You are on page 1of 1

Sl No Catalytic Converter Scrubber

Catalytic Converter uses catalyst to


extract Sox, Nox, HC,CO & PM Scrubber useschemical dosing to extract
01 the Sox, Nox to a collection tank at the
bottom, treated with Soda lime to form a
slug.
Two types of Catalytic converter Two types of Srubber
02 1. Reduction Type Catalyst 1. Wet type Scrubber
2. Oxidation Type Catalyst 2. Dry Type Scrubber

Catalytic converter consists of ceramic Limestone is being crushed, processed &


structure coated with a metal catalyst, turned into white powder, this powder is
metal may be Platinum, Rhodium OR mixed with water. This soluation absorbs
Palladium the sulphur content in gas, then this
03 solution becomes paste, which has to be
disposed later

Can be fitted in lieu of silencer. Fitted in the exhaust system with all
04 accessories outside the Dg set room.
Maintenance is very less as no moving Maintenace is Higher. Constant supply of
part, & it has to be completely replaced water, top up of lime soda time to time,
over a period of time. regular checks to access the system is
05 working properly.

Space required is similar to silencer. Designated space to be provided near DG


06 set / roof top to install the system &
accessories.

Separate Power source not required Separate power source required for
07 system to operate.

You might also like