Professional Documents
Culture Documents
Harsh Kumar On Customer Satisfaction
Harsh Kumar On Customer Satisfaction
1
2
ON
SUBMITED TO
IN
SUBMITED BY
BBA SEMESTER IV
BBA PROGRAMME
AGRA
MAY 2019
2
3
1) Preface
2) Acknowledgement
i. Research methodology
ii. Data collection
iii. Scope of the
iv. Limitations of the study
8) Marketing of company 23 - 27
i. Methodology
ii. Basic model
iii. Kano mode
iv. Customer coefficient
14) Questionnaire 45 - 47
3
4
PREFACE
Thus in order to survive in market one should have practical as well as theoretical
knowledge about all different fields existing I market
BBA education brings its students in direct contact with the real corporate world
through industrial training. The BBA program provides its students with an in depth
study of various managerial activities that are performed ion any organization.
4
5
ACKNOWLEDGE
Firstly we would like to thank almighty GOD, who bestowed upon us this opportunity for working
on this project and generated the capacity to successfully complete the project
We are extremely indebted to our project mentor Prof. Chandal Pal Singh for his valuable
suggestions and guidance. Which ensured an in-depth learning and understanding of the concepts.
His inputs from past experiences and practical interpretation of the problem helped us a lot in
comprehending the requirements of the project. This ensured great learning for us. He was always
helpful enough & was always able to take out some time of his busy schedule to guide us in this
project. Lastly we say we are lucky enough that we trained under his!
We would also like to extend our thanks to all the respondents who spared their valuable time and
helped us in filling up the questionnaire by providing the needed information. Lastly we would like
to thanks all of those who have helped to furnish this research successfully.
Lastly we would like to thank our parents for their moral support and our friends with whom we
shared our day-to-day experience and received lots of suggestions that improved my quality of
work.
5
6
2) To find out the factors that influence on customer when they purchasing Honda
4) To helps service provider of Honda to find out the satisfaction of customer with
respect to after sales services provided by Ratan Honda
RESEARCH METHODOLOGY
Research methodology is a systematical way to solve the research problem. In
this we studied various steps that are generally adopted by a researcher in
studying his research problem along with the logic behind them.
RESEARCH DESIGN :- The project is based on the descriptive and analytical research desi
SAMPLE DESIGN
SAMPLE UNIT:- the population involved in this project is the customer from the Agra district
SAMPLING TECHNIQUE :- Convenient sampling technique has been used for the study
Both primary and secondary data has been used to satisfy the objectives of the study
PRIMARY DATA :- The study is mainly based on primary data collected through a personal
interviews from the existing respondents own Honda two wheeler
SECONDRY DATA :- The data regarding company profile, industry profile etc. has been collected
from the by low of organization, office records and also information available on the web.
STATISTICAL TOOLS USED
6
7
PERCENTAGE ANALYSIS
The collected data was analysed by using percentage analysis method.
Percentage was calculated by taking the number of respondents for a particular parameter against
the total number of respondents. The answer for questions asked in the questionnaire were
tabulated and analysed using simple percentage.
When viewing the industrial sector we can see that all the corporate houses focusing on retaining
the customers without compromising on organizational objectives, ethics and values. Customers
are individuals and the organizations have to make each and every customer feel that they are
highly compassionate to them. Hence customer relationship management is having a wide scope in
modern world.
LIMITATIONS OF STUDY
The study was restricted only to Agra district area.
Many of the respondents have not given proper response
The information that is provided by the individual may be biased
Respondents were reluctant to disclose complete and correct information.
7
8
8
9
Introduction
9
10
History
Honda Motorcycle and Scooter India, Private Limited (HMSI) is the wholly owned Indian subsidiary
of Honda Motor Company, Limited, Japan.[2] Founded in 1999,[2] it was the fourth Honda
automotive venture in India, after Kinetic Honda Motor Ltd (1984-1998), Hero Honda (1984-2011)
and Honda Siel Cars India (1995-2012).[3] HMSI was established in 1999 at Manesar, District
Gurgaon, Haryana.
Currently HMSI has four manufacturing locations at Manesar in Haryana, Tapukara in Rajasthan,
Narsapura, Kolar in Karnataka and Vithalpur, NW of Ahmedabad.
Scooter -exclusive plant in Gujarat. Its facility in Narsapura is the largest amongst its four locations
and has a capacity of 6,600 vehicles per day. Honda India sales skyrocketed up to 4.28 million
motorcycles and scooters backed by scooterization of India via bestselling scooter Activa over
350,000 scooter sales in September 2017. Honda scooter Activa sales record expected 3.5million
scooters in 2017/18. Honda motorcycle & scooter started independent operation since 2010s after
separation from Hero Honda motors J/V since 1984. 6million production capacity establishment
within 7 years record in India, Top world motorcycle market.
Honda Motor Company, Ltd. (Japanese: 本田技研工業株式会社 Hepburn: Honda Giken Kōgyō KK,
IPA: [honda] (About this soundlisten); /ˈhɒndə/) is a Japanese public multinational conglomerate
corporation primarily known as a manufacturer of automobiles, aircraft, motorcycles, and power
equipment.
Honda has been the world's largest motorcycle manufacturer since 1959,[2][3] as well as the
world's largest manufacturer of internal combustion engines measured by volume, producing more
than 14 million internal combustion engines each year.[4] Honda became the second-largest
Japanese automobile manufacturer in 2001.[5][6] Honda was the eighth largest automobile
manufacturer in the world in 2015.[7]
Honda was the first Japanese automobile manufacturer to release a dedicated luxury brand, Acura,
in 1986. Aside from their core automobile and motorcycle businesses, Honda also manufactures
garden equipment, marine engines, personal watercraft and power generators, and other products.
Since 1986, Honda has been involved with artificial intelligence/robotics research and released their
ASIMO robot in 2000. They have also ventured into aerospace with the establishment of GE Honda
Aero Engines in 2004 and the Honda HA-420 HondaJet, which began production in 2012. Honda has
three joint-ventures in China (Honda China, Dongfeng Honda, and Guangqi Honda).
10
11
In 2013, Honda invested about 5.7% (US$6.8 billion) of its revenues in research and
development.[8] Also in 2013, Honda became the first Japanese automaker to be a net exporter
from the United States, exporting 108,705 Honda and Acura models, while importing only 88,357.
Honda's foray into four wheelers started with Honda T360 in 1963
Throughout his life, Honda's founder, Soichiro Honda, had an interest in automobiles. He worked as
a mechanic at the Art Shokai garage, where he tuned cars and entered them in races. In 1937, with
financing from his acquaintance Kato Shichirō, Honda founded Tōkai Seiki (Eastern Sea Precision
Machine Company) to make piston rings working out of the Art Shokai garage. After initial failures,
Tōkai Seiki won a contract to supply piston rings to Toyota, but lost the contract due to the poor
quality of their products. After attending engineering school without graduating, and visiting
factories around Japan to better understand Toyota's quality control processes, by 1941 Honda was
able to mass-produce piston rings acceptable to Toyota, using an automated process that could
employ even unskilled wartime laborers.
Tōkai Seiki was placed under control of the Ministry of Commerce and Industry (called the Ministry
of Munitions after 1943) at the start of World War II, and Soichiro Honda was demoted from
president to senior managing director after Toyota took a 40% stake in the company.[10] Honda
also aided the war effort by assisting other companies in automating the production of military
aircraft propellers.[10] The relationships Honda cultivated with personnel at Toyota, Nakajima
Aircraft Company and the Imperial Japanese Navy would be instrumental in the postwar period.[10]
A US B-29 bomber attack destroyed Tōkai Seiki's Yamashita plant in 1944, and the Itawa plant
collapsed in 13 January 1945 Mikawa earthquake. Soichiro Honda sold the salvageable remains of
the company to Toyota after the war for ¥450,000, and used the proceeds to found the Honda
Technical Research Institute in October 1946.[10][12]
With a staff of 12 men working in a 16 m2 (170 sq ft) shack, they built and sold improvised
motorized bicycles, using a supply of 500 two-stroke 50 cc Tohatsu war surplus radio generator
engines.[10][11]:19[13] When the engines ran out, Honda began building their own copy of the
Tohatsu engine, and supplying these to customers to attach to their bicycles.[10][13] This was the
Honda A-Type, nicknamed the Bata Bata for the sound the engine made.[10] In 1949, the Honda
Technical Research Institute was liquidated for ¥1,000,000, or about US$5,000 today; these funds
were used to incorporate Honda Motor Co., Ltd.[11]:21 At about the same time Honda hired
engineer Kihachiro Kawashima, and Takeo Fujisawa who provided indispensable business and
marketing expertise to complement Soichiro Honda's technical bent.[11]:21 The close partnership
between Soichiro Honda and Fujisawa lasted until they stepped down together in October 1973.
The first complete motorcycle, with both the frame and engine made by Honda, was the 1949 D-
Type, the first Honda to go by the name Dream.[12][14] Honda Motor Company grew in a short
time to become the world's largest manufacturer of motorcycles by 1964.[citation needed]
The first production automobile from Honda was the T360 mini pick-up truck, which went on sale in
August 1963.[15] Powered by a small 356-cc straight-4 gasoline engine, it was classified under the
11
12
cheaper Kei car tax bracket.[16] The first production car from Honda was the S500 sports car, which
followed the T360 into production in October 1963. Its chain-driven rear wheels pointed to Honda's
motorcycle origins.
Over the next few decades, Honda worked to expand its product line and expanded operations and
exports to numerous countries around the world. In 1986, Honda introduced the successful Acura
brand to the American market in an attempt to gain ground in the luxury vehicle market. The year
1991 saw the introduction of the Honda NSX supercar, the first all-aluminum monocoque vehicle
that incorporated a mid-engine V6 with variable-valve timing
CEO Tadashi Kume was succeeded by Nobuhiko Kawamoto in 1990. Kawamoto was selected over
Shoichiro Irimajiri, who oversaw the successful establishment of Honda of America Manufacturing,
Inc. in Marysville, Ohio. Irimajiri and Kawamoto shared a friendly rivalry within Honda; owing to
health issues, Irimajiri would resign in 1992.
Following the death of Soichiro Honda and the departure of Irimajiri, Honda found itself quickly
being outpaced in product development by other Japanese automakers and was caught off-guard
by the truck and sport utility vehicle boom of the 1990s, all which took a toll on the profitability of
the company. Japanese media reported in 1992 and 1993 that Honda was at serious risk of an
unwanted and hostile takeover by Mitsubishi Motors, which at the time was a larger automaker by
volume and was flush with profits from its successful Pajero and Diamante models.[19]
Kawamoto acted quickly to change Honda's corporate culture, rushing through market-driven
product development that resulted in recreational vehicles such as the first-generation Odyssey
and the CR-V, and a refocusing away from some of the numerous sedans and coupes that were
popular with the company's engineers but not with the buying public. The most shocking change to
Honda came when Kawamoto ended the company's successful participation in Formula One after
the 1992 season, citing costs in light of the takeover threat from Mitsubishi as well as the desire to
create a more environmentally friendly company image.[20]
The Honda Aircraft Company was established in 1995, as a wholly owned subsidiary; its goal was to
produce jet aircraft under Honda's name.[21]
On 23 February 2015, Honda announced that CEO and President Takanobu Ito would step down
and be replaced by Takahiro Hachigo by June; additional retirements by senior managers and
directors were expected.[22]
The company has assembly plants around the globe. These plants are located in China, the United
States, Pakistan, Canada, England, Japan, Belgium, Brazil, México, New Zealand, Malaysia,
Indonesia, India, Philippines, Thailand, Vietnam, Turkey, Taiwan, Perú and Argentina. As of July
2010, 89 percent of Honda and Acura vehicles sold in the United States were built in North
American plants, up from 82.2 percent a year earlier. This shields profits from the yen's advance to
a 15-year high against the dollar.[23]
12
13
Honda's Net Sales and Other Operating Revenue by Geographical Regions in 2007[24]
American Honda Motor Company is based in Torrance, California. Honda Racing Corporation (HRC)
is Honda's motorcycle racing division. Honda Canada Inc. is headquartered in Markham,
Ontario,[25] it was originally planned to be located in Richmond Hill, Ontario, but delays led them
to look elsewhere. Their manufacturing division, Honda of Canada Manufacturing, is based in
Alliston, Ontario. Honda has also created joint ventures around the world, such as Honda Siel Cars
and Hero Honda Motorcycles in India,[26] Guangzhou Honda and Dongfeng Honda in China, Boon
Siew Honda in Malaysia and Honda Atlas in Pakistan.
Following the Japanese earthquake and tsunami in March 2011 Honda announced plans to halve
production at its UK plants.[27] The decision was made to put staff at the Swindon plant on a 2-day
week until the end of May as the manufacturer struggled to source supplies from Japan. It's
thought around 22,500 cars were produced during this period.
For the fiscal year 2018, Honda reported earnings of US$9.534 billion, with an annual revenue of
US$138.250 billion, an increase of 6.2% over the previous fiscal cycle. Honda's shares traded at over
$32 per share, and its market capitalization was valued at US$50.4 billion in October 2018.[28]
Year Revenue
in mil. USD$ Net income
in mil. USD$ Total Assets
in mil. USD$ Employees
2005 77,851 4,376 83,853
2006 89,172 5,373 95,145
2007 99,784 5,331 108,329
2008 108,026 5,400 113,540
2009 100,112 1,370 118,189
2010 92,655 3,052 125,594
2011 107,242 6,762 138,851
2012 100,941 2,820 149,616
2013 119,523 4,443 164,988 190,338
2014 118,425 5,741 156,220 198,561
2015 121,286 4,636 167,675 204,730
2016 121,190 2,860 151,303 208,399
2017 130,193 5,734 176,311 211,915
2018 138,250 9,534 174,143 215,638
Leadership
13
14
Name Years
Soichiro Honda 1948–1973
Kiyoshi Kawashima 1973–1983
Tadashi Kume 1983–1990
Nobuhiko Kawamoto 1990–1998
Hiroyuki Yoshino 1998–2003
Takeo Fukui 2003–2009
Takanobu Ito 2009–2015
Takahiro Hachigo 2015–
Motorcycles
For a list of motorcycle products, see List of Honda motorcycles.
Honda is the largest motorcycle manufacturer in Japan and has been since it started production in
1955.[10] At its peak in 1982, Honda manufactured almost three million motorcycles annually. By
2006 this figure had reduced to around 550,000 but was still higher than its three domestic
competitors.[10]
In 2017, India became the largest motorcycle market of Honda.[35] In India, Honda is leading in the
scooters segment, with 59 percent market share.[36]
During the 1960s, when it was a small manufacturer, Honda broke out of the Japanese motorcycle
market and began exporting to the U.S. Working with the advertising agency Grey Advertising,
Honda created an innovative marketing campaign, using the slogan "You meet the nicest people on
a Honda." In contrast to the prevailing negative stereotypes of motorcyclists in America as tough,
antisocial rebels, this campaign suggested that Honda motorcycles were made for the everyman.
The campaign was hugely successful; the ads ran for three years, and by the end of 1963 alone,
Honda had sold 90,000 motorcycles.[11]:{{{1}}}
Taking Honda's story as an archetype of the smaller manufacturer entering a new market already
occupied by highly dominant competitors, the story of their market entry, and their subsequent
huge success in the U.S. and around the world, has been the subject of some academic controversy.
Competing explanations have been advanced to explain Honda's strategy and the reasons for their
success.[37]
The first of these explanations was put forward when, in 1975, Boston Consulting Group (BCG) was
commissioned by the UK government to write a report explaining why and how the British
motorcycle industry had been out-competed by its Japanese competitors. The report concluded
that the Japanese firms, including Honda, had sought a very high scale of production (they had
made a large number of motorbikes) in order to benefit from economies of scale and learning curve
effects. It blamed the decline of the British motorcycle industry on the failure of British managers to
invest enough in their businesses to profit from economies of scale and scope.[38]
14
15
The second explanation was offered in 1984 by Richard Pascale, who had interviewed the Honda
executives responsible for the firm's entry into the U.S. market. As opposed to the tightly focused
strategy of low cost and high scale that BCG accredited to Honda, Pascale found that their entry
into the U.S. market was a story of "miscalculation, serendipity, and organizational learning" – in
other words, Honda's success was due to the adaptability and hard work of its staff, rather than any
long term strategy.[39] For example, Honda's initial plan on entering the US was to compete in
large motorcycles, around 300 cc. Honda's motorcycles in this class suffered performance and
reliability problems when ridden the relatively long distances of the US highways.[11]:41–43 When
the team found that the scooters they were using to get themselves around their U.S. base of San
Francisco attracted positive interest from consumers that they fell back on selling the Super Cub
instead.[11]:41–43
The most recent school of thought on Honda's strategy was put forward by Gary Hamel and C. K.
Prahalad in 1989. Creating the concept of core competencies with Honda as an example, they
argued that Honda's success was due to its focus on leadership in the technology of internal
combustion engines.[40] For example, the high power-to-weight ratio engines Honda produced for
its racing bikes provided technology and expertise which was transferable into mopeds. Honda's
entry into the U.S. motorcycle market during the 1960s is used as a case study for teaching
introductory strategy at business schools worldwide.
Soichiro Honda, being a race driver himself, could not stay out of international motorsport. In 1959,
Honda entered five motorcycles into the Isle of Man TT race, the most prestigious motorcycle race
in the world. While always having powerful engines, it took until 1961 for Honda to tune their
chassis well enough to allow Mike Hailwood to claim their first Grand Prix victories in the 125 and
250 cc classes. Hailwood would later pick up their first Senior TT wins in 1966 and 1967. Honda's
race bikes were known for their "sleek & stylish design" and exotic engine configurations, such as
the 5-cylinder, 22,000 rpm, 125 cc bike and their 6-cylinder 250 cc and 297 cc bikes.
In 1979, Honda returned to Grand Prix motorcycle racing with the monocoque-framed, four-stroke
NR500. The FIM rules limited engines to four cylinders, so the NR500 had non-circular, 'race-track',
cylinders, each with 8 valves and two connecting rods, in order to provide sufficient valve area to
compete with the dominant two-stroke racers. Unfortunately, it seemed Honda tried to accomplish
too much at one time and the experiment failed. For the 1982 season, Honda debuted their first
two-stroke race bike, the NS500 and in 1983, Honda won their first 500 cc Grand Prix World
Championship with Freddie Spencer. Since then, Honda has become a dominant marque in
motorcycle Grand Prix racing, winning a plethora of top level titles with riders such as Mick Doohan
15
16
and Valentino Rossi. Honda also head the number of wins at the Isle of Man TT having notched up
227 victories in the solo classes and Sidecar TT,[61] including Ian Hutchinson's clean sweep at the
2010 races.[62]
The outright lap record on the Snaefell Mountain Course was held by Honda, set at the 2015 TT by
John McGuinness at an average speed of 132.701 mph (213.562 km/h) on a Honda CBR1000RR,[63]
bettered the next year by Michael Dunlop on a BMW S1000RR at 133.962 mph (215.591 km/h).[64]
In the Motocross World Championship, Honda has claimed six world championships. In the World
Enduro Championship, Honda has captured eight titles, most recently with Stefan Merriman in
2003 and with Mika Ahola from 2007 to 2010. In motorcycle trials, Honda has claimed three world
championships with Belgian rider Eddy Lejeune.
16
17
17
18
18
19
19
20
20
21
21
22
22
23
Marketing
Japanese marketing
23
24
Honda sells genuine accessories through a separate retail chain called Honda Access for both their
motorcycle, scooter and automobile products. In cooperation with corporate group partner
Pioneer, Honda sells an aftermarket line of audio and in-car navigation equipment that can be
installed in any vehicle under the brand name Gathers, which is available at Honda Access locations
as well as Japanese auto parts retailers, such as Autobacs. Buyers of used vehicles are directed to a
specific Honda retail chain that sells only used vehicles called Honda Auto Terrace.
In the spring of 2012, Honda in Japan introduced Honda Cars Small Store (Japanese) which is
devoted to compact cars like the Honda Fit, and kei vehicles like the Honda N-One and Honda S660
roadster.
International marketing
In 2004, they produced the Grrr advert, usually immediately followed by a shortened version of the
2005 Impossible Dream advert. In December 2005, Honda released The Impossible Dream a two-
minute panoramic advertisement filmed in New Zealand, Japan and Argentina which illustrates the
founder's dream to build performance vehicles. While singing the song "Impossible Dream", a man
reaches for his racing helmet, leaves his trailer on a minibike, then rides a succession of vintage
Honda vehicles: a motorcycle, then a car, then a powerboat, then goes over a waterfall only to
reappear piloting a hot air balloon, with Garrison Keillor saying "I couldn't have put it better myself"
as the song ends. The song is from the 1960s musical Man Of La Mancha, sung by Andy Williams.
In 2006, Honda released its Choir advertisement, for the UK and the internet. This had a 60-person
choir who sang the car noises as film of the Honda Civic are shown.
In the mid to late 2000s in the United States, during model close-out sales for the current year
before the start of the new model year, Honda's advertising has had an animated character known
simply as Mr. Opportunity, voiced by Rob Paulsen. The casual looking man talked about various
deals offered by Honda and ended with the phrase "I'm Mr. Opportunity, and I'm knockin'",
followed by him "knocking" on the television screen or "thumping" the speaker at the end of radio
ads. In addition, commercials for Honda's international hatchback, the Jazz, are parodies of well-
known pop culture images such as Tetris and Thomas The Tank Engine.
In late 2006, Honda released an ad with ASIMO exploring a museum, looking at the exhibits with
almost childlike wonderment (spreading out its arms in the aerospace exhibit, waving hello to an
astronaut suit that resembles him, etc.), while Garrison Keillor ruminates on progress. It concludes
24
25
with the tagline: "More forwards please". Honda also sponsored ITV's coverage of Formula One in
the UK for 2007. However they had announced that they would not continue in 2008 due to the
sponsorship price requested by ITV being too high.
In May 2007, focuses on their strengths in racing and the use of the Red H badge – a symbol of
what is termed as "Hondamentalism". The campaign highlights the lengths that Honda engineers go
to in order to get the most out of an engine, whether it is for bikes, cars, powerboats – even
lawnmowers. Honda released its Hondamentalism campaign. In the TV spot, Garrison Keillor says,
"An engineer once said to build something great is like swimming in honey", while Honda engineers
in white suits walk and run towards a great light, battling strong winds and flying debris, holding on
to anything that will keep them from being blown away. Finally one of the engineers walks towards
a red light, his hand outstretched. A web address is shown for the Hondamentalism website. The
digital campaign aims to show how visitors to the site share many of the Hondamentalist
characteristics.
At the beginning of 2008, Honda released – the Problem Playground. The advert outlines Honda's
environmental responsibility, demonstrating a hybrid engine, more efficient solar panels and the
FCX Clarity, a hydrogen-powered car. The 90-second advert has large-scale puzzles, involving
Rubik's Cubes, large shapes and a 3-dimensional puzzle. On 29 May 2008, Honda, in partnership
with Channel 4, broadcast a live advertisement. It showed skydivers jumping from an aeroplane
over Spain and forming the letters H, O, N, D and A in mid-air. This live advertisement is generally
agreed to be the first of its kind on British television. The advert lasted three minutes.[113]
In 2009, American Honda released the Dream the Impossible documentary series, a collection of 5-
to 8-minute web vignettes that focus on the core philosophies of Honda. Current short films include
Failure: The Secret to Success, Kick Out the Ladder and Mobility 2088. They have Honda employees
as well as Danica Patrick, Christopher Guest, Ben Bova, Chee Pearlman, Joe Johnston and Orson
Scott Card. The film series plays at dreams.honda.com. In the UK, national television ads feature
voice-overs from American radio host Garrison Keillor, while in the US the voice of Honda
commercials is actor and director Fred Savage.
The Methodology
The research is segregated into two parts: (1). Kano Model analysis (2) Analysis of
the customer satisfaction in terms of major and supporting after sales services.With
reference to study made by Matzler and Hinterhuber (1998), Sauerwein and et.al
(1996), and Mustofa and Abebe (2012), we come up with the following ideas about
Kano Model.
Kano Model (1984) which was developed by Noriaki Kano and his colleagues to
categorize the attributes of a product or a service; based on how well they are able
to satisfy customers’ needs, is used to categories the major after sales service on
the basis of Threshold Attribute, Performance Attribute and Excitement Attribute.
25
26
Kano model states that the relationship between the performance of a product
attribute and satisfaction/ dissatisfaction level is not necessary linear. Some
attributes can be asymmetrically related with satisfaction/ dissatisfaction levels.
According to principle, product attributes are classified into one of the five
categories.
• Attractive: Those qualities that the customer is not expecting, but receives as a
bonus.
• One-dimensional: The better the companies are meeting these needs, the
happier the customers are
• Must be: The essential character of the product or service which must be
present at any cost, else the customer will go somewhere else.
• Indifferent: These attributes refers to aspects that are neither good nor bad,
and they do not result in either customer satisfaction or customer
dissatisfaction.
• Reversal: These attributes refer to a high degree of achievement resulting in
dissatisfaction and to the fact that not all customers are alike.
The following figure shows the dimensions of Kano Model.
2. I expect it
3. I am neutral
4. I can tolerate
5. I dislike it
Dysfunctional question: What will be your feeling if your bike/scooter brand does
not have bike wash service?
1. I like it
2. I expect it
3. I am neutral
4. I can tolerate
5. I dislike it
Cross tab has been used to get the preference category as shown in the following
table.
Customer Requirement
Dysfunctional (Negative) question
26
27
I like
it
I expect
it
I 'm
neutral
I can
tolerate
I dislike
it
Function
al
(positive
question)
I like it Q A A A O
I expect it R I I I M
I'm neutral R I I I M
I can
tolerate R I I I M
I dislike it R R R R Q
27
28
Extent of Satisfaction:
Satisfaction dimension=
Extent of Dissatisfaction:
Dissatisfaction Dimension = ]
From the various literature reviews the following model is proposed as conceptual
framework.
Here, the identified after sales services from 9 different brands are categorized as
major after sales services and the behaviour aspects of services are categorized as
supporting after sales services. Since these major and supporting after sales
services make an impact on customer satisfaction, they are grouped as independent
variables. The demographic variables are the moderating variables and customer
satisfaction is treated as dependent variable.
A small structured interview was conducted with the Service Manager or Service
In-charge to find out the list of after sales service that the brand is currently
offering via service centres. Primary data is collected with the help of structured
questionnaire especially designed for this research. The collected data is verified by
checking its reliability and validity by using SPSS software. Small portion of
KANO model is used to categorize the after sales service in terms of attractive
service, must be and one dimension. Secondary data and information is gathered
via different internationally credited journals, articles and newsletters.
Journal of Business and Social Sciences Research (JBSSR), Vol. 1, Issue 1
10
28
29
used for data analysis. Qualitative data is collected from the interview and
presented in the report.
Independent Variables:
Major After sales Service
Supporting After-Sales
Service
Behavior of Technicians
Cleanliness and comfort of
reception or waiting area
Competency of Technicians
Overall time taken for one servicing
Customer
Satisfaction
OtherVariables
Brands FrequencyofObtaining
AfterSalesService
DemographicVariables
Gender Age Education Income Occupation
29
30
Data Analysis
The research comprised of two third male respondents and about one third female
respondent. It is found that satisfaction level differs as per gender which is
significant at 0.02. Likewise, around one fifth of the respondent fall under the age
group (18 to 30), a little more than two fifth of the respondent fall under the age
group (30 to 40) and exactly two fifth of the respondent represent the age group 40
and above. It is found that age has no relationship with satisfaction level.
Approximately 20% had completed plus 2, around 44% had completed bachelors
and around 36% had completed masters and above degree. It is found that
satisfaction level differs as per education level which is significant at 0.019.
Similarly, the income level of around 29% respondents is up to Rs. 15000, approx.
23% said that their income level fell under Rs (15000-30000); approx. 29% said
that their income level was in between Rs. 30000-45000 and around 19%
respondents said that they earned Rs 45000 and more than that. It is found that
satisfaction level differs as per income level which is significant at
0.003.Moreover, around one sixth of the respondents is holding government job, a
little more than two sixth of the respondents are engaged in private jobs, a little less
than a quarter respondent are the self employed, and around a quarter respondents
are students. It is found that there is no relationship between occupation and
customer satisfaction.
Around 18% respondents obtain after sales service up to 3 times, approx. 29%
obtain after sales service 4 to 6 times, a little more than one-sixth of the
respondents obtain after sales service 7 to 9 times and a little more than two- sixth
of the respondents obtain after sales service for 10 and more times. It is found that
satisfaction level differs as per the number of times customers have obtained the
after sales service.
The research found out that satisfaction level depends on brands of bike and
scooter which was significant at 0.00. On the basis of mean score Royal Enfield
with a mean score of 4.2 has the highest level of satisfied customers, and then
comes Hero (4.08), and Mahindra (3.85). In the fourth position, we have Bajaj
(3.65),Yamaha (3.6), Others (3.58) and Honda (3.35) respectively.
Further, it was found that most of the customers were using repair and
maintenance, bike wash, inspection, spare parts and customer care mostly. The
research also found that the average ranking for all the statements of repair and
maintenance (solution, time, price and overall), spare part supply (access, on time
supply, price and overall), warranty (clarity, length, implementation and overall),
Journal of Business and Social Sciences Research (JBSSR), Vol. 1, Issue 1
12
customer care (reminder, feedback call, accuracy and overall), service camp
30
31
(information, frequency, promotion offers and overall), mobile van (time, price,
solution, service hrs and overall), driving orientation (clear cut instructions,
duration and overall) and behaviour of technicians (listen, respond, interest,
politeness and overall dealing) is more than 3 which means almost all respondents
are satisfied with services they are getting under these service headings.
Similarly, the average ranking for inspection, bike wash, cleanliness and comfort of
reception area, knowledge of technicians and overall time taken for one servicing is
more than 3 which means almost all customers are satisfied with these services.
In addition to this, approx. 93% respondents said that there was effect of after sales
service on their expected level of satisfaction and remaining denied. Trust,
reliability and free servicing were the major reasons for going to service centres
provided by the brand itself. Only, one fifth of the respondents had complained out
the after sales service. Approx. 93% said that they will revisit their service centres
again. Four fifth of the respondents said that they would recommend the brand to
their friends and relatives. 76% said that they would repurchase the same brand on
the basis of after sales service.
Result of correlation analysis of after sales service attributes with customer
satisfaction is presented in the following table for hypothesis testing.
Supporting
31
32
satisfaction from repair and maintenance and customer satisfaction. Moreover, pvalue
(0.000) < (0.05), hence, we reject null hypothesis. Thus, there is a
significant relationship between repair & maintenance and customer satisfaction.
Likewise, spare parts have the correlation coefficient greater than zero which
indicates the positive correlation between spare parts and customer satisfaction
(0.335). Although there is positive correlation, there is weak relationship between
satisfaction from spare parts and customer satisfaction as the correlation coefficient
is less than 0.5. Moreover, p-value (0.000) < (0.05), hence, we reject null
hypothesis. Thus, there is a significant relationship between spare parts and
customer satisfaction.
Similarly, warranty has the correlation coefficient greater than zero which indicates
the positive correlation between warranty and customer satisfaction (0.588). Since
correlation is greater than 0.5 we consider that there is a strong relationship
between satisfaction from warranty service and customer satisfaction. Moreover, pvalue
(0.000) < (0.05), hence, we reject null hypothesis. Thus, there is a
significant relationship between warranty and customer satisfaction.
Customer care has the correlation coefficient greater than zero which depicts the
positive correlation between customer care and customer satisfaction (0.348).
Although there is positive correlation, there is weak relationship between
satisfaction from customer care and customer satisfaction as the correlation
coefficient is less than 0.5. Moreover, p-value (0.000) < (0.05), hence, we reject
null hypothesis. Thus, there is a significant relationship between customer care and
customer satisfaction.
Service camp has the correlation coefficient greater than zero which depicts the
positive correlation between service camp and customer satisfaction (0.364).
However, there is weak relationship between satisfaction from service camp and
customer satisfaction as the correlation coefficient is less than 0.5. Moreover, pvalue
(0.000) < (0.05), hence, we reject null hypothesis. Thus, there is a
significant relationship between service camp and customer satisfaction.
Mobile van service has the correlation coefficient greater than zero which depicts
the positive correlation between mobile van service and customer satisfaction
(0.266). However, there is weak relationship between satisfaction from mobile van
service and customer satisfaction as the correlation coefficient is less than 0.5.
Moreover, p-value (0.000) < (0.05), hence, we reject null hypothesis. Thus, there
is a significant relationship between mobile van service and customer satisfaction.
Journal of Business and Social Sciences Research (JBSSR), Vol. 1, Issue 1
14
Driving orientation service has the correlation coefficient greater than zero which
depicts the positive correlation between driving orientation and customer
satisfaction (0.407). However, there is weak relationship between satisfaction from
driving orientation and customer satisfaction as the correlation coefficient is less
than 0.5. Moreover, p-value (0.000) < (0.05), hence, we reject null hypothesis.
Thus, there is a significant relationship between driving orientation and customer
satisfaction.
In terms of supporting services, the above table indicates that behaviour of
technicians have the correlation coefficient greater than zero which depicts the
positive correlation between behaviour of technicians and customer satisfaction
32
33
(0.655). Since correlation is greater than 0.5 we consider that there is a strong
relationship between satisfaction from behaviour of technicians and customer
satisfaction.Moreover, p-value (0.000) < (0.05), hence, we reject null hypothesis.
Thus, there is a significant relationship between behaviour of technicians and
customer satisfaction.
Problem identification during the inspection has the correlation coefficient greater
than zero which depicts the positive correlation between inspection and customer
satisfaction (0.597). Since correlation is greater than 0.5 we consider there is a
strong relationship between satisfaction from inspection and customer
satisfaction.Moreover, p-value (0.000) < (0.05), hence, we reject null hypothesis.
Thus, there is a significant relationship between inspection and customer
satisfaction.
Cleanliness of bike or scooter has the correlation coefficient greater than zero
which depicts the positive correlation between bike wash and customer satisfaction
(0.496). However, there is weak relationship between satisfaction from bike wash
and customer satisfaction as the correlation coefficient is less than 0.5. Moreover,
p-value (0.000) < (0.05), hence, we reject null hypothesis. Thus, there is a
significant relationship between bike wash and customer satisfaction.
Cleanliness and comfort of reception or waiting area has the correlation coefficient
greater than zero which depicts the positive correlation between cleanliness and
comfort of reception or waiting area and customer satisfaction (0.426). However,
there is weak relationship between satisfaction from mobile van service and
customer satisfaction as the correlation coefficient is less than 0.5. Moreover, pvalue
(0.000) < (0.05), hence, we reject null hypothesis. Thus, there is a
significant relationship between cleanliness and comfort of reception or waiting
area and customer satisfaction. Competency of technicians has the correlation
coefficient greater than zero which depicts the positive correlation between
competency of technician and customer satisfaction (0.51). Since correlation is
greater than 0.5 we consider there is a strong relationship between satisfaction from
competency of technicians and customer satisfaction. Moreover, p-value (0.000) <
(0.05), hence, we reject null hypothesis. Thus, there is a significant relationship
between Competency of technicians and customer satisfaction.
Overall time taken for one servicing has the correlation coefficient greater than
zero which depicts the positive correlation between overall time taken for one
servicing and customer satisfaction (0.547). Since correlation is greater than 0.5 we
consider there is a strong relationship between satisfactions from overall time taken
for one servicing and customer satisfaction. Moreover, p-value (0.000) < (0.05),
hence, we reject null hypothesis. Thus, there is a significant relationship between
overall time taken for one servicing and customer satisfaction.
Overall, 63% customers were satisfied with the after sales service and 10% were
very satisfied with the after sales service. Apart from that it was found that 206
customers said that they will recommend as well as repurchase the same brand.
Moreover, it was found that there was positive relationship between customer
satisfaction and loyalty.
33
34
The following table 2 depicts customer response in terms of must-be quality (M),
one-dimensional quality (O), attractive quality (A), reverse quality (R),
questionable (Q) and indifferent quality (I).
From the survey of functional and dysfunctional question which was collected
from 280 respondents, it was found that customers believed that Spare part supply,
Warranty, Bike wash and Service camp are the must be requirement. Must be
requirement includes all those service or features which customer expect from the
service provider. Once you involve in the purchase agreement with the seller, you
Journal of Business and Social Sciences Research (JBSSR), Vol. 1, Issue 1
expect some of the services to be present. Hence, these are the inherent services
that you expect from your service provider. Must-be requirements are also called
Threshold Attribute.
Likewise, Repair and Maintenance, Customer Care, Inspection and Mobile Van
(office hours) are regarded as one-dimensional services. One-Dimensional
Attribute includes all those service or features which customer demands or
verbalizes and fulfilment of these features will leads to customer satisfaction. One-
Dimensional attributes are also called Performance attributes. Customers always
want these performance attribute to serve them. More of it or betterment of it will
improve customer satisfaction. The price for which customer is willing to pay for a
product is closely tied to performance attribute.
And, as per the customer, Driving Orientation and 24 hours Mobile Van service are
Attractive services. Attractive Attributes are those attributes of features which
customers were not expecting, but received as bonus. Attractive attributes are also
called excitement attributes which are unspoken and unexpected by customers but
presence of these features can result into high levels of customer satisfaction,
34
35
warranty, bike wash and service camp- have satisfaction dimension less than 0.5
and dissatisfaction dimension more than -0.5. This indicates that if these service
variables or features are fulfilled then they would not add more value to
satisfaction level; however, if these services are not fulfilled or delivered properly
then it will lead to high customer dissatisfaction. Hence, these must be attributes
need to be fulfilled by the players of two wheelers in Kathmandu Valley.
Likewise, in case of One-Dimensional attribute, all the service variables or features
like repair and maintenance, customer care, inspection and mobile van (office
hours) have satisfaction dimension more than 0.5 and dissatisfaction dimension
more than -0.5. This indicates that if these service variables are fulfilled then they
will have positive impact on customer satisfaction; however, if they are not
fulfilled then they can be the reason for customer dissatisfaction. Since, one
dimensional attributes are demanded by the customers, proper fulfilment enhances
satisfaction; and failure to incorporate these services leads to extreme
dissatisfaction.
Similarly, in case of Attractive attribute, service variables like driving orientation
and 24 hrs mobile van have satisfaction dimension almost or more than 0.5 and
dissatisfaction dimension less than -0.5 or almost close to 0. This indicates that
fulfilment of these attractive attributes increases customer satisfaction, or to some
extent, they will delight the customers but even in case of non fulfilment they will
not make customers dissatisfied.
From the observation and interview with some of the customers and service
provider, it is found that some of the customers are totally satisfied with the after
sales service, however, most of the customers are unaware about all the after sales
service that their current brand is offering. They are also dissatisfied with the
35
36
unmaintained standards of after sales service. Service Providers said that customers
themselves do not show much interest to know about the after sales services and do
not come for servicing even when they are informed via newspapers. They agreed
that they did not have same service standard throughout the valley but they were
trying to maintain it. Apart from that, they believed that despite the fact that only
satisfied customers would be loyal customers and would help business to grow,
they were not able to have 100 percent satisfied customers. Moreover, they shared
that service had always been a scapegoat so whenever sales decreased management
started raising question on service. They agreed that customer satisfaction could
only be obtained with the help of effective after sales service.
Interpretation
The table shows that 18% respondents are 18-30 age group 36% of the
respondents belongs to 20-30 age group 24% of the respondents are 31-40 age group 15% of the
respondents are 41-50 age group and 6%of the respondents 50 & above age group
Interpretation
The table shows that 85.6% the respondents 14.4% of the respondents are female
36
37
Interpretation
The table shows that 31,6% the respondents are engaged in business, 26% 0f
the respondent are in students 17% of the respondents are self employed, 21.2% of the
respondents are Govt and private employees and only 3.6% of the respondents are in order group
Model of Honda two wheeler owned by respondent
Interpretation
The table shows that 22.8% of the respondents are using the active 18% 0f the
respondents are using Dio 9.6% of the respondent are using the shine 6% of the respondents are
using the CBR 150, 3.2% of the respondents are using the CBR 250 28% respondents are using the
Unicorn 12.4 of the respondents are using Dream Yuga
interpretation
the table shows that 32% of the respondent to know about Honda through
advertisement 13.2% of the respondents to know through relatives 18.4% of the respondents to
know through dealer and 13.6% of the respondents to know through promotional programs and
22.8% of the respondents are through friends.
interpretation
37
38
The table shows that 74% of respondents agreed that Honda two wheeler are
better and the rest do not agree
Factors influencing purchasing decision
interpretation
the table shows the reasons of opting Honda two wheeler 16% of the respondents looks
quality, 22% of the respondents where looks their price 19.6% of the respondents where looks
style, 18% of the respondents Where looking performance and 24.4% of the respondents are
looking mileage.
interpretation
The table shows that 74.4% of the respondents are satisfied with current two
wheeler and 23.6% of the respondents are said no
38
39
Honda is a company loved since ages for the excellent machines that it has given us. Honda is a
smart player in the market and is always known to be one step ahead of the market and hence the
company has rarely suffered in its decades long tenure.
1) Largest motorcycle manufacturer – There are many feathers in the cap of Honda motors but one
of its biggest advantage is that it is world’s largest motorcycle manufacturer. It has a lion’s share of
the market of motorcycles.
2) Largest internal combustion engines manufacturer – Like motorcycles, Honda motors also has a
large presence in combustion engine market which is used for aeroplanes, jetskis, yachts or any
heavy engine usage.
3) Eight largest automobile manufacture – Besides being the worlds number 1 automobile
manufacturer, Honda motors is also the eight largest manufacturer of Automobiles. It has a strong
and localised product portfolio.
4) Excellent R&D – One of the reasons that Honda has been able to achieve these heights is because
of its focus on R&D and its manpower employed in R&D. Hence Honda is always coming up with
elegant and efficient designs which are a hit in the market.
6) Brand equity over the years – Honda has been able to give hit products after hit products. Its
Honda Accord is one of the most loved cars and so is the Honda CRV. In motorcycles, there are
many products with high engineering which place Honda far ahead in its brand equity then many of
its competitors. In 2015, it is the 19th most valuable brand and has a brand value of 22 billion
dollars.
39
40
7) Product portfolio – The product portfolio of Honda is massive. It has at least 100 types of cars
and other automobiles, 100 types of bikes and scooters, it is into power equipments like
generators, it manufactures high quality engines, it is venturing into robotics, it has its own
aircrafts, mountain bikes and all terrain vehicles. It is also venturing into electric and alternative fuel
vehicles. As you can see, all of these products are technologically advanced and coming from the
house of Honda, they have their own brand appeal.
8) Market share – As can be seen from the above points, due to its manufacturing advantage,
Honda has a major market share in most of the products that it manufactures.
1) High costs and prices – Naturally, with a high investment in R&D and into the latest technology,
the cost of the product goes high and the pricing to end customer is high as well. This might be a
weakness of Honda but it needs to have this weakness, because it cannot reduce its brand equity
by lowering the prices.
3) Hero and Honda separation in India – At least in India, Honda motors suffered badly when Hero
and Honda were separated. As a result, Honda has had to replan its presence in India.
1) Electric and alternative fuel vehicles – This division is targeted towards the future of automobile
market wherein people will be demanding usage of clean energy because fuel like Petrol and Diesel
as well as CNG has its limitations.
2) Automobiles increasing – The number of automobiles across the world is increasing. One of the
reasons is the increase in buying power of individuals, another is that it is a social norm now to have
a motorcycle or a car. Thus, consumption is at an all time high.
3) Expansion in developing countries – Because of the rise in buying power, and the easy
automobile loads provided by banks, the purchases of automobiles is rising especially in developing
countries. Honda needs to take full advantage of this upswing in demand and capture the market
swiftly.
4) Product expansion – Adding more products in the portfolio and making more variants to increase
the product line are two tactics commonly used by Automobile manufacturers. There are many
considerations to be undertaken before launching a new model. However, product expansion is the
key to grow in a competitive market.
40
41
1) Competition – Competition from local and regional or national players in each of the countries it
is present in, is denting the revenues of Honda.
2) Fuel prices – Although people have more funds now for buying cars, the rising cost of fuel is
troubling everyone and is one of the reasons that many people are still hesitant to buy cars,
because later on the fuel cost paid is more then the car.
3) Rising transportation and other costs – One of the aspects plaguing all automobile manufacturers
is the transportation as well as manufacturing and labour costs. With inflation, these costs are
always on the rise and hence are a point of concern
Advancement of “Mobility”
Value Creation for People’s Daily Lives
In these areas, we will bring the universal passion of Honda to “serve people worldwide with the
joy of expanding their life’s potential.” And toward this end, we will “lead the advancement of
mobility and enable people everywhere in the world to improve their daily lives.” This is our 2030
Vision Statement.
41
42
Striving to become No. 1 in the areas of the environment and safety, we will invest more resources
in these areas. And we will strive to become a company that leads the effort to realize a carbon-
free and collision-free society.
42
43
Concluding Remarks
The main purpose of this study is to examine the relationship between identified
after sale services and customer satisfaction in the two wheeler industry. It is
Journal of Business and Social Sciences Research (JBSSR), Vol. 1, Issue 1
concluded that the behaviour of technicians has the strongest positive relationship
with customer satisfaction. The second determinant for customer satisfaction in
two wheeler business is competency of technicians. In case of supporting after
sales service, overall time taken for one servicing has strong and positive
relationship whereas, cleanliness and comfort of reception area have positive but
weak relationship as correlation coefficient is less than 0.5. In terms of major after
sales service, repair and maintenance, warranty and inspection have strong and
positive relationship with customer satisfaction. However, spare parts supply,
customer care, service camp, mobile van, driving orientation and bike wash have
positive but weak relationship with customer satisfaction.
Surprisingly, the customers’ satisfaction of two wheeler business relies mainly
onsupporting after sales service rather than major after sales service in Kathmandu
Valley. It can be inferred that behaviour attributes plays key role in customer
satisfaction.
In nutshell, driving orientation and 24 hrs mobile van services are attractive
attributes and can increase customers’ satisfaction level if fulfilled but do not lead
to extreme dissatisfaction if not provided. Likewise, it is concluded that spare part
supply, warranty, bike wash and service camp are must- be attributes which
increase customer dissatisfaction if not fulfilled but fulfilment of these attributes
does not contribute much in customer satisfaction. Similarly, it was found that
repair and maintenance, customer care, inspection and mobile van are one –
dimensional attribute and if fulfilled they will increase customer satisfaction.
Mustofa and Abebe (2012) found thatdriving orientation doesn’t contribute to
customer satisfaction in Ethopia, however, this research depicts driving orientation
as attractive attribute that can make customer delight. This implies that customer
satisfaction varies with place and brand.
It is found that Royal Enfield has the highest number of satisfied customers in
comparison with its counterparts. More than half of the customers are satisfied with
current after sales services provided by their respective brands. It is concluded that
service providers believes that after sales service can increase customer satisfaction
and ultimately make customers loyal.
The interview and observation raises questions regarding some issues. For
instances, in terms of service standard, customers are raising issues like uneven
services in various service centres of the same brand. Also some information issues
43
44
like how after sales service information should be provided to customers i.e.
whether customers should ask for the information or service providers themselves
should try to provide information regarding after sale service etc. Hence, these can
be the subject of further research.
After this research, two Wheeler brands are strongly recommended to provide
technical expertise and customer relations management trainings to technicians.
Along with that it is recommended to carry out Kano Model Analysis with some
fixed interval of time as all after sales attributes have no equal contribution to
overall satisfaction levels. This study is significant to distributors of two wheelers
and parent companies as they can formulate after sales service strategies by
understanding the present satisfaction level of customers and degree of each after
sales service attribute to satisfy the customers.
Budget constraint, response and non response errors and limited study area are
some of the limitation of this research. Likewise, detail qualitative approach would
have enlightened the research.
44
45
Age ( Years) :
A. 8-25
B. 25-35
C. 35-45
D. 45 above
Qualification:
A Under Graduate
B. Graduate
C. Post Graduated.
D. Any Other
.
1. 4.Occupation:
A . Student
B . Government Employee
C . Private Employee
D . Business. Any Other (Specify)
6. Since how long are you using the particular two wheeler ?
A . Less than 1 year
45
46
B . 1-2 years
C . 2-5years
D . 5-10years
E . Above 10 years
13. How would you rate service offered by ‘Ratan Honda., for your two wheeler ?
A . Excellent
B . Good
C . Average
46
47
D . Not satisfied
14. How do you rate the cost of spares and service charges charged by ‘Ratan Honda ,
A . High
b . Reasonable
c .Competitive
15. Do you prefers to get your Vehicle serviced at ‘Ratan Honda , after free services also.
A . Yes
B . No.44
47