania) Construction Products Regulation-
Higieny (Poland) Codes and Standards Compliance Fire safety products (Europe)
cULus – Underwriter’s
TOGETHER
RUVZPP – Regionálny úrad ANSI – American National NBC – National Building
Laboratories, LLC (USA) verejného zdravotníctva so Standards Institute (USA) Code (Canada)
AWWA
EMI – Epitesugyi Minosegellenorzo sídlom v Poprade (Slovakia)
API – American Petroleum PSB – TUV SUD PSB
Innovacious (Hungary) SAI – SAI Global (Australia) Institute (USA) Singapore (Singapore)
Performance
FDNY – City of New York SPAN – Suruhanjaya APSAD – Assemblée Plenière
Fire Department (USA)
High
Perkhidmatan Air Negara Société Assurance Dommage Explosive Environments
FM – FM Approvals (USA) (Malaysia) (France)
(94/9/EC) ATEX – Equipment
HDB – Singapore Housing SVGW – Schweizerischer Verein AS/NZS – Standards Australia and protective systems for
Balancing
Hydronic
Development Board (Singapore) des Gas- und Wasserfaches and Standards New Zealand potentially explosive atmospheres
(Sweden) (AU & NZ) (Europe)
KFI – Korea Fire Industry
Technology Institute (Korea) UL – Underwriter’s Laboratories, ASTM – American Society for
LLC (USA) Testing and Materials (USA) Seismic
HDPE
LPCB – Loss Prevention
Certification Board (UK) WaterMark (Australia) AWWA – American Water OSHPD – Office of Statewide
Works Association (USA) Health Planning and
SBSC – Svensk Brand & Säkerhets WRAS – Water Regulations
Development (USA)
Aquamine™
Certifiering AB (Sweden) Advisory Scheme (UK) BOCA – Building Officials and
PVC
Code Administrators (USA)
TFRI – Tanjin Fire Research ZUOVA – ZDRAVOTNÍ
ÚSTAV se sídlem v Ostrave CSA – Canadian Standards Tools and Machinery
Institute of Ministry of Public
Security (China) (Czech Republic) Association (Canada) (2006/42/EC) MD – Machinery
Grooved
Directive (Europe)
PVC
TSU – Technický Skúšobný CSFM – California State
Ústav Pieštany, š.p. (Slovakia) Maritime Fire Marshal (USA)
FRP
GOST R – Gosstandart (Russia) © Copyright 2017, Victaulic ®
TZUS – Technický a Zkuševní BV – Bureau Veritas (France) Company. All rights reserved.
IPC – International Plumbing
Ústav Stavební Praha, s.p. CCG – Canadian Coast Code (USA)
(Czech Republic) No part of this Victaulic catalog
Guard (Canada) may be reproduced, stored in a
Tools
ISO – International Standards
UKRFIRESERT – State CRS – Croatian Register Organization (Global) retrieval system, or transmitted,
Certification Center (Ukraine) of Shipping (Croatia) in any form or by any means,
NACE – National Association electronic, mechanical, photocopy,
UL – Underwriter’s CCS – China Classification
Seals and
of Corrosion Engineers (USA) recording or otherwise, without
Gaskets,
O-Rings
Laboratories, LLC (USA) Society (China) the prior written permission
NFPA – National Fire Protection of Victaulic Company.
ULC – Underwriter’s DNV GL (Global) Association (USA)
Laboratories of Canada (Canada)
KRS – Korean Registry
Design
Data
of Shipping (Korea)
Index
Since the first patent in 1919, Victaulic has delivered TABLE OF CONTENTS
innovative pipe joining solutions that help customers succeed
ii
The Victaulic Difference
worldwide. Look inside many of the world’s most recognizable 1
Original Groove System (OGS)
landmarks and industrial facilities, and you’ll find Victaulic 29 Advanced Groove System (AGS)
solutions at work making bold design innovations possible, 37 Victaulic Bolted Split-Sleeve Products (VBSP)
speeding time to completion, allowing for unpredictable 41 Hole Cut System
seismic movements and setting the stage for scalability. 45 Expansion Joints
51 Plain End System for Carbon Steel
Today, Victaulic supports its customers with manufacturing 53 Stainless Steel System
facilities and branches located around the globe including our 69 Copper System
world headquarters location in Easton, Pennsylvania, USA. 75 Shouldered Steel System
Our international presence ensures that our worldwide 79 AWWA System
customers are served with speed and efficiency. 84 High Performance System for Steam
and Chemical Services
pipe joining and flow control systems, Victaulic has been 101 Refuse-to-Fuse™ HDPE System
GROOVE
GASKET BOLT/NUT
GROOVE
ii G-103 REV A
At the core of all the benefits that Victaulic® solutions bring VICTAULIC® GROOVED END PIPING SYSTEMS PROVIDE:
to a project — such as productivity, safety, design flexibility
and quality — are the unique features of our products.
Easy system maintenance
and expansion – through
simple coupling disassembly
that allows for easy access.
Alignment ease – through
a design that allows for full
rotation of the pipe and
system components
before tightening.
The Victaulic® grooved piping system is the most versatile, consisted of disassembling the coupling by removing the
OGS
economical, and reliable piping system available. It is bolts and nuts, removing the gasket, fitting the gasket over
up to three times faster to install than welding, easier the gap between two grooved pipe ends, wrapping the
and more reliable than threading or flanging, resulting housings around the gasket and then tightening down the
AGS
in lower total installed cost. The system is designed for bolts and nuts. Couplings featuring Installation-Ready
roll grooved or cut grooved standard pipe or roll grooved technology come pre-assembled and are simply pushed
VBSP
light wall pipe. Also, pipe end preparation is fast and easy. onto a grooved pipe end, joined by a second grooved
It can be done on the job site or in the shop with a variety pipe end, and then bolts and nuts are tightened down.
of Victaulic grooving tools. What previously required minutes, now takes only seconds.
Hole Cut
Vic-Boltless Coupling and Tool
PVC
O-Rings
1 G-103 REV A
Index
Intro
Original Groove System (OGS)
OGS
AGS
VBSP
Hole Cut
Expansion
Joints
Plain End
Stainless
Steel
Valves pages Drops and Headers page
Copper
(Series 380) 25
Check Valves 15 – 16
Suction Vibration Isolation Pump Drop
Shouldered
Steel
Ball Valves 16 – 17 (Series 381) 25
AWWA
(Series 382) 25
Triple Service and Delta-Y
Vic-Header (No. 26) 26
Performance
Valve Assemblies 18 – 19
High
Knife Gate Valves 19
Balancing
Hydronic
Diverter Valves 20 Specialty Products page
HDPE
Air Valves 22 – 23 High-Pressure Double Grooved Coupling
Aquamine™
(Style 808) 27
PVC
High-Pressure Ring Coupling (Style 809) 27
Strainers and Diffusers page Grooved
PVC
Vic-Strainer Tee Type (Series 730) 24 Mechanical-T Spigot Outlets (Style 926) 43
-
N
Y™ IO
OGS
AD LAT
RE AL
ST STYLE 107N
IN
AGS
Certifications/Listings:
Plain End
104-1a/37
STYLE 177N
IN
Copper
• Pressures up to 1000 psi | 6895 kPa | 69 bar
AWWA
Performance
High
Certifications/Listings:
Balancing
Hydronic
ST
STYLE 171
IN
PVC
O-Rings
Design
Data
3 G-103 REV A
Index
Intro
Original Groove System (OGS)
OGS
STYLE 07
AGS
Download publication 06.02 for complete information
VBSP
• Sizes from 1 – 12" | DN25 – DN300
• Pressures up to 750 psi | 5171 kPa | 52 bar
Hole Cut
• For sizes 14 – 50" | DN350 – DN1250,
download publication 20.02 for information
on AGS Style W07
Expansion
Joints
Certifications/Listings:
Plain End
104-1a/02
Stainless
Steel
Flexible Coupling
STYLE 77
Copper
Download publication 06.04 for complete information
Shouldered
• Cross-ribbed, two piece housing construction
Steel
• Sizes from ¾ – 24" | DN20 – DN600
• Pressures up to 1000 psi | 6895 kPa | 69 bar
AWWA
• For sizes 14 – 72" | DN350 – DN1800,
download publication 20.03 for information
Performance
on AGS Style W77
High
Certifications/Listings:
Balancing
Hydronic
104-1a/04
HDPE
Flexible Coupling
Aquamine™
STYLE 75
•
Tools
Seals and
Gaskets,
O-Rings
Certifications/Listings:
104-1a/03
Design
WaterMark
Data
Reducing Coupling
OGS
STYLE 750
AGS
Certifications/Listings:
Plain End
104-1a/05
Snap-Joint™ Coupling
STYLE 78
Copper
Certifications/Listings:
Balancing
Hydronic
Outlet Coupling
Aquamine™
STYLE 72
PVC
•
Tools
Seals and
Gaskets,
O-Rings
Certifications/Listings:
Design
Data
5 G-103 REV A
Index
Intro
Original Groove System (OGS)
OGS
STYLE 791 COUPLING AND 792 TOOL
AGS
Download publication 06.11 for complete information
VBSP
• Installed only with Victaulic® Style 792 tool
• Sizes from 2 – 8" | DN50 – DN200
Hole Cut
• Pressures up to 700 psi | 4826 kPa | 48 bar
Expansion
Joints
Certifications/Listings:
Plain End
Download publication 10.01 for complete information
Stainless
Steel
High Pressure Rigid Coupling
STYLE HP-70
Copper
Download publication 06.12 for complete information
Shouldered
• Heavy housing for high pressure service
Steel
• Sizes from 2 – 16" | DN50 – DN400
• Pressures up to 1000 psi | 6895 kPa | 69 bar
AWWA
Performance
High
Certifications/Listings:
Balancing
Hydronic
Download publication 10.01 for complete information
HDPE
XL Couplings for use
with XL Fittings
Aquamine™
PVC
STYLE XL77 AND XL79
Grooved
PVC
Lined Services
Gaskets,
O-Rings
See pg. 28
for information.
Design
Data
Vic-Ring Coupling
OGS
STYLE 41
AGS
•
• For AGS Vic-Ring products, see pg. 32
Expansion
Vic-Ring Coupling
STYLE 44
Copper
• Pressures up to 175 psi | 1207 kPa | 12 bar
• For AGS Vic-Ring products, see pg. 32
Performance
High
O-Rings
Design
Data
7 G-103 REV A
Index
Intro
Original Groove System (OGS)
Vic-Flange Adapter
OGS
STYLE 741
AGS
Download publication 06.06 for complete information
VBSP
• Sizes from 2 – 24" | DN50 – DN600
Pressures up to 300 psi | 2068 kPa | 21 bar
Hole Cut
•
• For AGS sizes 14 – 24" | DN350 – DN600,
download publication 20.04 for information
Expansion
Joints
on AGS Style W741
Certifications/Listings:
Plain End
104-1a/10
Stainless
Steel
Vic-Flange Adapter
STYLE 743
Copper
Download publication 06.06 for complete information
Shouldered
• ANSI Class 300 flanges
Steel
• Sizes from 2 – 12" | DN50 – DN300
• Pressures up to 720 psi | 4964 kPa | 50 bar
AWWA
Performance
High
Certifications/Listings:
Balancing
Hydronic
Download publication 10.01 for complete information
HDPE
Aquamine™
PVC
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
Fittings — Elbows
OGS
Certifications/Listings:
Plain End
Elbows
Copper
Shouldered
90° Elbow 90° 1½ D Long 90° 3 D Long 90° 5 D Long 90° 6 D Long 5D and 6D
Radius Elbow Radius Elbow Radius Elbow Radius Elbow long radius
bends,
AWWA
download
publication
Performance
07.02
High
Balancing
45° Elbow 45° 1½ D Long 45° 3 D Long 45° 5 D Long 45° 6 D Long
Radius Elbow Radius Elbow Radius Elbow Radius Elbow
HDPE
Aquamine™
PVC
O-Rings
9 G-103 REV A
Index
Intro
Original Groove System (OGS)
OGS
Wyes and Laterals
AGS
Download publication 07.01 for complete information
on original grooved end fittings for carbon steel pipe
VBSP
• Standard fitting pressure ratings conform
to ratings of installed coupling
• All fittings supplied with grooves or shoulders
Hole Cut
for fast installation
• Fittings available from ¾ – 24" | DN20 – DN600
Expansion
Joints
• For AGS sizes 14 – 60" | DN350 – DN1500,
Certifications/Listings: download publication 20.05 for complete
information
Plain End
Download publication 10.01 for complete information
Stainless
Steel
Tees, Crosses, Wyes, and Laterals
Copper
Shouldered
No. 20 No. 35 No. 33 No. 29M
Steel
Tee Cross True Wye Tee with
Threaded Branch
AWWA
Performance
High
Balancing
No. 25 No. 29T No. 21
Hydronic
Grooved Branch Threaded Branch Bullhead Tee
Reducing Tee Reducing Tee
HDPE
Aquamine™
PVC
No. 30 No. 30-R No. 32 No. 32-R Grooved
PVC
Adapter Nipple Adapter Nipple Adapter Nipple Swaged Nipple Swaged Nipple Swaged Nipple
(OGS Groove × (OGS Groove × (OGS Groove × (OGS Groove × (OGS Groove × (Thread ×
AWWA
ANSI Class 125 ANSI Class 150 ANSI Class 150 ANSI Class 300 ANSI Class 300
Flanged Adapter Flat Face Flanged Raised Face Flat Face Flanged Raised Face
Nipple Adapter Nipple Flanged Adapter Adapter Nipple Flanged Adapter
Nipple Nipple
FRP
Tools
No. 41-DN No. 45RE
Seals and
PN10/16 PN10/PN16
Gaskets,
O-Rings
11 G-103 REV A
Index
Intro
Original Groove System (OGS)
Fittings — Reducers
OGS
Download publication 07.01 for complete information
on original grooved end fittings for carbon steel pipe
AGS
• Standard fitting pressure ratings conform
to ratings of installed coupling
VBSP
• All fittings supplied with grooves or shoulders
for fast installation
Hole Cut
• Fittings available from ¾ – 24" | DN20 – DN600
• For AGS sizes 14 – 60" | DN350 – DN1500,
Expansion
download publication 20.05 for complete
Joints
information
Certifications/Listings:
Plain End
Download publication 10.01 for complete information
Stainless
Steel
Reducers Other Fitting Systems
Download publication 07.02 for long radius steel
Copper
elbows (3D, 5D, and 6D)
Download publication 07.03 for EndSeal™ Extra
Shouldered
No. 50 No. 51 Heavy (ES) fittings
Steel
Concentric Eccentric
Reducer Reducer Download publication 07.04 for fabricated steel fittings
(segmentally welded and full flow)
AWWA
Download publication 07.06 for shouldered steel fittings
Performance
Download publication 07.07 for XL fittings
High
Download publication 14.04 for plain end fittings
Balancing
No. 52 Download publication 17.16 for stainless steel fittings
Hydronic
Small Threaded
Download publication 17.32 for StrengThin™ fittings
Reducer
Download publication 18.11 for Type 316 Vic-Press™ fittings
HDPE
Download publication 18.12 for Type 304 Vic-Press fittings
Aquamine™
Download publication 20.05 for fittings
TM
PVC
Download publication 21.03 for aluminum fittings
No. XL100 No. XL110 XL Fittings for Download publication 22.04 for CTS copper fittings, Grooved
PVC
1½D 1½D Rubber Lined 22.10 for Australian Standard copper fittings,
90° Elbow 45° Elbow Services 22.11 for EN1057 standard copper fittings
See pg. 28
for information. Download publication 22.15 for CTS copper
FRP
Installation-Ready™ fittings
Download publication 23.05 for AWWA fittings
Tools
3D 3D
Gaskets,
O-Rings
90° Elbow 45° Elbow Download publication 31.04 for StrengThin 100 fittings
Download publication 50.01 for Aquamine™ fittings
Design
Data
STYLE 150
AGS
•
• For additional types of expansion joints, see pg. 45
Expansion
Joints
Plain End
Stainless
Steel
Copper
Shouldered
Steel
AWWA
Expansion Joint
STYLE 155
Performance
High
•
publication 20.12 for information on Style W155
• For additional types of expansion joints, see pg. 45
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
13 G-103 REV A
Index
Intro
Original Groove System (OGS)
Vic™-300 MasterSeal™
OGS
Butterfly Valve
SERIES 761
AGS
Download publication 08.20 for complete information
VBSP
• Designed for bi-directional, dead end
services to full working pressure
Hole Cut
• Available without handle, with gear operator,
with lever lock handle and memory stop or
with 10-position handle and memory stop
Expansion
Sizes from 2 – 12" | DN50 – DN300
Joints
•
• Pressures up to 300 psi | 2068 kPa | 21 bar
Plain End
• For AGS sizes 14 – 24" | DN350 – DN600,
download publication 20.06 for information
on Series W761
Stainless
Steel
• For AGS sizes 26 – 48" | DN650 – DN1200,
download publication 20.07 for information
on Series W709
Copper
Certifications/Listings:
Shouldered
Steel
Download publication 10.01 for complete information
Download publication 02.06 for potable water approvals
AWWA
Butterfly Valve
SERIES 700
Performance
High
Download publication 08.05 for complete information
Balancing
Hydronic
• Two piece stem permits narrow disc design
for low pressure drop performance
• Supplied standard with aluminum bronze disc,
HDPE
316 stainless steel optional
• Sizes from 1½ – 6" | DN40 – DN150
Aquamine™
Pressures up to 200 psi | 1379 kPa | 14 bar
PVC
•
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Certifications/Listings:
Design
Data
Vic-Check Valve
OGS
SERIES 716H
AGS
• Pressures up to 365 psi | 2517 kPa | 25 bar
• For AGS sizes 14 – 24" | DN350 – DN600, download
Expansion
Joints
Vic-Check Valve
SERIES 716
Copper
• Pressures up to 300 psi | 2068 kPa | 21 bar
• For AGS sizes 14 – 24" | DN350 – DN600, download
Performance
Certifications/Listings:
Balancing
Hydronic
SERIES 779
PVC
• Pressures up to 300 psi | 2068 kPa | 21 bar
Tools
Seals and
Gaskets,
O-Rings
Certifications/Listings:
Design
Data
15 G-103 REV A
Index
Intro
Original Groove System (OGS)
OGS
SERIES 712
AGS
Download publication 08.11 for complete information
VBSP
outlet ports
• Sizes from 2 – 4" | DN50 – DN100
Hole Cut
• Pressures up to 300 psi | 2068 kPa | 21 bar
• For more information on swing check valves
Expansion
Joints
for stainless steel, see pg. 60
Certifications/Listings: • Regional availability, contact Victaulic for details
Plain End
Download publication 10.01 for complete information
Stainless
Steel
Swing Check Valve
SERIES 713
Copper
Download publication 08.54 for complete information
Shouldered
• High pressure check valve designed for use
Steel
with Victaulic grooved fittings and couplings
for fast installation on inlet and outlet ports
Sizes from 2 – 4" | DN50 – DN100
AWWA
•
• Pressures up to 1000 psi | 6895 kPa | 69 bar
for 2" | DN50 and 750 psi | 5171 kPa | 52 bar
Performance
High
for 2½ – 4" | DN65 – DN100
• Regional availability, contact Victaulic for details
Certifications/Listings:
Balancing
Hydronic
Download publication 10.01 for complete information
HDPE
Vic-Ball Valve
Aquamine™
SERIES 721
•
Tools
Seals and
Gaskets,
O-Rings
Design
Data
Vic-Ball Valve
OGS
SERIES 726
AGS
Certifications/Listings:
Plain End
Ball Valve
SERIES 727
Copper
ball valve
• Up to 1/3 better flow than competitive
AWWA
SERIES 722
PVC
• Pressures up to 600 psi | 4137 kPa | 41 bar
Tools
Seals and
Gaskets,
O-Rings
Certifications/Listings:
Design
Data
17 G-103 REV A
Index
Intro
Original Groove System (OGS)
Vic-Plug Valve
OGS
SERIES 377
AGS
Download publication 08.12 for complete information
VBSP
• Available without handle, with lever operator
or gear operator
Hole Cut
• Sizes from 3 – 12" | DN80 – DN300
• Pressures up to 175 psi | 1207 kPa | 12 bar
Expansion
Joints
Plain End
Stainless
Steel
Triple Service Valve Assemblies
BUTTERFLY/CHECK VALVE
Copper
Download publication 08.09 for complete information
Shouldered
• Assembles with Style 107N rigid couplings
Steel
or Style 177N flexible couplings
• Sizes from 2½ – 12" | DN65 – DN300
AWWA
• Pressures up to 300 psi | 2068 kPa | 21 bar
• For AGS sizes 14 – 24" | DN350 – DN600, download
Performance
publication 20.18 for more information
High
Balancing
Hydronic
HDPE
Triple Service Valve Assemblies
Aquamine™
PLUG/CHECK VALVE
• Pressures up to 175 psi | 1207 kPa | 12 bar
Tools
Seals and
Gaskets,
O-Rings
Design
Data
STYLE DLY
AGS
Pressures up to 300 psi | 2068 kPa | 21 bar
Joints
•
Plain End
Stainless
Steel
abrasive materials
• All wear parts can be replaced in-line without
AWWA
SERIES 771M
PVC
•
• Pressures up to 250 psi | 1724 kPa | 17 bar
Tools
Seals and
Gaskets,
O-Rings
Certifications/Listings:
Design
19 G-103 REV A
Index
Intro
Original Groove System (OGS)
OGS
SERIES 723
AGS
Download publication 08.13 for complete information
VBSP
90° left or right
• Available without handle, with lever operator
Hole Cut
or gear operator
• Available in 2" | DN50
Expansion
Pressures up to 600 psi | 4137 kPa | 41 bar
Joints
•
Plain End
Stainless
Steel
Diverter Valve
SERIES 725
Copper
Download publication 08.40 for complete information
Shouldered
• Provides 180° service on sand and backfill paste
Steel
lines for increased efficiency and reduced downtime
• Available in 6" | DN150
AWWA
• Pressures up to 1000 psi | 6895 kPa | 69 bar
• Regional availability, contact Victaulic for details
Performance
High
Certifications/Listings:
Balancing
Hydronic
Download publication 10.01 for complete information
HDPE
Aquamine™
PVC
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
•
• Regional availability, contact Victaulic for details
HDPE
O-Rings
21 G-103 REV A
Index
Intro
Original Groove System (OGS)
OGS
BERMAD SERIES A30 | VICTAULIC SERIES 9A3
AGS
Download publication Engineering A30
for complete information
VBSP
of air bubbles from pressurized pipe lines
• Body material: Glass reinforced nylon
Hole Cut
• Sizes from ¾ – 1" | DN20 – DN25
• Pressures up to 230 psi | 1586 kPa | 16 bar
Expansion
Joints
• Temperatures up to 140°F | 60°C
• Regional availability, contact Victaulic for details
Plain End
Stainless
Steel
Automatic Air Release Valve
BERMAD SERIES A71 | VICTAULIC SERIES 9A7
Copper
Download publication Engineering A71
for complete information
Shouldered
Steel
• Automatic air release valves allow efficient release
of air bubbles from pressurized pipe lines
AWWA
• Body material: Type 316 stainless steel
• Sizes from ¾ – 1" | DN20 – DN25
Performance
• Pressures up to 350 psi | 2413 kPa | 24 bar
High
• Temperatures up to 140°F | 60°C
Balancing
Regional availability, contact Victaulic for details
Hydronic
•
HDPE
Combination Air Valve
Aquamine™
BERMAD SERIES C30 | VICTAULIC SERIES 9C3
(air/vacuum valve)
• Body material: Glass reinforced nylon
Sizes from 2 – 4" | DN50 – DN100
Expansion
•
Joints
(air/vacuum valve)
• Body material: Ductile iron (standard)
Performance
High
O-Rings
Design
Data
23 G-103 REV A
Index
Intro
Original Groove System (OGS)
Suction Diffuser
OGS
SERIES 731-D
AGS
Download publication 09.20 for complete information
VBSP
while still protecting the pump against cavitation
• ANSI Class 150, Australian Standard Table E,
Hole Cut
PN10/16, GB, and JIS 10K
• Sizes from 3 – 12" | DN80 – DN300
Expansion
Pressures up to 300 psi | 2068 kPa | 21 bar
Joints
•
Certifications/Listings: • For AGS sizes 14 – 24" | DN350 – DN600, download
publication 20.20 for information on Series W731-D
Plain End
Download publication 10.01 for complete information
Stainless
Steel
Vic-Strainer Tee Type
SERIES 730
Copper
Download publication 09.02 for complete information
Shouldered
• Lighter than flanged Y-type strainers and provides
Steel
straight-through flow for lower pressure drop
• Sizes from 1½ – 12" | DN40 – DN300
AWWA
• Pressures up to 750 psi | 5171 kPa | 52 bar
• For AGS sizes 14 – 24" | DN350 – DN600, download
Performance
publication 20.11 for information on Series W730
High
Certifications/Listings:
Balancing
Hydronic
Download publication 10.01 for complete information
HDPE
Vic-Strainer Wye Type
Aquamine™
SERIES 732
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Available in limited sizes for air handling units
Tools
Certifications/Listings:
Design
Data
Pump Drop
SERIES 380
AGS
SERIES 381
Shouldered
•
High
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Regional availability, contact Victaulic for details
Balancing
Hydronic
HDPE
SERIES 382
Grooved
• Pressures up to 300 psi | 2068 kPa | 21 bar
Seals and
Gaskets,
25 G-103 REV A
Index
Intro
Original Groove System (OGS)
Vic-Header
OGS
SERIES 26
AGS
Download publication 07.11 for complete information
VBSP
options for length, pipe schedule, number and
location of outlets, straight pipe or reduction,
Hole Cut
coatings and more
• Available with OGS and AGS groove ends
Sizes from ¾ – 24" | DN20 – DN600
Expansion
•
Joints
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Regional availability, contact Victaulic for details
Plain End
Stainless
Steel
EndSeal™ System
COUPLING: STYLE HP-70ES; FITTINGS: NO. 62ES,
Copper
NO. 63ES, NO. 64ES, NO. 35ES, NO. 22ES
Shouldered
coupling Download publication 07.03 for the ES fittings
Steel
• For plastic coated pipe or high pressure rigid systems
AWWA
• Schedule 80 wall thickness for use with
HP-70ES couplings
Coupling sizes from 2 – 12" | DN50 – DN300 and
Performance
•
High
Fitting sizes from 2 – 6" | DN50 – DN150
• Pressures up to 2500 psi | 17237 kPa | 172 bar
Balancing
Hydronic
• Regional availability, contact Victaulic for details
HDPE
Aquamine™
PVC
No. 62ES No. 63ES No. 64ES Grooved
PVC
No. 35ES No. 22ES
Seals and
Grooved Coupling
STYLE 808
AGS
•
• Pressures up to 4000 psi | 27579 kPa | 275 bar
Expansion
Certifications/Listings:
Plain End
•
High
O-Rings
Design
Data
27 G-103 REV A
Index
Intro
Original Groove System (OGS)
OGS
Rubber-lined Abrasive Services
AGS
Download publication 07.07 for complete information
VBSP
lining resulting in up to three times the service life
when compared to standard rubber lined fittings
• Sizes from 3 – 12" | DN80 – DN300
Hole Cut
• Comes with Style XL77 flexible couplings for
pipe-to-fitting and Style XL79 flexible couplings
Expansion
for fitting-to-fitting connections
Joints
Plain End
Stainless
Steel
Copper
No. XL100 No. XL110
Shouldered
1½D 1½D
Steel
90° Elbow 45° Elbow
AWWA
Performance
High
No. XL100 No. XL110
3D 3D
Balancing
Hydronic
90° Elbow 45° Elbow
HDPE
Aquamine™
PVC
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
AGS Stainless Steel Rigid Coupling (Style W89) 31 AGS Vic-Check Double Disc Valve
(Style W715) 35
AWWA
(Style W07) 32
Strainers and Diffusers page
Balancing
Hydronic
Adapters page
AGS Vic-Strainer Wye Type (Series W732) 36
Aquamine™
Headers page
Grooved
PVC
Fittings page
Vic-Header (No. 26) 26
FRP
AGS Fittings 33
O-Rings
29 G-103 REV A
Index
Intro
Advanced Groove System
TM
OGS
AGS
VBSP
Hole Cut
Expansion
Joints
Plain End
Stainless
Steel
Advanced Groove System
TM
HOUSING
2-piece design up Wider housing profile for
to 60" | DN1500
Copper
greater end load capability.
for faster installation
First flat-pad rigid
Shouldered
coupling design that
Steel
installs metal-to-metal
for visual inspection.
AWWA
Performance
High
Balancing
Hydronic
GASKET GROOVE
The Flush-Seal™ gasket delivers more Patented coupling locks
HDPE
contact area for superior sealing. into a deeper, wider,
wedge shaped groove
for extremely strong,
Aquamine™
dependable joints.
PVC
HOUSING
GASKET GROOVE
Design
Data
STYLE W07
AGS
•
• For original groove sizes 1 – 12" | DN25 – DN300
(Style 07), download publication 06.02;
Expansion
Joints
• Pressures up to 350 psi | 2413 kPa | 24 bar
• For original groove sizes ¾ – 24" | DN20 – DN600
Performance
STYLE W89
PVC
• Pressures up to 300 psi | 2068 kPa | 21 bar
• For original groove sizes 2 – 12" | DN50 – DN300,
Tools
O-Rings
Design
Data
31 G-103 REV A
Index
Intro
Advanced Groove System
TM
AGS Vic-Ring
OGS
Rigid Coupling System
STYLE W07
AGS
Download publication 16.11 for complete information
VBSP
• Coupling installs on the supplied ring to maintain full
pipe wall thickness on abrasive systems
Sizes from 14 – 50" | DN350 – DN1250
Hole Cut
•
• Pressures up to 350 psi | 2413 kPa | 24 bar
Expansion
• For OGS Vic-Ring products, see pg. 7
Joints
• Regional availability, contact Victaulic for details
Plain End
Stainless
Steel
AGS Vic-Ring
Flexible Coupling System
Copper
STYLE W77
Shouldered
Download publication 16.12 for complete information
Steel
• Coupling installs on the supplied ring to maintain full
pipe wall thickness on abrasive systems
AWWA
• Sizes from 14 – 72" | DN350 – DN1800
• Pressures up to 350 psi | 2413 kPa | 24 bar
Performance
High
• For OGS Vic-Ring products, see pg. 7
• Regional availability, contact Victaulic for details
Balancing
Hydronic
HDPE
AGS Vic-Flange Adapter
Aquamine™
STYLE W741
AGS Fittings
OGS
AGS Fittings
Copper
No.WAULIC
No.WAULIC
11
11
VICT
VICT
Shouldered
90° Elbow 45° Elbow 22½° Elbow 11¼° Elbow 90° 1½ D Long 45° 1½ D Long
Radius Elbow Radius Elbow
AWWA
Performance
VICTAULIC
VICTAULIC
No.W30-R
No.W35
VICTAULIC
No.W30
High
33 LIC
o.W U
N TA
VIC
VICTAULIC
VICTAULIC No.W25
No.W20
Balancing
Tee Cross True Wye Reducing Tee 45° Lateral 45° Reducing
Lateral
HDPE
Aquamine™
PVC
VICTAULIC
No.W60
VICTAULIC VICTAULIC
Tools
No.W50 No.W51
O-Rings
33 G-103 REV A
Index
Intro
Advanced Groove System
TM
OGS
Download publication 17.05 for complete information
AGS
• Grooved ends eliminate pipe end preparation
for the fittings
• Sizes from 14 – 24" | DN350 – DN600
VBSP
• Fitting pressure ratings are equivalent to the
Victaulic AGS coupling used to install them
Hole Cut
• Offering includes elbows, tees, adapter nipples,
caps, eccentric and concentric reducers
Expansion
Joints
Plain End
Stainless
Steel
AGS Expansion Joint
STYLE W155
Copper
Download publication 20.12 for complete information
Shouldered
• Combination of Style W77 couplings and
Steel
short nipples, joined in tandem to provide
increased expansion
Sizes from 14 – 24" | DN350 – DN600
AWWA
•
• For original groove sizes ¾ – 12" | DN20 – DN300,
Performance
download publication 09.05 for information
High
on Style 155
Balancing
Hydronic
HDPE
AGS Vic™-300 Butterfly Valve
Aquamine™
SERIES W761
• Pressures up to 300 psi | 2068 kPa | 21 bar
• For original groove sizes 2 – 12" | DN50 – DN300,
Tools
Certifications/Listings:
Design
Data
SERIES W709
AGS
•
Expansion
Joints
Certifications/Listings:
Plain End
flow up positions
• Sizes from 14 – 24" | DN350 – DN600
Performance
• Pressures up to 230 psi | 1586 kPa | 16 bar
High
mechanical memory
PVC
O-Rings
Design
Data
35 G-103 REV A
Index
Intro
Advanced Groove System
TM
OGS
SERIES W731-D
AGS
Download publication 20.20 for complete information
VBSP
saving valuable space in the mechanical room
while still protecting the pump against cavitation
• Flanges may be machined to match most global
Hole Cut
(ANSI, DIN, GB, JIS, and AS-E) flange bolt hole
patterns within the diffuser pressure rating
Expansion
• Sizes from 14 – 24" | DN350 – DN600
Joints
• Pressures up to 300 psi | 2068 kPa | 21 bar
Certifications/Listings:
For original groove sizes 3 – 12" | DN80 – DN300,
Plain End
•
download publication 09.20 for information
Download publication 10.01 for complete information on Series 731-D
Stainless
Steel
AGS Vic-Strainer Tee Type
SERIES W730
Copper
Download publication 20.11 for complete information
Shouldered
• Lighter than flanged Y-type strainers and provides
Steel
straight-through flow for lower pressure drop
• Sizes from 14 – 24" | DN350 – DN600
AWWA
• Pressures up to 300 psi | 2068 kPa | 21 bar
• For original groove sizes 1½ – 12" | DN40 – DN300,
Performance
download publication 09.02 for information
High
on Series 730
Balancing
Hydronic
HDPE
AGS Vic-Strainer Wye Type
Aquamine™
SERIES W732
• Pressures up to 300 psi | 2068 kPa | 21 bar
• For original groove sizes 2 – 12" | DN50 – DN300,
Tools
Certifications/Listings:
Design
Data
when needed.
Plain End
Stainless
Steel
Non-Restrained Flexible Coupling for Fiberglass Restrained Flexible Couplings for Dynamic Joint
Copper
Reinforced Plastic Pipe (Style 229S) 108 Deflection on Carbon Steel Pipe (Style 233) 39
for Carbon Steel Pipe (Style 230) 38 Deflection on Stainless Steel Pipe (Style 233S) 39
for Stainless Steel Pipe (Style 230S) 38 for Carbon Steel Pipe (Style 234) 40
for Carbon Steel Pipe (Style 231) 47 for Stainless Steel Pipe (Style 234S) 40
Restrained Coupling
Aquamine™
PVC
O-Rings
Design
Data
37 G-103 REV A
Index
Intro
Victaulic® Bolted Split-Sleeve Products (VBSP)
OGS
for Carbon Steel Pipe
STYLE 230
AGS
Download publication 60.01 for complete information
VBSP
• Non-restrained flexible pipe joint for water and
wastewater pipelines
Sizes from 8 – 144" | DN200 – DN3600
Hole Cut
•
• Pressures up to 400 psi | 2758 kPa | 28 bar
Up to ½" | 13 mm intermittent axial movement
Expansion
•
Joints
• Satisfies the requirements of AWWA C227
• Regional availability, contact Victaulic for details
Plain End
Stainless
Steel
Non-Restrained Flexible Coupling
for Stainless Steel Pipe
Copper
STYLE 230S
Shouldered
Download publication 60.02 for complete information
Steel
• Non-restrained flexible pipe joint used where
corrosion resistance is required
AWWA
• Sizes from 3 – 96" | DN80 – DN2400
• Pressures up to 300 psi | 2068 kPa | 21 bar
Performance
High
• Up to ½" | 13 mm intermittent axial movement
• Satisfies the requirements of AWWA C227
Balancing
Hydronic
• Regional availability, contact Victaulic for details
HDPE
Restrained Flexible Coupling
for Carbon Steel Pipe
Aquamine™
PVC
STYLE 232
Grooved
PVC
•
• Pressures up to 300 psi | 2068 kPa | 21 bar
Expansion
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Satisfies the requirements of AWWA C227
Balancing
Hydronic
O-Rings
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Satisfies the requirements of AWWA C227
Design
39 G-103 REV A
Index
Intro
Victaulic® Bolted Split-Sleeve Products (VBSP)
OGS
Coupling for Carbon Steel Pipe
STYLE 234
AGS
Download publication 60.09 for complete information
VBSP
• Sizes from 8 – 120" | DN200 – DN3000
• Pressures up to 300 psi | 2068 kPa | 21 bar
Hole Cut
• Designed for use on water transmission,
force mains and penstock lines
Expansion
• Regional availability, contact Victaulic for details
Joints
Plain End
Stainless
Steel
Restrained Flexible Single-Gasket
Coupling for Stainless Steel Pipe
Copper
STYLE 234S
Shouldered
Download publication 60.10 for complete information
Steel
• Sizes from 8 – 60" | DN200 – DN1500
• Pressures up to 200 psi | 1379 kPa | 14 bar
AWWA
• Ideal for field joint connections requiring flexibility
and thrust restraint
Performance
High
• Regional availability, contact Victaulic for details
Balancing
Hydronic
HDPE
Aquamine™
PVC
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
Mechanical-T Bolted Branch Outlet and Vic-Tap Hole Cutting Tools 131 – 132
Copper
Mechanical-T Bolted Branch Outlet
Shouldered
Steel
Mechanical-T Bolted Branch Outlet and
AWWA
Vic-O-Well Strapless Thermometer Outlet
(Style 924) 43
HDPE
Aquamine™
O-Rings
Design
Data
41 G-103 REV A
Index
Intro
Hole Cut System
OGS
and Cross Assemblies
STYLE 920/920N
AGS
Download publication 11.02 for complete information
VBSP
• Provides a direct branch connection at any
location where a hole can be cut in the pipe
Hole Cut
• Available as a tee or cross outlet with female
threaded or grooved ends
• Sizes from 2 – 8" | DN50 – DN200
Expansion
Joints
Certifications/Listings: • Pressures up to 500 psi | 3447 kPa | 34 bar
Plain End
920: 920N:
104-1a/11 104-1a/26
Stainless
Steel
Outlet Coupling
STYLE 72
Copper
Download publication 06.10 for complete information
Shouldered
• Joining device to provide an integral reducing outlet
Steel
• Sizes from 1½ – 6" | DN40 – DN150
• Pressures up to 500 psi | 3447 kPa | 34 bar
AWWA
Performance
High
Certifications/Listings:
Balancing
Hydronic
Download publication 10.01 for complete information
HDPE
Aquamine™
PVC
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
STYLE 923
AGS
•
Expansion
Joints
Certifications/Listings:
Plain End
Vic-O-Well Strapless
Thermometer Outlet
Copper
STYLE 924
Shouldered
mechanical outlet
• Sizes from 4 – 10" | DN100 – DN250
Performance
• Pressures up to 300 psi | 2068 kPa | 21 bar
High
Balancing
Hydronic
HDPE
STYLE 926
PVC
O-Rings
43 G-103 REV A
Index
Gaskets,
Expansion Stainless Shouldered High Hydronic Aquamine™ Grooved Seals and Design
Intro OGS AGS VBSP Hole Cut Joints Plain End Steel Copper Steel AWWA Performance Balancing HDPE PVC PVC FRP Tools O-Rings Data Index
44 G-103 REV A
Hole Cut System
victaulic.com
Intro
Expansion Joints
(Style 240S) 49
PVC
O-Rings
Design
Data
45 G-103 REV A
Index
Intro
Expansion Joints
OGS
STYLE 150
AGS
Download publication 09.04 for complete information
VBSP
• Sizes from 2 – 6" | DN50 – DN150
Pressures up to 350 psi | 2413 kPa | 24 bar
Hole Cut
•
Expansion
Joints
Plain End
Stainless
Steel
Expansion Joint
STYLE 155
Copper
Download publication 09.05 for complete information
Shouldered
• Combination of couplings and short nipples, joined
Steel
in tandem to provide increased expansion
• Style 155 grooved expansion joints are rated to
AWWA
the working pressure of the coupling used
• Sizes from ¾ – 12" | DN20 – DN300
Performance
• For AGS sizes 14 – 24" | DN350 – DN600, download
High
publication 20.12 for information on Style W155
Balancing
Hydronic
HDPE
StrengThin™ 100 Expansion Joint
Aquamine™
SERIES E155
STYLE W155
AGS
increased expansion
• Sizes from 14 – 24" | DN350 – DN600
Hole Cut
on Style 155
Joints
Plain End
Stainless
Steel
STYLE 231
Shouldered
STYLE 231S
Grooved
PVC
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Satisfies the requirements of AWWA C227
Seals and
Gaskets,
O-Rings
47 G-103 REV A
Index
Intro
Expansion Joints
OGS
STYLE 152A
AGS
Download publication 09.15 for complete information
VBSP
• Sizes from 10 – 30" | DN250 – DN750
Pressures up to 50 psi | 345 kPa | 3 bar
Hole Cut
•
• Regional availability, contact Victaulic for details
Expansion
Joints
Plain End
Stainless
Steel
Copper
HOUSING
Precision formed ductile iron, one-
Shouldered
piece construction. Polyphenylene
Steel
sulfide blend (PPS) heat fused coating
allows for easy deflection with no
transmission of reaction loads.
AWWA
Performance
High
Balancing
Hydronic
VIC-RINGS
Two carbon steel rings welded to hold
gasket in place to expertly seal joint,
resulting in zero leakage.
HDPE
GASKET
Aquamine™
Reliable silicone seals designed
PVC
for dry heat. Rated from -30º to
+350º F | -34º to +177º C.
Grooved
PVC
FRP
bend or damage.
Design
Data
Expansion Joint
STYLE 240S
AGS
•
Joints
O-Rings
Design
Data
49 G-103 REV A
Index
Intro
Expansion Joints
Expansion Barrel
OGS
STYLE W256
AGS
Download publication 09.16 for complete information
VBSP
• Provides up to 42" | 1067 mm of in-line movement
• Pressures up to 300 psi | 2068 kPa | 21 bar
Hole Cut
• Designed for water and/or slurry services
• Regional availability, contact Victaulic for details
Expansion
Joints
Plain End
Stainless
Steel
Copper
Shouldered
Steel
AWWA
Performance
High
Balancing
Hydronic
HDPE
Aquamine™
PVC
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
STYLE 99
PVC
O-Rings
Certifications/Listings:
Design
Data
51 G-103 REV A
Index
Intro
Plain End System for Carbon Steel
Fittings
OGS
Download publication 14.04 for complete information
AGS
• Provides change of direction to plain end
piping systems
• Ready to install fitting
VBSP
• Compatible with Style 99 Roust-A-Bout coupling
Hole Cut
• Regional availability, contact Victaulic for details
Expansion
Joints
Plain End
Stainless
Steel
Copper
Shouldered
No. 10P No. 11P No. 100P No. 110P No. 20P No. 35P
Steel
90° Elbow 45° Elbow 90° Long 45° Long Tee Cross
Radius Elbow Radius Elbow
AWWA
Performance
High
Balancing
No. 33P No. 61P No. 25P No. 30P
Hydronic
True Wye Steel Bull Plug Reducing Tee 45° Lateral
HDPE
Aquamine™
PVC
No. 53P No. 40P No. 42P No. 43P Grooved
PVC
Certifications/Listings:
Design
Data
The Victaulic® grooved system for stainless steel pipe In addition to the products listed below, the following
OGS
offers a fast, easy and reliable method for joining Victaulic products may also be used on stainless steel
ANSI and ISO wall thickness stainless steel pipe. pipe. Refer to the individual product publications for
For light wall and thin wall stainless steel pipe, specially additional information.
AGS
designed RX rolls are used to create the proper groove • Style 07 Rigid Coupling
profile required for installing Victaulic products
• Style HP-70 Rigid Coupling
VBSP
Type 316 Rigid Coupling (Style 489) 55 Type 316 Vic-Flange Adapter (Style 441) 57
Copper
Coupling (Style 475) 56
High
AGS Stainless Steel Rigid Coupling (Style W89) 31 ANSI Schedule 40S Fittings 59
HDPE
AGS Fittings 34
Aquamine™
PVC
Grooved
PVC
FRP
O-Rings
53 G-103 REV A
Index
Intro
Stainless Steel System
OGS
AGS
VBSP
Hole Cut
Expansion
Joints
Plain End
Stainless
Steel
Valves page StrengThin™ System page
Copper
Butterfly Valve (Series 461) 60 (Style D08) 65
Shouldered
Steel
Swing Check Valve (Series 712S) 60
AWWA
Double Disc Check Valve (Series 415) 61 StrengThin 100 System page
Performance
Vic-Ball Valve (Series 726S and 726D) 61 StrengThin 100 Rigid Coupling (Style E497) 66
High
Three-Piece Vic-Press Ball Valve StrengThin 100 Fittings 66
(Series P569 Groove × Groove) 62
Balancing
Hydronic
StrengThin 100 Butterfly Valve (Series E461) 67
Plug Valve (Series 465 and Series 466) 62
trengThin 100 Swing Check Valve
S
HDPE
(Series E416) 67
Aquamine™
Vic-Press page
PVC
StrengThin 100 Expansion Joint (Series E155) 67
STYLE 489
AGS
rigidity is required
• Sizes from 1½ – 12" | DN40 – DN300
Hole Cut
• Pressures up to 600 psi | 4137 kPa | 41 bar
• For the duplex stainless steel coupling,
Expansion
Joints
WaterMark
Rigid Coupling
STYLE 89
Copper
• Pressures up to 1200 psi | 8274 kPa | 83 bar
High
WaterMark
STYLE 489DX
PVC
O-Rings
Design
Data
55 G-103 REV A
Index
Intro
Stainless Steel System
OGS
STYLE 77S
AGS
Download publication 17.03 for complete information
VBSP
• Sizes from 8 – 18" | DN200 – DN450
Pressures up to 300 psi | 2068 kPa | 21 bar
Hole Cut
•
• For the duplex coupling in sizes
¾ – 6" | DN20 – DN150, download publication
Expansion
Joints
17.20 for information on Style 77DX
Plain End
Stainless
Steel
Type 316 Lightweight
Flexible Coupling
Copper
STYLE 475
Shouldered
Download publication 17.14 for complete information
Steel
• Designed to provide a durable mechanical joint
for grooved end stainless steel piping systems
AWWA
• Sizes from 1 – 4" | DN25 – DN100
• Pressures up to 500 psi | 3447 kPa | 34 bar
Performance
High
• For the duplex coupling, download publication
17.34 for information on Style 475DX
Certifications/Listings:
Balancing
Hydronic
WaterMark
HDPE
Duplex Flexible Coupling
Aquamine™
STYLE 77DX
• Pressures up to 1200 psi | 8274 kPa | 83 bar
• Optional super duplex stainless steel housing
Tools
Certifications/Listings: on Style 77S
Design
WaterMark
Data
STYLE 475DX
AGS
• Pressures up to 500 psi | 3447 kPa | 34 bar
• Optional super duplex stainless steel housing
Expansion
Joints
Vic-Flange Adapter
STYLE 441
Copper
STYLE 422
Grooved
PVC
O-Rings
• Pressures up to 300 psi | 2068 kPa | 21 bar
Certifications/Listings:
Design
Data
57 G-103 REV A
Index
Intro
Stainless Steel System
OGS
Download publication 17.16 for complete information
AGS
• Grooved ends eliminate pipe end preparation
for the fittings
• Sizes from ¾ – 12" | DN20 – DN300
VBSP
• Available in Type 304L or 316L
Hole Cut
• Download publication 17.27 for flange bolt hole
pattern options
Expansion
Joints
Certifications/Listings:
Plain End
WaterMark
Stainless
Steel
Copper
Shouldered
No. 410 SS No. 411 SS No. 412 SS No. 413 SS No. 420 SS
Steel
90º Elbow 45º Elbow 22½° Elbow 11¼° Elbow Tee
AWWA
Performance
High
Balancing
No. 425 SS No. 430 SS No. 433 SS No. 435 SS
Hydronic
Grooved Branch 45º Lateral True Wye Cross
Reducing Tee
HDPE
Aquamine™
PVC
No. 442 SS No. 443 SS No. 450 SS No. 451 SS No. 460 SS Grooved
PVC
No. 445F No. 445R
Seals and
Certifications/Listings:
Download publication 02.06 for potable water approvals
Stainless
Steel
Copper
Shouldered
O-Rings
Design
Data
59 G-103 REV A
Index
Intro
Stainless Steel System
Vic™-300 MasterSeal™
OGS
Stainless Steel Butterfly Valve
SERIES 461
AGS
Download publication 17.40 for complete information
VBSP
• Designed for bi-directional, dead end services
to full working pressure
Hole Cut
• Available without handle, with gear operator,
with lever lock handle and memory stop or
with 10-position handle and memory stop
Expansion
Sizes from 2 – 8" | DN50 – DN200
Joints
•
Certifications/Listings:
• Pressures up to 300 psi | 2068 kPa | 21 bar
Plain End
Download publication 10.01 for complete information
Download publication 02.06 for potable water approvals
Stainless
Steel
Swing Check Valve
SERIES 416
Copper
Download publication 17.41 for complete information
Shouldered
• Resilient-seat spring return swing check valve
Steel
designed for horizontal or vertical (upward flow)
applications
Sizes from 2 – 12" | DN50 – DN300
AWWA
•
• Pressures up to 300 psi | 2068 kPa | 21 bar
Performance
High
Certifications/Listings:
Balancing
Hydronic
Download publication 10.01 for complete information
Download publication 02.06 for potable water approvals
HDPE
Swing Check Valve
Aquamine™
SERIES 712S
Certifications/Listings:
Design
Data
SERIES 415
AGS
•
Expansion
Joints
Plain End
Certifications/Listings:
Download publication 02.06 for potable water approvals
Stainless
Steel
Vic-Ball Valve
SERIES 726S
Copper
• Pressures up to 1000 psi | 6895 kPa | 69 bar
Performance
High
Balancing
Hydronic
HDPE
Vic-Ball Valve
Aquamine™
SERIES 726D
PVC
• Pressures up to 1200 psi | 8274 kPa | 83 bar
Tools
Seals and
Gaskets,
O-Rings
Certifications/Listings:
Design
Data
61 G-103 REV A
Index
Intro
Stainless Steel System
OGS
SERIES P569
AGS
Download publication 18.14 for complete information
VBSP
• Sizes from ½ – 2" | DN15 – DN50
Pressures up to 400 psi | 2758 kPa | 28 bar
Hole Cut
•
• For the entire Vic-Press line of products,
see pgs. 63 and 64
Expansion
Joints
Certifications/Listings:
Plain End
Download publication 10.01 for complete information
Download publication 02.06 for potable water approvals
Stainless
Steel
Plug Valve
SERIES 465
Copper
Download publication 17.36 for complete information
Shouldered
• Typically used in reverse osmosis desalination
Steel
plants for on/off and control services
• Available without operator or with manual,
AWWA
pneumatic, hydraulic and electric actuators
• Features grooved ends for installation in either
Performance
StrengThin™ Systems or OGS
High
• Sizes from 2 – 20" | DN50 – DN500
Certifications/Listings:
• Pressures up to 1450 psi | 9997 kPa | 100 bar
Balancing
Hydronic
Download publication 10.01 for complete information
Download publication 02.06 for potable water approvals
HDPE
Plug Valve
Aquamine™
SERIES 466
• Pressures up to 1200 psi | 8274 kPa | 83 bar
Seals and
Gaskets,
O-Rings
Certifications/Listings:
Design
Data
Certifications/Listings:
Plain End
Connection Key
P Press
F Female Thread
Copper
M Male Thread
T Plain End
Shouldered
L Flanged
Style P597 Style P586 Style P542 Style P591 Style P543
Steel
G Grooved
Standard Short Tangent 90º Street 45º Elbow 45º Street
Coupling 90º Elbow Elbow (P × P) Elbow
AWWA
Style P592 Style P588 Style P593 Style P596 Style P599 Style P561
Hydronic
Tee Tee with Tee with Male Threaded Female Weld Adapter
(P × P × P) Threaded Reducing Adapter Threaded (P × T)
Branch Branch (P × M) Adapter
HDPE
Style P584 Style P595 Style P565 Style P587 Style P594 Style P540
Grooved
PVC
O-Rings
63 G-103 REV A
Index
Intro
Stainless Steel System
OGS
Stainless Steel Type 316
AGS
Download publication 18.11 for complete information
VBSP
Schedule 5S or 10S Type 316/316L stainless steel
• Meet ASME requirements for ANSI Class 150 systems
Hole Cut
• Sizes from ½ – 2" | DN15 – DN50
• Pressures up to 500 psi | 3447 kPa | 34 bar
Expansion
Joints
Certifications/Listings:
Plain End
WaterMark
Stainless
Steel
Connection Key
P Press
F Female Thread
Copper
M Male Thread
T Plain End
Shouldered
L Flanged
Style P507 Style P568 Style P562 Style P571 Style P563
Steel
G Grooved
Standard Short Tangent 90º Street 45º Elbow 45º Street
Coupling 90º Elbow Elbow (P × P) Elbow
AWWA
(P × P) (P × P) (P × T) (P × T)
Performance
High
Balancing
Style P508 Style P572 Style P578 Style P573 Style P576 Style P579
Hydronic
Slip Coupling Tee Tee with Tee with Male Threaded Female
(P × P) (P × P × P) Threaded Reducing Adapter Threaded
Branch Branch (P × M) Adapter
HDPE
(P × P × F) (P × P × P) (P × F)
Aquamine™
PVC
Style P585 Style P575 Style P566 Style P577 Style P574 Style P560 Grooved
PVC
STYLE D08
AGS
Pressures up to 1200 psi | 8274 kPa | 83 bar
Joints
•
Plain End
Stainless
Steel
No. 402DX
No. 404DX
X
1D
PVC
40
No. 405DX
o.
X
3D
N
40
No.
O-Rings
Design
Data
65 G-103 REV A
Index
Intro
Stainless Steel System
OGS
STYLE E497
AGS
Download publication 31.02 for complete information
VBSP
• Sizes from 2 – 12" | DN50 – DN300
• Pressures up to 232 psi | 1600 kPa | 16 bar
Hole Cut
• Regional availability, contact Victaulic for details
Expansion
Joints
Certifications/Listings:
Plain End
Download publication 10.01 for complete information
Stainless
Steel
StrengThin™ 100 Fittings
Download publication 31.04 for complete information
Copper
• Designed for thin wall stainless steel pipe
Shouldered
• Sizes from 2 – 12" | DN50 – DN300
Steel
• Pressures up to 232 psi | 1600 kPa | 16 bar
• Regional availability, contact Victaulic for details
AWWA
Performance
High
Certifications/Listings:
Balancing
Hydronic
Download publication 10.01 for complete information
HDPE
Aquamine™
PVC
No. E490 No. E491 No. E492 No. E493 No. E494 Grooved
PVC
SERIES E461
AGS
•
Certifications/Listings:
• Pressures up to 300 psi | 2068 kPa | 21 bar
Plain End
applications
• Sizes from 2 – 12" | DN50 – DN300
Performance
• Pressures up to 300 psi | 2068 kPa | 21 bar
High
SERIES E155
PVC
O-Rings
Design
Data
67 G-103 REV A
Index
Gaskets,
Expansion Stainless Shouldered High Hydronic Aquamine™ Grooved Seals and Design
Intro OGS AGS VBSP Hole Cut Joints Plain End Steel Copper Steel AWWA Performance Balancing HDPE PVC PVC FRP Tools O-Rings Data Index
68 G-103 REV A
Stainless Steel System
victaulic.com
Intro
Copper System
• EN 1057: R250
Joints
Plain End
Stainless
Steel
QuickVic™ Rigid Coupling (Style 607-CTS) 70 Butterfly Valve for Copper (Series 608N-CTS) 74
Copper
Outlets page
AWWA
Adapters page
Mechanical-T Bolted Branch Outlet and
Performance
Dielectric Waterway Fitting page For CTS standard products for copper tubing
(Types K, L, M or DWV) download publication 22.01
Aquamine™
Fittings page
For EN 1057 standard products for copper tubing
(R250) download publication 22.11
Installation-Ready™ Fittings for Copper 72
FRP
O-Rings
Design
Data
69 G-103 REV A
Index
Intro
Copper System
OGS
AD LAT
RE AL
ST
STYLE 607-CTS
IN
AGS
Download publication 22.13 for complete information
• Installation-Ready™ design
VBSP
• Designed for use on K, L, M or DWV copper tubing
• Sizes from 2 – 8" | DN50 – DN200
Hole Cut
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Optional galvanized housing coating
Expansion
Joints
• Regional availability, contact Victaulic for details
Certifications/Listings:
Plain End
Download publication 10.01 for complete information
Download publication 02.06 for potable water approvals
Stainless
Steel
Rigid Coupling
STYLE 606-AS
Copper
STYLE 606-EN
Shouldered
Download publication 22.11 for Style 606-EN
Steel
• Eliminates brazing or soldering
AWWA
• Style 606-AS available in sizes from
2 – 8" | DN50 – DN200
Performance
• Style 606-EN available in sizes from
High
2 – 6" | DN50 – DN150
• Pressures up to 355 psi | 2448 kPa | 24 bar
Approvals/Listings:
Balancing
Hydronic
• WRAS approved gasket
WaterMark
• Regional availability, contact Victaulic for details
Download publication 10.01 for complete information
HDPE
For CTS standard products for copper tubing
(Types K, L, M or DWV) download publication 22.01
Aquamine™
PVC
For Australian Standard (AS) products for copper tubing
(Types A, B or D) download publication 22.10 Grooved
PVC
STYLE 641-CTS
STYLE 641-EN
AGS
Certifications/Listings:
Plain End
or thread × thread
• Sizes from ½ – 4" | DN15 – DN100
Performance
• Pressures up to 300 psi | 2068 kPa | 21 bar
High
O-Rings
Certifications/Listings:
Design
Data
71 G-103 REV A
Index
Intro
Copper System
Installation-Ready™ Fittings
OGS
for Copper
AGS
Download publication 22.15 for complete information
VBSP
of the Style 607 rigid coupling
• Sizes from 2 – 3" | DN50 – DN80
Hole Cut
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Regional availability, contact Victaulic for details
Expansion
Joints
Certifications/Listings:
Plain End
Download publication 10.01 for complete information
Download publication 02.06 for potable water approvals
Stainless
Steel
Copper
No. 670 No. 671 No. 672 No. 675 No. 673
Shouldered
90° Elbow 45° Elbow Tee Reducing Tee Concentric
Steel
Reducer
AWWA
Performance
High
Balancing
Hydronic
HDPE
For CTS standard products for copper tubing
(Types K, L, M or DWV) download publication 22.01
Aquamine™
PVC
For Australian Standard (AS) products for copper tubing
(Types A, B or D) download publication 22.10 Grooved
PVC
WaterMark
• Regional availability, contact Victaulic for details
Download publication 10.01 for complete information
Download publication 02.06 for potable water approvals
Stainless
Steel
Copper
Shouldered
(Groove × Groove)
Tools
Seals and
Gaskets,
O-Rings
Design
Data
73 G-103 REV A
Index
Intro
Copper System
OGS
SERIES 608N-CTS
SERIES 608N-AS
AGS
Download publication 22.14 for 608N-CTS
Download publication 22.10 for 608N-AS
VBSP
• Joins quickly to copper tube by utilizing
Style 607 or Style 606 rigid couplings
Hole Cut
• Sizes from 2½ – 6" | DN65 – DN150
• Pressures up to 300 psi | 2068 kPa | 21 bar
Expansion
Joints
• Regional availability, contact Victaulic for details
Certifications/Listings:
Plain End
WaterMark
Stainless
Steel
Mechanical-T Bolted Branch Outlet
and Cross Assemblies for Copper
Copper
STYLE 622-CTS
Shouldered
Download publication 22.12 for complete information
Steel
• Provides a direct branch connection at any
location on K, L and M copper tubing
AWWA
• Sizes from 2½ – 4" | DN65 – DN100
• Pressures up to 300 psi | 2068 kPa | 21 bar
Performance
High
• Regional availability, contact Victaulic for details
Certifications/Listings:
Balancing
Hydronic
Download publication 10.01 for complete information
Download publication 02.06 for potable water approvals
HDPE
For CTS standard products for copper tubing
(Types K, L, M or DWV) download publication 22.01
Aquamine™
PVC
For Australian Standard (AS) products for copper tubing
(Types A, B or D) download publication 22.10 Grooved
PVC
Installation-Ready Flexible Coupling for Shouldered Steel Fittings 77
Copper
O-Rings
Design
Data
75 G-103 REV A
Index
Intro
Shouldered Steel System
Installation-Ready™ Flexible
-
N
Y™ IO
OGS
AD LAT
RE AL
STYLE SC77
AGS
Download publication 16.10 for complete information
VBSP
• Sizes from 2 – 8" | DN50 – DN200 (pipe O.D.)
• Pressures up to 580 psi | 4000 kPa | 40 bar
Hole Cut
• Supplied standard with galvanized coating
• Regional availability, contact Victaulic for details
Expansion
Joints
Plain End
Stainless
Flexible Coupling for
Steel
Shouldered Steel Pipe
Copper
STYLE SC85
Shouldered
Download publication 16.21 for complete information
Steel
• Sizes from 2 – 12" | DN50 – DN300 (pipe O.D.)
• Pressures up to 610 psi | 4200 kPa | 42 bar
AWWA
• Supplied standard with galvanized coating
Regional availability, contact Victaulic for details
Performance
•
High
Balancing
Hydronic
HDPE
Transition Coupling for
HDPE to Shouldered Steel
Aquamine™
PVC
STYLE SC998
Grooved
PVC
(pipe O.D.)
• Pressures rating conforms to the maximum
rating of the pipe
Tools
O-Rings
Design
Data
77 G-103 REV A
Index
Intro
Shouldered Steel System
OGS
SERIES 7S2
AGS
Download publication 08.44 for complete information
VBSP
• Sizes from 3 – 8" | DN80 – DN200 (pipe O.D.)
Pressures up to 350 psi | 2413 kPa | 24 bar
Hole Cut
•
• Regional availability, contact Victaulic for details
Expansion
Joints
Plain End
Stainless
Steel
Shouldered Butterfly Valve
SERIES 761SC
Copper
Download publication 08.31 for complete information
Shouldered
• Designed for bi-directional, dead end services
Steel
to full working pressure
• Available bare, with gear operator, with lever lock
AWWA
handle and memory stop or with 10-position
handle and memory stop
Sizes from 2 – 8" | DN50 – DN200 (pipe O.D.)
Performance
•
High
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Regional availability, contact Victaulic for details
Balancing
Hydronic
HDPE
Aquamine™
PVC
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
Coupling for AWWA Ductile Iron Pipe (Style 31) 80 Mechanical-T Spigot Outlet (Style 926) 43
Copper
Valves page
Vic-Flange Adapter for AWWA (Style 341) 80 Check Valve for AWWA (Series 317) 83
High
Fittings pages
O-Rings
Design
Data
79 G-103 REV A
Index
Intro
AWWA System
OGS
Ductile Iron Pipe
STYLE 31
AGS
Download publication 23.02 for complete information
VBSP
• Provides a rigid or flexible joint on Class 53
or higher pipe
Sizes from 3 – 36" | DN80 – DN900
Hole Cut
•
• Pressures up to 500 psi | 3447 kPa | 34 bar
Expansion
• Optional coatings include orange enamel, coal tar
Joints
epoxy, organic zinc primer and bituminous
Certifications/Listings:
• Regional availability, contact Victaulic for details
Plain End
Download publication 10.01 for complete information
Stainless
Steel
Transition Coupling
for IPS to AWWA
Copper
STYLE 307
Shouldered
Download publication 23.03 for complete information
Steel
• Single transition for connecting grooved end IPS
steel to grooved end AWWA ductile iron
AWWA
• Designed for Class 53 or higher pipe
• Sizes from 3 – 12" | DN80 – DN300
Performance
High
• Pressures up to 500 psi | 3447 kPa | 34 bar
• Optional coatings include galvanized, organic zinc
Certifications/Listings:
Balancing
Hydronic
primer and bituminous
• Regional availability, contact Victaulic for details
Download publication 10.01 for complete information
HDPE
Vic-Flange Adapter for AWWA
Aquamine™
STYLE 341
AWWA Fittings
OGS
•
Download publication 10.01 for complete information • Regional availability, contact Victaulic for details
Download publication 02.06 for potable water approvals
Stainless
Steel
Copper
Shouldered
90° Elbow 90° Long 45° Elbow 22 ½° Elbow 11 ¼° Elbow
Radius Elbow
AWWA
Performance
High
Balancing
O-Rings
Design
Data
81 G-103 REV A
Index
Intro
AWWA System
AWWA Fittings
OGS
Download publication 23.05 for complete information
AGS
• AWWA size fittings are supplied with rigid radius
grooves in accordance with ANSI/AWWA C-606
• Fittings conform to ANSI 21.10/AWWA C-110
VBSP
for center-to-end dimensions and AWWA C-153
or ANSI 21.10/AWWA C-110 for wall thicknesses
Hole Cut
• Available with a wide variety of coatings and linings
• Victaulic can supply tapped fittings that meet
Expansion
ANSI B16.1 dimension locations
Joints
Certifications/Listings: • Sizes from 3 – 36" | DN80 – DN900
• Pressure rated up to 350 psi | 2413 kPa | 24 bar
Plain End
Download publication 10.01 for complete information • Regional availability, contact Victaulic for details
Download publication 02.06 for potable water approvals
Stainless
Steel
Copper
Shouldered
No. 35-C No. 35-CR No. 33-C No. 30-C No. 30-CR No. 60-C
Steel
Cross Reducing Cross True Wye 45° Lateral 45° Reducing Cap
Lateral
AWWA
Performance
High
Balancing
No. 50-C No. 51-C
Hydronic
No. 10-CF No. 43-CF No. 100-CF
Concentric Eccentric 90° Flare Straight Flare 90° Long
Reducer Reducer Radius Flare
HDPE
Aquamine™
PVC
No. 20-CS No. 10-CS Grooved
PVC
•
• Pressure classes conforming to AWWA Class 250B
from 6 – 48" | DN150 – DN1200 and 150B for
Expansion
• Pressures up to 175 psi | 1207 kPa | 12 bar
• Regional availability, contact Victaulic for details
Performance
High
Balancing
Hydronic
HDPE
SERIES 365
PVC
• Pressures up to 175 psi | 1207 kPa | 12 bar
• Regional availability, contact Victaulic for details
Seals and
Gaskets,
O-Rings
Design
Data
83 G-103 REV A
Index
Intro
High Performance System for Steam and Chemical Services
OGS
joining solutions to include the industry’s first grooved
mechanical pipe joint designed for use on commercial
and industrial steam applications and chemical services.
AGS
Available in sizes 2 – 8" | DN50 – DN200, the Style 870
rigid coupling is part of a complete system of fittings and
VBSP
pipe preparation tool roll sets that eliminate the need to
weld steam systems up to 150 psi | 1034 kPa | 10 bar.
Hole Cut
Expansion
Joints
Plain End
Stainless
Steel
High Performance Rigid Coupling
for Steam and Chemical Services
Copper
STYLE 870
Shouldered
Download publication 100.02 for complete information
Steel
• Lubricant-free installation
• Excellent chemical resistance
AWWA
• Sizes from 2 – 8" | DN50 – DN200
Pressures up to 150 psi | 1034 kPa | 10 bar
Performance
•
High
• Nonsteam: Full vacuum up to 740 psi |
5102 kPa | 51 bar
Balancing
Hydronic
• -20°F to +366°F | -29°C to +186°C
• Regional availability, contact Victaulic for details
HDPE
OGS-200 Grooved End Fittings
Aquamine™
PVC
Download publication 100.01 for complete information
• 90° and 45° elbows, tees and reducing tees, caps, Grooved
PVC
Solder End (TA Series 786) 87 ICSS Low Lead Balancing Valve
Copper
Grooved End (TA Series 789) 88 Thread × Thread (TA Series 7FC) 92
Female Threaded End (Series 76T) 89 Balancing and Control Valve (PIBCV)
Thread × Thread (TA Series 7FP) 93
Aquamine™
O-Rings
85 G-103 REV A
Index
Intro
Hydronic Balancing Solutions
OGS
AGS
VBSP
Hole Cut
Expansion
Joints
Plain End
Stainless
Steel
Differential Pressure Controllers page Balancing Instruments page
Copper
Female Threaded End (TA Series 793) 95
TA Scope™ 99
Differential Pressure Controller —
Shouldered
Steel
Flanged End (TA Series 794) 95
AWWA
Flanged End (TA Series 7PR) 95
Performance
High
Balancing
Hydronic
KOIL-KIT™ Coil Packs page
(By Others)
Series 78U
Series 78K
HDPE
Hose (Optional)
SUPPLY
Series 78Y
Hose (Optional)
RETURN
Series 78U
Series 78K
Hose
(Optional)
Aquamine™
(Series 79B and 79A) 97
Bypass
Valve
(Optional)
Hose (Optional)
SUPPLY
Series 78Y
with Bypass Tee
Option
PVC
Coil Pack for Air Handling Units
(Series 79C and 79D) 97 Grooved
PVC
Coil Hose 98
FRP
Solder End
TA SERIES 786
AGS
•
Joints
TA SERIES 787
Shouldered
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Rated from -4°F to 250°F | -20°C to 120°C
Balancing
Hydronic
TA SERIES 78BL
PVC
requirements
• Sizes from ½ – 2" | DN15 – DN50
Tools
• Pressures up to 400 psi | 2800 kPa | 28 bar
• Rated from -4°F to 248°F | -20°C to 120°C
Seals and
Gaskets,
O-Rings
87 G-103 REV A
Index
Intro
Hydronic Balancing Solutions
OGS
Union Inlet
SERIES 78K
AGS
Download publication 08.16 for complete information
VBSP
• “Y” patterned globe valve with a union adapter
• Digital hand wheel with 4 turns to open,
Hole Cut
1440 degrees of rotation, and memory stop
• Optional tailpieces available for reductions
Sizes from ½ – 2" | DN15 – DN50
Expansion
•
Joints
• Pressures up to 300 psi | 2068 kPa | 21 bar
• Rated from -4°F to 250°F | -20°C to 120°C
Plain End
• Regional availability, contact Victaulic for details
Stainless
Steel
Manual Balancing Valve —
Flanged End
Copper
TA SERIES 788
Shouldered
Download publication 08.16 for complete information
Steel
• “Y” patterned globe valve
• Digital hand wheel with 8, 12, or 16 turns to open
AWWA
(depending on size), 1440 degrees of rotation,
and memory stop
Performance
• Class 150 RF, ASME/ANSI B16.42
High
• Sizes from 2½ – 16" | DN65 – DN400
Balancing
Pressures up to 250 psi | 1725 kPa | 17 bar
Hydronic
•
• Regional availability, contact Victaulic for details
HDPE
Manual Balancing Valve —
Grooved End
Aquamine™
PVC
TA SERIES 789
Grooved
PVC
• Pressures up to 350 psi | 2413 kPa | 24 bar
• Rated from -4°F to 250°F | -20°C to 120°C
Seals and
Gaskets,
O-Rings
Threaded End
SERIES 76T
AGS
SERIES 76B
Balancing
Hydronic
87 psi | 600 kPa | 6 bar
PVC
O-Rings
Design
Data
89 G-103 REV A
Index
Intro
Hydronic Balancing Solutions
OGS
Male × Female
SERIES 76K
AGS
Download publication 08.34 for complete information
VBSP
• Contains an automatic cartridge with a replaceable
orifice plate, specify cartridge type when ordering
Hole Cut
• Differential pressure range dependent upon
cartridge selected; 43.5 psi | 300 kPa | 3 bar or
87 psi | 600 kPa | 6 bar
Expansion
Joints
• DZR Brass body with an EPDM O-Ring and NPT thread
• Sizes from ½ – 2" | DN15 – DN50
Plain End
• Pressures up to 365 psi | 2517 kPa | 25 bar
• Rated from -4°F to 250°F | -20°C to 120°C
• Regional availability, contact Victaulic for details
Stainless
Steel
Copper
Shouldered
Steel
AWWA
Automatic Balancing Valve with
Ball Valve Kit — Union Inlet
Performance
High
SERIES 76V
Balancing
Hydronic
Download publication 08.34 for complete information
HDPE
• Differential pressure range dependent upon
cartridge selected; 43.5 psi | 300 kPa | 3 bar or
Aquamine™
87 psi | 600 kPa | 6 bar
PVC
• DZR Brass body with an EPDM O-Ring and NPT thread
• Sizes from ½ – 2" | DN15 – DN50 Grooved
PVC
Certifications/Listings:
Design
Data
Grooved End
SERIES 76G
AGS
•
Joints
TA SERIES TC
Grooved
PVC
• Pressures up to 230 psi | 1586 kPa | 16 bar
• Rated from -4°F to 250°F | -20°C to 120°C
Seals and
Gaskets,
O-Rings
91 G-103 REV A
Index
Intro
Hydronic Balancing Solutions
OGS
for Modulating Control —
Female × Female
AGS
TA SERIES TCM
VBSP
Download publication 08.38 for complete information
Hole Cut
• Ensures accurate hydronic control and optimum
throughput over a long lifetime
Expansion
• Sizes from ½ – 1" | DN15 – DN25
Joints
• Pressures up to 230 psi | 1586 kPa | 16 bar
Rated from -4°F to 250°F | -20°C to 120°C
Plain End
•
• Regional availability, contact Victaulic for details
Stainless
Steel
Copper
Shouldered
Steel
AWWA
Combined Balancing and Control
Valve — Thread × Thread
Performance
High
TA SERIES 7FC
Balancing
Hydronic
Download publication 08.52 for complete information
HDPE
• EQM characteristics (Equal Percentage Modified)
• 1¼ – 2" | DN32 – DN50 Female NPT Threads
Aquamine™
230 psi | 1586 kPa | 16 bar
• 2½ – 6" | DN65 – DN150 ANSI Class 150 Flange PVC
365 psi | 2517 kPa | 25 bar Grooved
PVC
•
• Pressures up to 230 psi | 1586 kPa | 16 bar
Rated from -4°F to 250°F | -20°C to 120°C
Expansion
•
Joints
TA SERIES 7FP
Balancing
Hydronic
230 psi | 1586 kPa | 16 bar
PVC
O-Rings
Design
Data
93 G-103 REV A
Index
Intro
Hydronic Balancing Solutions
OGS
Balancing and Control Valve
TA SERIES 7CP
AGS
Download publication 08.37 for complete information
VBSP
• Lower pump head/energy consumption
• Sizes from ½ – 1¼" | DN15 – DN32
Hole Cut
• Pressures up to 230 psi | 1586 kPa | 16 bar
• Rated from 32°F to 194°F | 0°C to 90°C
Expansion
Joints
• Regional availability, contact Victaulic for details
Plain End
Stainless
Steel
Compact Pressure Independent
Balancing and Control Valve
Copper
TA SERIES 7MP
Shouldered
Download publication 08.55 for complete information
Steel
• EQM flow characteristics provide highly precise
temperature control
AWWA
• Sizes from ½ – 1¼" | DN15 – DN32
• Pressures up to 230 psi | 1586 kPa | 16 bar
Performance
High
• Rated from 32°F to 194°F | 0°C to 90°C
• Regional availability, contact Victaulic for details
Balancing
Hydronic
HDPE
Control Valve with Return
Temperature Controller
Aquamine™
PVC
TA SERIES 7CT
Grooved
PVC
•
• Pressures up to 230 psi | 1586 kPa | 16 bar
• Rated from 32°F to 176°F | 0°C to 80°C
Tools
TA SERIES 794
Shouldered
TA Series 7PR
Grooved
PVC
116 psi | 800 kPa | 8 bar
• Regional availability, contact Victaulic for details
Seals and
Gaskets,
O-Rings
Design
Data
95 G-103 REV A
Index
Intro
Hydronic Balancing Solutions
OGS
TA SERIES 736
AGS
Download publication 08.16 for complete information
VBSP
• Continuously measures the flow and differential
pressure through and across the IMI TA
Hole Cut
balancing valves
• Measurement probes provided for direct connection
Expansion
to the measurement points on all TA Series 786,
Joints
787, 788, and 789 balancing valves
• Regional availability, contact Victaulic for details
Plain End
Stainless
Steel
Copper
Shouldered
Steel
AWWA
(By Others)
KOIL-KIT™ Coil Pack
SERIES 799 and SERIES 79V
Performance
High
Hose (Optional)
RETURN
Download publication 08.30 for complete information
Series 78U
Balancing
Hydronic
• The Series 799 consists of the following
Series 78K
components: Series 78Y Y-strainer/ball valve
Hose (Optional)
or Series 78T ball valve union combination,
two coil hoses, a Series 78U union port fitting,
HDPE
SUPPLY
and a balancing valve
• The Series 79V includes the option to have the
Aquamine™
Series 78Y
PVC
ATC valve of your choice assembled and
shipped with the Victaulic® KOIL-KIT coil pack
• Suitable for a variety of hot and cold water Grooved
PVC
(By Others)
and Bypass Options
Hose (Optional) SERIES 79B and SERIES 79A
AGS
RETURN
Series 78U
Download publication 08.30 for complete information
Series 78K
VBSP
Hose
(Optional) • The Series 79B consists of the following
components: Series 78Y Y-strainer/ball valve
or Series 78T ball valve union combination,
Hole Cut
Bypass
Valve
two coil hoses, a Series 78U union port fitting,
(Optional) and a balancing valve as well as various options
for bypass valves
Expansion
Joints
Hose (Optional)
• The Series 79A includes option to have the ATC
SUPPLY
valve of your choice assembled and shipped
Plain End
Series 78Y
with the Victaulic® KOIL-KIT coil pack
Sizes from ½ – 2" | DN15 – DN50
with Bypass Tee
Option •
• Regional availability, contact Victaulic for details
Stainless
Steel
Copper
Shouldered
Steel
AWWA
O-Rings
Design
Data
97 G-103 REV A
Index
Intro
Hydronic Balancing Solutions
OGS
Download publication 08.30 for complete information
AGS
• Stainless steel braided hose and an EPDM
polymer core with stainless ferrules; available
as male by female swivel and male by male swivel
VBSP
• Available lengths:
12" | 300 mm; 24" | 610 mm; 36" | 914 mm
Hole Cut
• Sizes from ½ – 2" | DN15 – DN50
• 375 psi | 2585 kPa | 26 bar maximum CWP
Expansion
(varies by size)
Joints
• Suitable for operating temperatures
up to 230°F | 110°C
Plain End
• Regional availability, contact Victaulic for details
Stainless
Steel
KOIL-KIT™ Y-Strainer/Ball Valve
Combination
Copper
SERIES 78Y
Shouldered
Download publication 08.30 for complete information
Steel
• DZR brass body consisting of a full port valve,
strainer and blow down valve with flow
AWWA
measuring ports
• Multiple end connections available
Performance
• Sizes from ½ – 2" | DN15 – DN50
High
• Pressures up to 400 psi | 2758 kPa | 28 bar
Balancing
Rated up to 230°F | 110°C
Hydronic
•
• Regional availability, contact Victaulic for details
HDPE
KOIL-KIT™ Ball Valve/Union
Combination
Aquamine™
PVC
SERIES 78T
Grooved
PVC
• Pressures up to 400 psi | 2758 kPa | 28 bar
• Rated up to 230°F | 110°C
Seals and
Gaskets,
O-Rings
SERIES 78U
AGS
• Rated up to 230°F | 110°C
• Regional availability, contact Victaulic for details
Expansion
Joints
Plain End
Stainless
Steel
TA Scope™
Aquamine™
TA SERIES 734
PVC
99 G-103 REV A
Index
Gaskets,
Expansion Stainless Shouldered High Hydronic Aquamine™ Grooved Seals and Design
Intro OGS AGS VBSP Hole Cut Joints Plain End Steel Copper Steel AWWA Performance Balancing HDPE PVC PVC FRP Tools O-Rings Data Index
100G-103 REV A
Hydronic Balancing Solutions
victaulic.com
Intro
Refuse-to-Fuse™ HDPE System
Style 905
Plain End
Refuse-to-Fuse Coupling for
Shouldered
Steel
Refuse-to-Fuse Coupling for Mechanical-T Spigot Outlet (Style 926) 43
AWWA
Tools page
ST
IN
PVC
HDPE Pipe
STYLE 905
Grooved
PVC
O-Rings
Certifications/Listings:
Design
WaterMark
Data
OGS
AD LAT
RE AL
HDPE-to-Steel Pipe
ST
IN
STYLE 907
AGS
Download publication 19.10 for complete information
VBSP
• Designed to provide a single transition from plain
end HDPE pipe from DR7 – DR17 to grooved steel
sized piping system components
Hole Cut
• Sizes from 2 – 8" IPS HDPE to 2 – 8" IPS grooved steel
• Sizes from 63 – 225 mm ISO HDPE to 2 – 8"
Expansion
Joints
ISO grooved steel
Certifications/Listings: • Pressure rating meets or exceeds the performance
capability of the pipe
Plain End
WaterMark
Stainless
Steel
Refuse-to-Fuse™ Coupling for
Double-Grooved HDPE Pipe
Copper
STYLE 908
Shouldered
Download publication 19.09 for complete information
Steel
• Designed for double grooved HDPE from DR7 – DR17
• Sizes from 8 – 36" IPS and 250 – 900 mm ISO
AWWA
• Pressure rating meets or exceeds the performance
capability of the pipe
Performance
High
• Standard Victaulic coupling assembly procedure
used for installation
Certifications/Listings:
Balancing
Hydronic
Download publication 10.01 for complete information
HDPE
Refuse-to-Fuse™ Fittings
for HDPE Pipe
Aquamine™
Download publication 19.11 for complete information PVC
Grooved
PVC
Certifications/Listings:
No. H10 No. H11 No. H20 No. H50
90° Elbow 45° Elbow Tee Reducer
Design
WaterMark
Data
Aquamine Plain End Coupling (Series 2970) 104 Aquamine Fittings 105
Copper
O-Rings
Design
Data
OGS
SERIES 2970
AGS
Download publication 50.01 for complete information
VBSP
• Sizes from 2 – 8" | DN50 – DN200
Pressures up to 350 psi | 2413 kPa | 24 bar
Hole Cut
•
Expansion
Joints
Plain End
Stainless
Steel
Aquamine™ Transition Coupling
for PVC to HDPE
Copper
SERIES 2971
Shouldered
Download publication 50.05 for complete information
Steel
• Provides convenient transition from PVC to HDPE
without need for special adapters
AWWA
• Sizes from 2 – 8" | DN50 – DN200
• Pressures up to 350 psi | 2413 kPa | 24 bar
Performance
High
Balancing
Hydronic
HDPE
Aquamine™ Transition Coupling
for PVC to Groove
Aquamine™
PVC
SERIES 2972
Grooved
PVC
Aquamine™ Fittings
OGS
• Pressures up to 350 psi | 2413 kPa | 24 bar
Hole Cut
Expansion
Joints
Plain End
Certifications/Listings:
Download publication 02.06 for potable water approvals
Stainless
Steel
Copper
Shouldered
Series 2904 Series 2905 Series 2906 Series 2907 Series 2908 Series 2909
Steel
Series 2910 Series 2912 Series 2913 Series 2914 Series 2915 Series 2916
Hydronic
90º Elbow 45º Long 90º Sweep 45º Sweep End Cap Transition
(ALM × ALM) (ALM × ALM) (ALM × ALM) (ALM × ALM) (ALM) Nipple
(ALM × FLG)
HDPE
Aquamine™
PVC
Series 2917 Series 2918 Series 2919 Series 2920 Series 2930
Grooved
PVC
Connection Key
ALF Female End
Tools
O-Rings
OGS
SERIES 2900
AGS
Download publication 50.01 for complete information
VBSP
• Sizes from 2 – 12" | DN50 – DN300
Pressures up to 350 psi | 2413 kPa | 24 bar
Hole Cut
•
• For the Aquamine grooving tool, see pg. 131
Expansion
Joints
Plain End
Certifications/Listings:
Download publication 02.06 for potable water approvals
Stainless
Steel
Aquamine™ Ball Valve
SERIES 2921
Copper
Download publication 50.01 for complete information
Shouldered
• Available with a lever handle or a square nut
Steel
• Sizes from 2 – 6" | DN50 – DN150
• Pressures up to 100 psi | 690 kPa | 7 bar
AWWA
Performance
High
Balancing
Hydronic
HDPE
Aquamine™ Butterfly Valve
Aquamine™
SERIES 2950
• Pressures up to 250 psi | 1724 kPa | 17 bar
Tools
Seals and
Gaskets,
O-Rings
Design
Data
ST
STYLE 171
IN
PVC
O-Rings
Design
Data
OGS
offer more efficient installation for applications currently
being joined by wrap and butt welding. The Style 296-A
and Style 229S couplings can be installed in adverse
AGS
conditions while saving installation time that is currently
seen with traditional joining methods.
VBSP
Victaulic FRP system solutions can be installed in
inclement weather conditions and used on various
Hole Cut
applications including odor control.
Expansion
Joints
Plain End
Style 296-A
Stainless
Steel
Coupling for Fiberglass
Reinforced Plastic Pipe
Copper
STYLE 296-A
Shouldered
Download publication 90.01 for complete information
Steel
• Designed to create a rigid pipe joint without
any special tools while maintaining existing
AWWA
support requirements
• Can be installed in any weather
Performance
• No curing time required
High
• Sizes from 1 – 12" | DN25 – DN300
Balancing
Pressures up to 150 psi | 1034 kPa | 10 bar
Hydronic
•
HDPE
Non-Restrained Flexible
Coupling for Fiberglass
Aquamine™
PVC
Reinforced Plastic Pipe
STYLE 229S Grooved
PVC
Pressures up to 25 psi | 172 kPa | 1.7 bar
Gaskets,
O-Rings
•
Design
Data
Field Portable Roll Grooving Tools page Plant/Shop Fabrication Roll Grooving Tools page
VE106/VE107 114
VG824, VG824DG,
Aquamine™
VE450FSD 120
Seals and
O-Rings
OGS
AGS
VBSP
Hole Cut
Expansion
Joints
Plain End
Stainless
Steel
Aquamine™ Grooving Tools page Tool Accessories page
Copper
Power Mule II 135
Shouldered
Steel
Hole Cutting Tools page Adjustable Pipe Stands 135 – 137
AWWA
VHCT900 132 Tool Carry Bag 139
Performance
High
VIC-TAP II 132 System Safety Test Accessories 139
Balancing
Hydronic
Pipe Cut-Off Tools page Closure Tools page
HDPE
VCT1 Manual 133 Style 809 Ring Clamps 140
Aquamine™
VCT2 Automatic 133 VBSP Closure Tools 140
PVC
Grooved
PVC
• Weight: 17 lbs. | 8 kg
Expansion
Joints
Plain End
20 25 32 40 50
Steel 5 – 10 5 – 40
Stainless 40S
VE12
Aluminum 1 5 – 10 5 – 40
Copper
PVC Plastic 40
VE12SS Lt. Wall SS 5S – 10S
Shouldered
VE26S
Stainless 40S Only
VE26C Copper K, L, M and DWV
Australia
Seals and
VE26AC A, B and D
Gaskets,
O-Rings
Copper
Aluminum 1 5 – 40 5 – 10
VE26P
PVC Plastic 40
VE26SS Lt. Wall SS 5S – 10S
Design
Data
OGS
VE26/46 POWER DRIVE KIT
AGS
Download publication 24.01 for complete information
VBSP
Ridgid® 300 Power Drive
• Newer tools with serial numbers ending in “C”
Hole Cut
are compatible with the Power Drive Kit; tools
which do not contain the “C” suffix will require
retrofit to accept the Power Drive Kit; contact
Expansion
Joints
Victaulic for details
• Weight: 7 lbs. | 3 kg
Plain End
Stainless
Steel
Copper
Shouldered
Steel
AWWA
Field Portable Roll Grooving Tools
VE46 GROOVE IN-PLACE
Performance
High
Download publication 24.01 for complete information
Balancing
Hydronic
• Tool is manually operated using the supplied crank
• Enhanced tracking rolls allow bi-directional grooving
and helps to hold the tool on the pipe end during
HDPE
the roll grooving process
• Optional power drive adapter kit available to
Aquamine™
alternately groove pipe using a Ridgid® 300
PVC
Power Drive or VPD752
• Power Requirements: None Grooved
PVC
• Weight: 28 lbs. | 13 kg
VE46S
Stainless 40S Only
Aluminum 1 5 – 40
VE46P
PVC Plastic 40 40 – 80
Seals and
Gaskets,
O-Rings
• Weight: 37 lbs. | 17 kg
Expansion
Joints
Plain End
Steel 5 – 40 5 – 10
Steel
VE226M
Stainless 40S Only
VE226C Copper K, L, M and DWV
Australian
VE226AC 20 A, B, and D
AWWA
Copper
VE226BSS Lt. Wall SS 5S – 10S
VE226MSS Lt. Wall SS 5S – 10S
Performance
Aluminum 1 5 – 40 5 – 10
VE226P
High
PVC Plastic 40
1. 6061-T4 or 6063-T4 Alloy must be used.
20. Available in Australia only
Balancing
Hydronic
HDPE
O-Rings
Design
Data
OGS
VE106/VE107 GROOVE-N-GO
AGS
Download publication 24.01 for complete information
VBSP
• Reduces pipe handling by allowing the tool to be
wheeled directly to the pipe preparation site
Hole Cut
• ⁄8" | 9.5 mm square ratchet drive for operation
3
(standard)
Expansion
Joints
• Enhanced tracking rolls help to keep the pipe
on the tool during the roll grooving process
• Completely self-contained unit with an integral
Plain End
motor, safety foot switch and power plug
• Power Requirements:
Stainless
VE106 is provided with 110 volt, 15 amp power;
Steel
VE107 is provided with 220 volt, 6 amp power
• Weight: 140 lbs. | 64 kg
Copper
Shouldered
Steel
AWWA
Performance
High
Balancing
Hydronic
HDPE
Tool Ratings — Maximum NOTE:
Pipe Size (in | mm) / Schedule For additional information on Victaulic
Pipe Size Capacity
Aquamine™
solutions for preparing copper tube for
1¼ 1½ 2 2½ 3 3½ 4 5 6
PVC
grooved assembly, please contact Victaulic.
Model Pipe Material Notes 32 40 50 60 80 90 100 125 150
Steel 2, 3 5 – 40
VE106 Stainless 2 40S Grooved
PVC
STYLE VE206
AGS
VE206
PVC
O-Rings
Design
Data
OGS
VE272SFS
AGS
Download publication 24.01 for complete information
VBSP
• Enhanced tracking rolls help to keep the pipe
on the tool during the roll grooving process
Hole Cut
• The fully-motorized, semi-automatic,
electrohydraulic tool comes complete with
Expansion
safety guards and safety foot switch
Joints
• Power Requirements: Victaulic® VPD752
or Ridgid® 300 Power Drive
Plain End
• Weight: 184 lbs. | 84 kg
Stainless
Steel
Copper
Shouldered
Steel
AWWA
Performance
High
Balancing
Hydronic
HDPE
VE272SFS
Tool Ratings — Maximum NOTE:
Pipe Size (in | mm) / Schedule For additional information on Victaulic
Pipe Size Capacity
Aquamine™
solutions for preparing copper tube for
¾ 1 1¼ 1½ 2 2½ 3 3½ 4 5 6 8 10 12
PVC
grooved assembly, please contact Victaulic.
Model Pipe Material Notes 20 25 32 40 50 60 80 90 100 125 150 200 250 300
Steel (OGS) 2, 3 5 – 40 5 – 20
Steel (OGS-200) 17 40 – 80 40 Grooved
PVC
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic for details.
4. Use grooving rolls marked with the prefix RX.
5. Use grooving rolls marked with the prefix RR.
Seals and
Gaskets,
O-Rings
VE270FSD/VE271FSD
AGS
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic for details.
4. Use grooving rolls marked with the prefix RX.
5. Use grooving rolls marked with the prefix RR.
Seals and
Gaskets,
O-Rings
OGS
VE416FS
AGS
Download publication 24.01 for complete information
VBSP
production grooving; For field production grooving
capabilities, use a VE450FSD tool, see pg. 120
Hole Cut
• Equipped with a pipe stabilizer for 6 – 16" |
DN150 – DN400 pipe sizes to control pipe sway
Expansion
• Groove depth adjuster allows for easy adjustment
Joints
for initial groove diameter
• The fully-motorized, semi-automatic,
Plain End
electrohydraulic tool comes complete with
safety guards and safety foot switch
• Power Requirements: Victaulic® VPD752
Stainless
Steel
or Ridgid® 300 Power Drive
• Weight: 240 lbs. | 109 kg
Copper
Shouldered
Steel
AWWA
Performance
High
Balancing
Hydronic
HDPE
NOTE:
Pipe Size (in | mm) / Schedule For additional information on Victaulic
Aquamine™
Tool Ratings — Maximum solutions for preparing copper tube for
PVC
Pipe Size Capacity OGS AGS grooved assembly, please contact Victaulic.
2 2½ 3 4 5 6 8 10 12 14 16
Model Pipe Material Notes 50 60 80 100 125 150 200 250 300 350 400
Grooved
Steel 2, 3 5 – 80 5 – 40 10 – STD STD Wall AGS
PVC
PVC Plastic 6 40 40 – 80 40
Copper 5 K, L, M and DWV
1. 6061-T4 or 6063-T4 Alloy must be used.
2. Use standard grooving rolls marked with the prefix R.
Tools
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic for details.
4. Use grooving rolls marked with the prefix RX.
5. Use grooving rolls marked with the prefix RR.
Seals and
Gaskets,
O-Rings
VE416FSD/VE417FSD
AGS
• Power Requirements:
VE416FSD is provided with 110 volt, 15 amp for
integral gear motor;
Copper
NOTE:
Pipe Size (in | mm) / Schedule For additional information on Victaulic
Aquamine™
Pipe Size Capacity OGS AGS grooved assembly, please contact Victaulic.
2 2½ 3 4 5 6 8 10 12 14 16
Model Pipe Material Notes 50 60 80 100 125 150 200 250 300 350 400
Grooved
Steel (OGS-200) 17 80
Stainless 2 40S STD STD Wall RW AGS
VE416FSD/
Lt. Wall SS 4 5S – 10S 10S RWX
VE417FSD
FRP
Aluminum 1, 6 5 – 40 5 – STD
PVC Plastic 6 40 40 – 80 40
Copper 5 K, L, M and DWV
1. 6061-T4 or 6063-T4 Alloy must be used.
Tools
O-Rings
OGS
VE450FSD
AGS
Download publication 24.01 for complete information
VBSP
production grooving
• Enhanced tracking rolls help to keep the pipe
Hole Cut
on the tool during the roll grooving process,
and quickly change upper roll design
Expansion
• Lifting point to move the tool using a crane
Joints
• Frame can accept most forklifts
• Onboard storage for tool accessories
Plain End
• Power Requirements: Self-contained unit with two
220 volt, single phase 50/60 hertz, 20 amp integral
Stainless
gear motors to handle heavier loads, safety foot
Steel
switch and power cord/plug
• Weight: 825 lbs. | 374 kg
Copper
Shouldered
Steel
AWWA
Performance
High
Balancing
Hydronic
HDPE
Tool Ratings — Pipe Size (in | mm) / Schedule
Aquamine™
Maximum Pipe
PVC
Size Capacity OGS AGS
Pipe 4 5 6 8 10 12 14 16 18 14 16 18 20 22 24
Model Notes 100 125 150 200 250 300 350 400 450 350 400 450 500 550 600
Material Grooved
PVC
5–
Steel 3, 7 5 – 40 5 – STD
STD
Stainless 8 40S STD STD
VE450FSD
Lt. Wall SS 9 5S – 10S 10S RWX
FRP
Aluminum 1, 6 5 – 40 STD
PVC Plastic 6 40 – 80 40
1. 6061-T4 or 6063-T4 Alloy must be used.
Tools
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic for details.
6. Use grooving rolls marked with the prefix RP.
7. Use standard grooving rolls marked with the prefix R for both OGS and AGS.
8. Use standard grooving rolls marked with the prefix R for OGS and RW for AGS.
Seals and
Gaskets,
O-Rings
9. Use grooving rolls marked with the prefix RX for OGS and RWX for AGS. (Special RWX Rolls are available for grooving true Sch. 10 (0.250" | 6.4 mm).
Design
Data
Plant/Shop Fabrication
OGS
• Weight: 735 lbs. | 333 kg
Shouldered
Steel
AWWA
Performance
High
Balancing
Hydronic
HDPE
O-Rings
14. A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RP02272L02
Design
Data
Plant/Shop Fabrication
OGS
Roll Grooving Tools
VE414MC
AGS
Download publication 24.01 for complete information
VBSP
• The fully-motorized, semi-automatic,
electrohydraulic tool comes complete with
safety guards and safety foot switch
Hole Cut
• Roll changes are quick and easy,
without removing shafts
Expansion
Joints
• Enhanced tracking rolls help to keep the pipe
on the tool during the roll grooving process
• Power Requirements: 220/440 volt, 3-phase,
Plain End
60 hertz standard; the tool can also be supplied
in various voltages, contact Victaulic for details
Stainless
• 3-phase requires tool power to be hard wired
Steel
by a local certified electrician
• Weight: 735 lbs. | 333 kg
Copper
Shouldered
Steel
AWWA
Performance
High
Balancing
Hydronic
HDPE
NOTE:
Pipe Size (in | mm) / Schedule For additional information on Victaulic
Aquamine™
Tool Ratings — Maximum solutions for preparing copper tube for
PVC
Pipe Size Capacity OGS AGS grooved assembly, please contact Victaulic.
2 2½ 3 4 5 6 8 10 12 14 16
Model Pipe Material Notes 50 60 80 100 125 150 200 250 300 350 400
Grooved
Steel 3, 7 5 – 80 5 – 40 10 – STD 10 – STD
PVC
PVC Plastic 6 40 40 – 80 40
Copper 5 K, L, M and DWV
1. 6061-T4 or 6063-T4 Alloy must be used.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic for details.
Tools
8. Use standard grooving rolls marked with the prefix R for OGS and RW for AGS.
9. Use grooving rolls marked with the prefix RX for OGS and RWX for AGS. (Special RWX Rolls are available for grooving true Sch. 10 (0.250" | 6.4 mm).
Design
Data
Plant/Shop Fabrication
OGS
• Weight: 1500 lbs. | 680 kg
Shouldered
Steel
AWWA
14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 48 50 60
Model Pipe Material Notes 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1200 1250 1500
Balancing
Hydronic
3, 8,
Steel .250 – .500 .375 – .500
18
VE460
Stainless 8 STD
Lt. Wall SS 9 5S – 10S, TRUE 10
HDPE
4 5 6 8 10 12 14 16 18 20 22 24
Model Pipe Material Notes
100 125 150 200 250 300 350 400 450 500 550 600
Steel (OGS) 3, 8 5 – 80 5 – XS
Grooved
40 –
PVC
Steel (OGS-200) 17
80
VE460 Stainless 8 40S STD
Lt. Wall SS 9 5S – 10S 5S – 10S, TRUE 10
FRP
Aluminum 1, 6 5 – 40
PVC Plastic 6 40 – 80 40
1. 6061-T4 or 6063-T4 Alloy must be used.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic for details.
Tools
9. Use grooving rolls marked with the prefix RX for OGS and RWX for AGS. (Special RWX Rolls are available for grooving true Sch. 10 (0.250" | 6.4 mm).
Gaskets,
O-Rings
Plant/Shop Fabrication
OGS
Roll Grooving Tools
VE872
AGS
Download publication 24.01 for complete information
VBSP
• The semi-automatic, electrohydraulic tool comes
complete with safety guards and safety foot switch
Support bases are required to groove 30" | DN750
Hole Cut
•
and larger pipe sizes; each support base is
16" | 406 mm in height and corresponds with
Expansion
a range of allowable pipe sizes it can groove
Joints
• Power Requirements: 220/440 volt, 3-phase,
60 hertz standard; the tool can also be supplied
Plain End
in various voltages, contact Victaulic for details
• 3-phase requires tool power to be hard wired
by a local certified electrician
Stainless
Steel
• Weight: 1900 lbs. | 862 kg
Copper
Shouldered
Steel
AWWA
Tool Ratings — Maximum
Pipe Size (in | mm) † / Schedule
Pipe Size Capacity
Performance
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 48 50 54 56 60 62 72
High
Model Pipe Material Note 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1200 1250 1350 1400 1500 1550 1800
Balancing
Hydronic
Carbon Steel .562/.625 wall Grade B Only
11. Physical properties shall be in accordance with API specification 5L, Grades B, X42, X46, X52, X56 or X60, download publication 25.09.
For physical properties not listed contact Victaulic for details.
HDPE
† Sizes 8 – 12" | 200 – 300 mm require OGS roll sets; for 14 – 72" | 350 – 1800 mm sizes AGS roll sets are needed.
Note: Maximum ratings are limited to pipe that does not exceed the yield strength of API-5L Grade “B”, ASTM Grade “B”, 150 Brinell Hardness Number (BHN) maximum.
Aquamine™
PVC
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
Plant/Shop Fabrication
OGS
4 5 6 8 10 12 14 16 18 20 22 24
Model Pipe Material
High
100 125 150 200 250 300 350 400 450 500 550 600
10 – 40 (OGS) Standard Wall (AGS)
RG5200i Carbon Steel
Automatic Semi-Automatic
Balancing
Hydronic
† Light wall pipe can only be grooved in OGS sizes. For 24" | DN600 or larger please contact Victaulic.
HDPE
Aquamine™
PVC
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
OGS
VG28GD (GEAR DRIVE)
VG28GD-ABR (ABRASION)
VDG26GD (DOUBLE GROOVE)
AGS
VG26GD-COR (CORROSION)
VBSP
Download publication 24.01 for complete information
Hole Cut
for unlined piping systems
• VG28GD-ABR will produce a single OGS cut groove
that allows for lining of the pipe for abrasive services
Expansion
Joints
• VDG26GD will produce a double OGS cut groove
for high pressure systems in conjunction with
installing the 6" | DN150 Style 808 couplings
Plain End
• VG26GD-COR will cut groove carbon steel pipe in
preparation for being rubber lined and machined for
Stainless
abrasion and corrosion resistance
Steel
• The VG28GD, VG28GD-ABR VDG26GD, and
VG26GD-COR are designed to be driven by the
Copper
Power Mule II
• Drive Requirements: External drive, min.
1½ hp | 1.12 kw
Shouldered
Steel
• Drive Speed: 38 rpm max.
• Weight: 37 lbs. | 17 kg
AWWA
Tool Ratings — Maximum
Pipe Size (in | mm) / Schedule
Pipe Size Capacity
Performance
2 2½ 3 3½ 4 5 6 8
High
Model Pipe Material Note 50 65 80 90 100 125 150 200
Steel 15, 16 40 – 80 40
Stainless 15 40 – 80
VG28GD
Balancing
Hydronic
Aluminum 15 40 – 80
Ductile Iron 15 Class 53 Min.
15. Special knives and stops may be required.
16. Maximum steel pipe wall thickness up to 0.437”/11.1 mm.
HDPE
Tool Ratings — Maximum Pipe Size
Pipe Size (in | mm) / Schedule
Capacity
Aquamine™
Pipe 2 2½ 3 3½ 4 5 6 8
PVC
Model Material Note 50 65 80 90 100 125 150 200
VG28GD-ABR Steel 15 40 – 80 40
15. Special knives and stops may be required. Grooved
PVC
VG824 (OGS)
VG824-ABR (ABRASION OGS)
VG824DG (DOUBLE GROOVE)
AGS
• Weight: 82 lbs. | 37.2 kg
AWWA
Pipe 8 10 12 14 16 18 20 22 24
High
Model Material Note 200 250 300 350 400 450 500 550 600
Steel 40 – 80 30 – STD
Stainless 30 – STD
VG824 15
Balancing
Hydronic
Aluminum 30 – STD
Ductile Iron Class 53 Min.
15. Special knives and stops may be required.
HDPE
Model Material Note 200 250 300 350 400 450 500 550 600
PVC
VG824-ABR Steel 15 40 – XS
15. Special knives and stops may be required.
Grooved
PVC
VG824DG Steel 15 40 – 80
15. Special knives and stops may be required.
O-Rings
OGS
VG828 (AGS)
AGS
Download publication 24.01 for complete information
VBSP
• The VG828 is designed to be driven
by the Power Mule II
Hole Cut
• Drive Requirements: External drive, min.
1½ hp | 1.12 kw
• Drive Speed: 38 rpm max.
Expansion
Joints
• Weight: 82 lbs. | 37.2 kg
Plain End
Tool Ratings — Maximum Pipe
Pipe Size (in | mm) / Schedule
Size Capacity
Stainless
Steel
Pipe 14 16 18 20 22 24
Model Note Material 350 400 450 500 550 600
VG828 15 Steel .500-.750
Copper
15. Special knives and stops may be required.
Shouldered
Steel
AWWA
Refuse-to-Fuse™ Field Fabrication
Cut Grooving Tool for HDPE Pipe
Performance
High
CG3100, CG3300, CG3500 (HDPE)
Balancing
Hydronic
Download publication 24.06 for complete information
HDPE
• The tool mounts on the exterior pipe wall and cuts
and grooves the end of the pipe in a single operation
Aquamine™
PVC
• The CG3100 and CG3300 tools connect directly
to a 120 volt, 50/60 hertz, 20 amp power source
(An optional 220 volt, single phase, 50/60 hertz Grooved
PVC
VG VIC-GROOVER
AGS
Capacity
Steel
¾ 1 1¼ 1½ 2 2½ 3 3½ 4 5 6 8
Model Pipe Material 20 25 32 40 50 60 80 90 100 125 150 200
Steel 40 – 80
Copper
Stainless 40 – 80
VG Aluminum1 40 – 80
PVC Plastic 40 – 80
Shouldered
Pipe 4 4½ 5 6 8 10 12
Model Material 100 120 125 150 200 250 300
Steel 40 – 80
VG412
Tools
O-Rings
Design
Data
OGS
VPG26
AGS
Download publication 24.01 for complete information
VBSP
rotation of the tool around the pipe
• Rotation Drive: Manual (clockwise)
Hole Cut
• Power Requirements: 110 volt, single phase,
60 hertz, 7 amp
Expansion
Weight: 41 lbs. | 19 kg
Joints
•
Plain End
Tool Ratings — Maximum
Pipe Size (in | mm) / Schedule
Pipe Size Capacity
2 2½ 3 3½ 4 5 6
Model Pipe Material
Stainless
50 60 80 90 100 125 150
Steel
VPG26 PVC Plastic 40 – 80
Copper
Shouldered
Steel
AWWA
Cut Grooving Tools for Plastic Pipe
VPG824
Performance
High
Download publication 24.01 for complete information
Balancing
Hydronic
• Features a high speed, router-type tool bit which
cuts a radial groove, to full depth, in one manual
rotation of the tool around the pipe
HDPE
• Rotation Drive: Manual (clockwise)
• Power Requirements: 110 volt, single phase,
Aquamine™
60 hertz, 7 amp
PVC
• Weight: 47 lbs. | 21 kg
Grooved
PVC
8 10 12 14 16
Model Pipe Material
200 250 300 350 400
VPG824 PVC Plastic 40 – 80
Tools
Seals and
Gaskets,
O-Rings
Design
Data
APG
AGS
secured pipe
Joints
and drained
• Weight: 13 lbs. | 5.9 kg
Stainless
Steel
Copper
Shouldered
Steel
AWWA
60 hertz, 7 amp
• Weight: 23 lbs. | 10 kg
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
OGS
VHCT900
AGS
Download publication 24.01 for complete information
VBSP
Vic-Let, and Vic-O-Well outlets
• Base unit clamps quickly onto the pipe in vertical,
Hole Cut
horizontal or overhead positions
• Available extended chain for
10 – 24" | DN250 – DN600 pipe
Expansion
Joints
• Power Requirements: Grounded 120 volt, single
phase, 60 hertz, 10 amp electrical supply (220 volt,
Plain End
single phase, 60 hertz, 5 amp available on request)
• Weight: 36 lbs. | 16 kg
Stainless
Steel
Copper
Shouldered
Steel
AWWA
Hole Cutting Tools
VIC-TAP II
Performance
High
Download publication 24.01 for complete information
Balancing
Hydronic
• Hole cutting tool including Style 931 Vic-Tap II
Mechanical-T unit for tapping into steel
pipe systems under pressure up to
500 psi | 3447 kPa | 34 bar
HDPE
• Hole size 23⁄8" | 60.5 mm
Aquamine™
• Power Requirements: 115 volt, single phase,
PVC
60 hertz, 7.5 amp
• Weight: Grooved
Drill guide base: 15 lbs. | 6.8 kg; Drill motor and
PVC
8" | DN200 available)
• Standard Capability: 4 – 8" | DN100 – DN200
Run outlet only × 2½" | DN65 (IPS) Outlet
Tools
Seals and
Gaskets,
O-Rings
Design
Data
VCT1 MANUAL
AGS
thick
• Worm gear drive crank handle provides smooth,
Hole Cut
• Weight: 22 lbs. | 10 kg
Stainless
Steel
Copper
Shouldered
Steel
AWWA
• Weight: 33 lbs. | 15 kg
Tools
Seals and
Gaskets,
O-Rings
Design
Data
Vic-Press™ Tools
OGS
PFT510
AGS
Download publication 24.01 for complete information
VBSP
• Tool package includes:
(1) PFT510 tool,
Hole Cut
(2) 18V Lithium Ion batteries,
(1) battery charger,
(1) tool carrying case,
Expansion
Joints
(1) jaw carrying case,
(1) each of jaws sized ½" | DN15, ¾" | DN20,
1" | DN25, 1½" | DN40, and 2" | DN50, and
Plain End
(1) adapter jaw
• Not compatible with PFT505 and/or PFT509
tools/components
Stainless
Steel
• Power Requirements: Battery pack 110 volt,
60 cycle, 6.5 amp (optional 220 volt)
Copper
• Weight: 21 lbs. | 9.5 kg
(PFT510 with 1" | DN25 jaw)
Shouldered
Steel
AWWA
Tool Accessories
VPD752 POWER DRIVE
Performance
High
Download publication 24.01 for complete information
Balancing
Hydronic
• Can be used as the power drive unit for the VE226,
VE26, VE206, VE46, VE416FS and VE272SFS roll
grooving tools provided each tool is equipped with
the correct base plate and the VG, VG28GD,
HDPE
and VG824 tools, with universal drive shaft
• Operated with a safety foot switch
Aquamine™
PVC
• Power Requirements: 115 volts, 15 amp, 50/60 hertz
(220 volt, 6 amp, 50/60 cycle option)
Grooved
• Weight: 140 lbs. | 634 kg
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
Tool Accessories
OGS
POWER MULE II
AGS
Tool Accessories
VAPS112 ADJUSTABLE PIPE STAND
Performance
High
•
• Load rating: 1,075 lbs. | 490 kg
Grooved
O-Rings
Design
Data
Tool Accessories
OGS
VAPS224 ADJUSTABLE PIPE STAND
AGS
Download publication 24.01 for complete information
VBSP
• Self-standing, heavy-duty unit permits free pipe
rotation and traversing on ball transfers
Hole Cut
• Capacity: 2 – 24" | DN50 – DN600 pipe
• Load rating: 1,800 lbs. | 816 kg
Expansion
Joints
• Vertical stroke: 23" | 584 mm
• Minimum pipe height from floor 13" | 325 mm
Plain End
on 24" | DN600 pipe
• Maximum pipe height from floor 38" | 965 mm
on 2" | DN50 pipe
Stainless
Steel
• Weight: 260 lbs. | 118 kg
Copper
Shouldered
Steel
AWWA
Tool Accessories
VAPS1672 ADJUSTABLE PIPE STAND
Performance
High
Download publication 24.01 for complete information
Balancing
Hydronic
• Designed specifically for supporting pipe
to be roll grooved
• Self-standing, heavy duty unit permits free pipe
HDPE
rotation and traversing on ball transfers
• Designed for use with VE436MC and VE460 tools
Aquamine™
Capacity: 16 – 72" | DN400 – DN1800 pipe
PVC
•
• Load rating: 10,000 lbs. | 4535 kg
Grooved
• Vertical Stroke: 17" | 425 mm
PVC
•
Seals and
Gaskets,
O-Rings
Design
Data
Tool Accessories
OGS
to be roll grooved
• Self-standing, heavy duty unit permits free pipe
rotation and traversing on ball transfers
VBSP
•
Steel
Tool Accessories
PT100A, PT101 AND PT102A
Performance
High
O-Rings
Tool Accessories
OGS
GROOVE DIAMETER CABLES FOR COPPER TUBING
Go/No-Go pocket-sized groove diameter cables
AGS
for taking circumferential measurements
of copper tubing
• GDC-CTS cable should only be used to check
VBSP
roll-grooved tubing to CTS Standard Types K, L,
M hard-drawn copper tubing per ASTM B-88
Hole Cut
and DMV per ASTM B-306 specifications
(2 – 8" | 54.0 – 206.4 mm tubing sizes)
• GDC-EC cable should only be used to check
Expansion
Joints
roll-grooved tubing to European Standard
EN 1057 R250 (Half-Hard) specifications
(54 – 159 mm tubing sizes).
Plain End
• GDC-AC cable should only be used to check
roll-grooved tubing to Australian Standard AS 1432
Types A, B and D copper tubing specifications
Stainless
Steel
(50 – 200 mm tubing sizes)
Copper
GROOVE DIAMETER CABLE FOR STRENGTHIN™ 100
SYSTEM FOR THIN WALL STAINLESS STEEL
Go/No-Go pocket-sized groove diameter cables are
Shouldered
Steel
available for taking circumferential measurements on
stainless steel pipe in sizes 2 – 12" | DN50 – DN300
• GDC-STRENGTHIN100 cable should only be used
AWWA
to check roll grooved pipe conformance to Victaulic
StrengThin™ 100 groove diameter specifications
Performance
• To ensure proper grooving dimensions, always refer
High
to the I-E497 StrengThin 100 Installation instructions
or to the latest groove specifications publications
Balancing
Hydronic
located on www.victaulic.com
HDPE
Aquamine™
PVC
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
Tool Accessories
OGS
• Weight: 4 lbs. | 2 kg
Hole Cut
Expansion
Joints
Plain End
Stainless
Steel
Copper
Shouldered
Steel
AWWA
•
can be ordered separately
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
OGS
LARGE RING CLAMP
SMALL RING CLAMP
AGS
Download publication 15.02 for complete information
VBSP
by coupling, please download individual coupling
product publications
Hole Cut
Expansion
Joints
Plain End
Stainless
Steel
Copper
Shouldered
Steel
AWWA
Victaulic® Bolted Split-Sleeve
Products (VBSP) Closure Tools
Performance
High
CTM-01 SMALL MANUAL TOOL
CTM-02 LARGE MANUAL TOOL
Balancing
Hydronic
CTH-01 SMALL 10-TON HYDRAULIC TOOL
CTH-02 LARGE 25-TON HYDRAULIC TOOL
HDPE
• For specific information on the appropriate tool
by coupling, please download individual coupling
Aquamine™
PVC
product publications
Grooved
PVC
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
Fabrication Cell
OGS
VAP131
AGS
transfers
Joints
Plain End
Stainless
Steel
Copper
Shouldered
Steel
AWWA
Fabrication Cell
VAPS 131R HYDRAULIC ADJUSTABLE PIPE STAND
Performance
High
• Weight: 500 lbs. | 227 kg
Seals and
Gaskets,
O-Rings
Design
Data
Fabrication Cell
OGS
VAPS 131F HYDRAULIC POSITIONER
AGS
Download publication 24.01 for complete information
VBSP
VAPS 131T Assembly Table
• Foot control provided for hands-free operation
Hole Cut
• Swivel caster wheel design for better mobility
• Capacity: 4 – 24" | DN100 – DN600 pipe;
Expansion
load rating: 1200 lbs. | 544 kg with wheels installed,
Joints
2000 lbs. | 907 kg without wheels
• Vertical stroke: 29.25" | 743 mm
Plain End
• Power Requirements: 230 volt, 6 amp, 50 hertz
(120 volt, 12 amp, 60 hertz option available)
Stainless
Weight: 400 lbs. | 181 kg
Steel
•
Copper
Shouldered
Steel
AWWA
Fabrication Cell
VAPS 131T ASSEMBLY TABLE
Performance
High
Download publication 24.01 for complete information
Balancing
Hydronic
• Designed to support grooved pipe, valves, and
fittings when used in conjunction with VAPS 131F
Hydraulic Positioner
HDPE
• Ball transfer assemblies can be positioned to
accommodate pipe from 2 – 24" | DN50 – DN600
Aquamine™
• Capacity: 4 – 24" | DN100 – DN600 pipe;
PVC
load rating: 8000 lbs. | 3629 kg,
ball transfers load rating 700 lbs. | 318 kg
Grooved
• Vertical stroke: 29.25" | 743 mm
PVC
• Weight: 500 lbs. | 227 kg
FRP
Tools
Seals and
Gaskets,
O-Rings
Design
Data
Plain End Plain End for HDPE Pipe Double Grooved IPS to HDPE Transition
for HDPE Pipe
Aquamine™
PVC
Grooved
PVC
unpressed pressed
Vic-Press for Schedule
™
Victaulic Bolted Split-Sleeve Shouldered Steel System
10S Stainless Steel Products (VBSP)
FRP
Tools
Seals and
Gaskets,
OGS
Victaulic offers a wide variety of synthetic rubber gaskets for Grade “E” EPDM, Grade “E” Vic-Plus, Grade “E2”, Grade
a broad range of applications. For most water applications, “EHP” and Grade “EHP” Vic-Plus gaskets are UL Classified
the Victaulic® Grade “E” EPDM (ethylene propylene diene in accordance with ANSI/NSF 61 for cold (+73°F | +23°C) and
AGS
monomer) gasket compound is compatible. Victaulic Grade “E” hot (+180°F | +82°C) potable water service and ANSI/NSF 372.
material has premium performance properties with respect to Download publication 02.06 for more details.
aging and resistance to heat and hot water. Heat aging tests at
Victaulic Grade “M” halogenated butyl gasket material (which is
VBSP
+250°F | +121°C conducted on this material show essentially no
typically used with our AWWA sized products) is UL Classified in
change in physical properties. This situation is further enhanced
accordance with ANSI/NSF 61 for cold (+86°F | +30°C) potable
when this rubber is subjected to an essentially non-oxidative
water service and ANSI/NSF 372. Download publication 02.06
Hole Cut
environment, such as a gasket in a water piping system.
for more details.
For example, aging tests in a non-oxidative atmosphere show
essentially no change in physical properties of this material Vic-Press™ Schedule 10S couplings and fittings: UL Classified
even when tested at temperatures up to +350°F | +177°C. in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot
Expansion
Joints
+180°F | +82°C potable water service with "E" and "H" o-rings and
Since water has no deteriorating effect on the elastomer,
ANSI/NSF 372. Download publication 02.06 for more details.
temperature is the only limiting factor to be considered in
determining the life expectancy of the elastomer in water service. In addition to the above, the standard black asphalt coating used
Plain End
The superior performance of the Grade “E” elastomer permits its on our cement lined AWWA size fittings is NSF 61 Listed. As the
use for hot water service up to +230°F | +110°C. The Grade “E” coating is the only material that comes in contact with the water,
gasket is superior to previous gasket materials by all performance NSF 61 compliant coatings are commercially available and may
barometers, including high and low temperature limits, tensile
Stainless
be applied to our products. For more details about Victaulic
Steel
strength, chemical resistance and shelf life. gasket construction and testing, download publication 05.01.
Copper
Victaulic offers a variety of synthetic rubber gaskets/seals/o-rings Thorough lubrication of the gasket exterior, including the lips
for the widest range of applications. To assure the maximum life and/or pipe ends and housing interiors, is essential for proper
Shouldered
for the service intended, proper gasket selection and specification installation. Use Victaulic Lubricant for installation. Other
Steel
in ordering is essential. The foremost consideration is temperature, compatible material, such as silicone and others may be used
along with concentration of product, duration of service and on Grades “E” or “L” gaskets. Victaulic Lubricant is available
continuity of service. Temperatures beyond the compatibility in a box of (12) 4 fluid ounce | 114 milliliter tubes or in
AWWA
limits have a degrading effect on the polymer. 1 quart | 946 milliliters containers.
Services listed are General Service Guidelines only. It should ALWAYS USE LUBRICANT FOR PROPER COUPLING ASSEMBLY.
Performance
be noted that there are services for which these gaskets/seals/
High
o-rings are not compatible. Reference should always be made
to the latest Gasket Chemical Services Guide (download Valve Seals
publication GSG-100) for specific service guidelines and for
Victaulic Gasket Selection Guide (05.01) does not include
Balancing
Hydronic
a listing of services which are not compatible.
Victaulic seals for valves. Refer to the individual Victaulic valve
Gasket guidelines apply only to Victaulic gaskets, seals and publication for information on the seals available for each valve.
o-rings. Guidelines for a particular service do not necessarily
imply compatibility of the coupling housing, related fittings or
HDPE
other components for the same service.
These guidelines do not apply to rubber-lined or rubber seal
Aquamine™
valves or other rubber-lined products. Victaulic gaskets are
PVC
clearly marked as part of the mold with the gasket size, style
and compound for easy identification.
Grooved
PVC
FRP
WARNING
Tools
• To assure maximum life for the service intended, proper gasket selection and specification in ordering is
essential. For specific chemical and temperature compatibility, refer to the Gasket Selection and Chemical
Seals and
Gaskets,
O-Rings
Services sections. The information shown defines general ranges for all compatible fluids.
Failure to select the proper rubber compound may result in personal injury or property d
amage, improper
installation, joint leakage or joint failure.
Design
Data
Introduction Notice
OGS
This Victaulic General Catalog has been written for the piping The technical and performance data, weights, dimensions
system installer, designer, specification writer and owner as a and specifications published in this catalog supersede all
basic reference guide for data about Victaulic® mechanical piping previously published data.
AGS
on pg. i, for a fully detailed index, see pg. 147. For more detailed
incurring obligation.
information, download Design Data 26.01.
For the most up-to-date Victaulic product information,
Hole Cut
pipe grooved to meet Victaulic groove specifications and Victaulic intended application. It is not intended as a substitute for
Joints
grooved end fittings, valves, and related grooved end components competent, professional assistance which is an obvious
only. They are not intended for use with plain end pipe and/or requisite to any specific application.
fittings. Victaulic plain end couplings are designed for use only with
Plain End
plain end or beveled end steel pipe (unless otherwise indicated) and
Victaulic plain end fittings. Victaulic plain end couplings must not Design
be used with grooved end or threaded end pipe and/or fittings.
Nor are they intended for use with Advanced Groove System (AGS) Reference should always be made to design information available
Stainless
is based on proper pipe preparation. The proper gasket must be special conditions, code requirements and use of safety factors.
selected for the service intended. It should be noted that there are Qualified engineers must make these decisions.
various services for which Victaulic gaskets are not recommended.
Shouldered
Reference should always be made to the latest Victaulic Gasket While every effort has been made to ensure its accuracy,
Steel
Selection Guide (download publication 05.01) for specific gasket Victaulic, its subsidiaries and affiliated companies, make no
service recommendations and for a listing of services which express or implied warranty of any kind respecting the information
are not recommended. Gaskets for Victaulic products always must contained in this catalog or the material referred to herein.
AWWA
be lubricated for proper assembly. Gasket lubricant must meet Anyone making use of the information or material contained
manufacturer’s specifications. Thorough lubrication of the gasket herein does so at their own risk and assumes any and all liability
exterior, including the lips and/or pipe ends and housing interiors, resulting from such use.
Performance
Victaulic specifications. Use of these tools is recommended in Reference should always be made to the specific Victaulic Field
preparing pipe to receive Victaulic products. Always read and Installation Handbook or Manual for the product you are installing.
understand the Tool Operating Instructions supplied with every
Victaulic tool prior to using any tools. All data contained herein, Handbooks and Manuals are included with each shipment of
Victaulic products for complete installation and assembly data,
HDPE
O-Rings
Design
Data
146G-103 REV A
victaulic.com
Intro
Index
Original Groove System XL (Extended Life) Restrained Flexible Coupling Mechanical-T Bolted
OGS
(OGS) System for Rubber-lined for Stainless Steel Pipe 39 Branch Outlet
Abrasive Services 28 Restrained Flexible Single- for Stainless Steel 57
Automatic Air
Zero-Flex Rigid Coupling 4
™
Gasket Coupling for Plug Valves 62
Release Valves 22
Carbon Steel Pipe 40
AGS
Rigid Coupling 55
Ball Valve 17
Restrained Flexible Single- StrengThin 100
Brass Body Ball Valve — Advanced Groove System Gasket Coupling for Butterfly Valve 67
Threaded 17 (AGS) Stainless Steel Pipe 40 Expansion Joint 67
VBSP
AGS Fittings 33
Delta-Y Valve Assembly 19 Mechanical-T Bolted StrengThin
AGS Flexible Coupling 31 High-Pressure Coupling 65
Discharge Vibration Branch Outlet and
AGS Rigid Coupling 31 Cross Assemblies 42 High-Pressure Fittings 65
Expansion
Knife Gate Valves 19 Coupling System 32 Mover Expansion Joint 46 Schedule 10S Stainless
Mover Expansion Joint 13 AGS Vic-Strainer Tee Type 36 Non-Restrained Flexible Steel Type 316 64
Outlet Coupling 5 AGS Vic-Strainer Wye Type 3 6 Expansion Coupling Vic-300 MasterSeal
for Carbon Steel Pipe 47
AWWA
Snap-Joint™ Coupling 5
Victaulic Bolted Stainless Steel Bellow Copper System
Strainer Vibration Expansion Joint 49
Split-Sleeve Products Butterfly Valve for Copper 74
Isolation Pump Drop 25 StrengThin™ 100
(VBSP)
Balancing
Hydronic
O-Rings
Shouldered Steel System Control Valve with Return Aquamine™ PVC System Field Fabrication
OGS
Temperature Controller 94 Roll Grooving Tools:
Flexible Coupling for Ball Valve 106 VE106/VE107 114
Differential Pressure
Shouldered Steel Pipe 76 Butterfly Valve 106 VE206 115
Controller:
Installation-Ready Flexible Female Threaded End 95 Fittings 105 VE270FSD/VE271FSD 117
AGS
Coupling for Shouldered Flanged End 95 VE272SFS 116
Plain End Coupling 104
Steel Pipe 76 Flanged End 95 VE416FS 118
PVC Pipe 106
Shouldered Butterfly Valve 78 VE416FSD/VE417FSD 119
ICSS Low Lead
VBSP
Transition Coupling VE450FSD 120
Shouldered Gate Valve 78 Balancing Valve 91 for PVC to Groove 104
Shouldered Steel Fittings 77 Field Portable
KOIL-KIT ™: Transition Coupling Roll Grooving Tools:
Transition Coupling for Ball Valve/Union
Hole Cut
for PVC to HDPE 104 VE12 111
HDPE to Shouldered Combination 98
VE26 111
Steel 76 Coil Hose 98
VE26/46 Power
Coil Pack 96 Grooved PVC System
Expansion
Drive Kit 112
Coil Pack for Air
Joints
Composite Flexible VE46 112
AWWA System Handling Units 97
VE226 113
Coil Pack with ATC Coupling 107
AWWA C504 VE226 Power Drive Kit 113
and Bypass Options 97
Plain End
Butterfly Valve 83 Union Port Fitting 99 Groove Diameter Cables 138
AWWA Fittings 81– 82 Y-Strainer/Ball Valve FRP System Hole Cutting Tools:
Check Valve for AWWA 83 Combination 98 HCT908 131
Coupling for Fiberglass
Stainless
Coupling for AWWA Link Differential VHCT900 132
Steel
Reinforced Plastic Pipe 108
Ductile Iron Pipe 80 Pressure Sensor 96 VIC-TAP II 132
Non-Restrained Flexible
Transition Coupling Manual Balancing No. T-60 Test Cap Kit 139
Coupling for Fiberglass
for IPS to AWWA 80 Ball Valve 87 Reinforced Plastic Pipe 108 Pipe Cut-Off Tools
Copper
Vic-Flange Adapter Manual Balancing Valve: VCT1 133
for AWWA 80 Flanged End 88 VCT2 133
Grooved End 88 Pipe Preparation Tools Plant/Shop Fabrication
Shouldered
Vic-Plug Valve for AWWA 83
Steel
Solder End 87 Roll Grooving Tools:
Threaded End 87 Adjustable Pipe Stands RG5200i 125
Union Inlet 88 VAPS112 135 VE268 121
High Performance System
Pressure Independent VAPS224 136 VE414MC 122
AWWA
for Steam and Chemical VAPS270 137
Balancing and Control VE460 123
Services VAPS1672 136 VE872 124
Valves (PIBCV) 93
High Performance Rigid Aquamine™ Tool 131
Performance
TA Scope™ 99 Pipe Preparation
High
Coupling for Steam and Cut Grooving Tools Measuring Tapes 137
Terminal Balancing
Chemical Services 84 for Plastic Pipe Power Mule II 135
and Control Valve —
OGS-200 Grooved Female × Female 91 VPG26 130 Style 809 Ring Clamps 140
Balancing
Hydronic
End Fittings 84 VPG824 130
Terminal Balancing Valve VBSP Closure Tools 140
for Modulating Control — Fabrication Cell
Vic-Press™ Tool 134
Female × Female 92 VAP131 141
Hydronic Balancing VAPS 131F 142 Tool Carry Bag 139
HDPE
Solutions VAPS 131R 141 VPD752 Power Drive 134
Refuse-to-Fuse™ VAPS 131T 142
Automatic Balancing Valve:
HDPE System Field Fabrication
Aquamine™
Grooved End 91
Cut Grooving Tools:
PVC
Male × Female 90
Mechanical-T Spigot Outlet 43 CG3100 128
Threaded End 89
Plain End Installation-Ready™ CG3300 128
Automatic Balancing Valve CG3500 128
Refuse-to-Fuse Coupling Grooved
with Ball Valve Kit:
PVC
O-Rings
Design
Data
WHERE
Victaulic piping system products are VdS – Verband der LR – Lloyd’s Register SBCCI – Southern Building Code
OGS
tested and certified for a wide range Schadenverhütung GmBH of Shipping (UK) Congress International (USA)
of applications. Victaulic engages (Germany)
with many certifying authorities, RINA – Registro Italiano UPC – Uniform Plumbing
approval bodies, and standards VKF – Vereinigug Kantonaler Navale (Italy) Code (USA)
Feuerversicherungen (Switzerland)
AGS
organizations globally, and maintains USCG – US Coast Guard (USA)
product certifications and strict Zagrebinspekt (Croatia) Pressure Equipment Safety
compliance to applicable codes,
HVAC (97/23/EC) PED – Pressure
INNOVATION
standards, and directives, relevant
Potable Water Equipment Directive (Europe)
VBSP
to specific industries and markets.
CSTB – Centre Scientifique et
ÁNTSZ – Állami Technique du Bâtiment (France) CSA B51 – "Boiler, Pressure
Népegészségügyi És Tisztiorvosi Vessel, and Pressure Piping
PRODUCT CERTIFICATIONS: Szologálat (Hungary) ITB – Instytut Techniki Code" (Canada)
Hole Cut
Budowlanej (Poland)
Fire Protection ARPA – Agenzia Regionale per CRN – Canadian Registration
la Protezione dell’Ambiente (Italy) Sercons Europe BV (Russia) Number per CSA B51 (Canada)
ACTIVFIRE – ActivFire
DVGW – Deutscher Verein des
Expansion
Register of Fire Protection Plumbing
Joints
AND SOLUTIONS
Equipment (Australia) Gas- und Wasserfaches e.V. Chemical Safety / Recycling
(Germany) IAPMO – International
CCCF – China Certification (EC/1907/2006) REACH–
Eurofins – ACS : Attestation de Association of Plumbing & Registration, Evaluation,
Center for Fire Protection Mechanical Officials (USA)
Plain End
Products (China) Conformité Sanitaire (France) Authorization, and Registration
ICC-ES – International of Chemicals (Europe)
CFPSC – Chinese Fire Protection HZJZ – Croatian National
Institute of Public Health Code Council- Evaluation (2002/95/EC) RoHS –
Safety Center (Taiwan) Service (USA)
(Croatia) Restriction of Hazardous
Stainless
CNBOP – Centrum Substances Directive (Europe)
Steel
KWWA – Korea Water and NSF – NSF International (USA)
Naukowo-Badawcze Ochrony
ARE JOINED
Przeciwpozarowej (Poland) Wastewater Works Association WaterMark (Australia) (2002/96/EC) WEEE – Waste
Electrical and Electronic
CNPP – Centre National NSF – NSF International (USA) Equipment Directive (Europe)
Copper
de Prévention et de Protection ÖVGW – Österreichische
(France) Vereinigung für das Gas- Building Services
CTPC – Consiliul Technic und Wasserfach (Austria) COMPLIANCE:
Shouldered
Permanent Pentru Constructii (EU/305/2011) CPR –
PZH – Panstwowy Zaklad
Steel
(Romania) Construction Products Regulation-
Higieny (Poland) Codes and Standards Compliance Fire safety products (Europe)
cULus – Underwriter’s
TOGETHER
RUVZPP – Regionálny úrad ANSI – American National NBC – National Building
Laboratories, LLC (USA) verejného zdravotníctva so Standards Institute (USA) Code (Canada)
AWWA
EMI – Epitesugyi Minosegellenorzo sídlom v Poprade (Slovakia)
API – American Petroleum PSB – TUV SUD PSB
Innovacious (Hungary) SAI – SAI Global (Australia) Institute (USA) Singapore (Singapore)
Performance
FDNY – City of New York SPAN – Suruhanjaya APSAD – Assemblée Plenière
Fire Department (USA)
High
Perkhidmatan Air Negara Société Assurance Dommage Explosive Environments
FM – FM Approvals (USA) (Malaysia) (France)
(94/9/EC) ATEX – Equipment
HDB – Singapore Housing SVGW – Schweizerischer Verein AS/NZS – Standards Australia and protective systems for
Balancing
Hydronic
Development Board (Singapore) des Gas- und Wasserfaches and Standards New Zealand potentially explosive atmospheres
(Sweden) (AU & NZ) (Europe)
KFI – Korea Fire Industry
Technology Institute (Korea) UL – Underwriter’s Laboratories, ASTM – American Society for
LLC (USA) Testing and Materials (USA) Seismic
HDPE
LPCB – Loss Prevention
Certification Board (UK) WaterMark (Australia) AWWA – American Water OSHPD – Office of Statewide
Works Association (USA) Health Planning and
SBSC – Svensk Brand & Säkerhets WRAS – Water Regulations
Development (USA)
Aquamine™
Certifiering AB (Sweden) Advisory Scheme (UK) BOCA – Building Officials and
PVC
Code Administrators (USA)
TFRI – Tanjin Fire Research ZUOVA – ZDRAVOTNÍ
ÚSTAV se sídlem v Ostrave CSA – Canadian Standards Tools and Machinery
Institute of Ministry of Public
Security (China) (Czech Republic) Association (Canada) (2006/42/EC) MD – Machinery
Grooved
Directive (Europe)
PVC
TSU – Technický Skúšobný CSFM – California State
Ústav Pieštany, š.p. (Slovakia) Maritime Fire Marshal (USA)
FRP
GOST R – Gosstandart (Russia) © Copyright 2017, Victaulic ®
TZUS – Technický a Zkuševní BV – Bureau Veritas (France) Company. All rights reserved.
IPC – International Plumbing
Ústav Stavební Praha, s.p. CCG – Canadian Coast Code (USA)
(Czech Republic) No part of this Victaulic catalog
Guard (Canada) may be reproduced, stored in a
Tools
ISO – International Standards
UKRFIRESERT – State CRS – Croatian Register Organization (Global) retrieval system, or transmitted,
Certification Center (Ukraine) of Shipping (Croatia) in any form or by any means,
NACE – National Association electronic, mechanical, photocopy,
UL – Underwriter’s CCS – China Classification
Seals and
of Corrosion Engineers (USA) recording or otherwise, without
Gaskets,
O-Rings
Laboratories, LLC (USA) Society (China) the prior written permission
NFPA – National Fire Protection of Victaulic Company.
ULC – Underwriter’s DNV GL (Global) Association (USA)
Laboratories of Canada (Canada)
KRS – Korean Registry
Design
Data
of Shipping (Korea)
Index
North and South America Europe, Middle East, Africa and India Asia Pacific
GENERAL
CATALOG
UNITED STATES AND BELGIUM CHINA
WORLD HEADQUARTERS EUROPE HEADQUARTERS Unit 808, Building B
4901 Kesslersville Road Prijkelstraat 36 Hongwell International Plaza
Easton, PA 18040 USA 9810 Nazareth, Belgium No.1602 West Zhongshan Road
1 800 PICK VIC 32 9 381 15 00 Shanghai, China 200235
1 800 742 5842 49 6151 9573 0 86 21 6021 9400
(within North America) (within Germany) vicap@victaulic.com
1 610 559 3300
viceuro@victaulic.com
pickvic@victaulic.com KOREA
Effective February 2017
victaulic.com