Professional Documents
Culture Documents
To place multiple instances of the footing beneath specific columns, click Modify | Place Isolated
Foundation Multiple panel (At Columns). Select the columns and click (Finish).
FOUNDATIONS
Create foundations for the building model using isolated foundations, wall foundations, and
foundation slabs.
Structure tab Foundation panel (Isolated)
Structure tab Foundation panel (Wall)
Structure tab Foundation panel (Slab)
COLUMNS
Add columns in plan views and 3D views.
While placing columns, use the Spacebar to change the column orientation. Each time you
press the Spacebar, the column rotates to align with the intersecting grids at the selected
location. In the absence of any grids, press the Spacebar to rotate the column 90 degrees.
Use the Grid tool to select grid lines to place beams automatically between other structural
elements such as columns, structural walls, and other beams.
For example, you might have 2 structural columns located on a grid line. Beams are also added
between columns and structural walls.
In the image shown below, grids have been selected and beams have been added automatically
between all columns, walls, and beams.
2. Click Modify | Place Beam > On Grid Lines Multiple panel (Finish).
Tip: You can also draw a pick box to select multiple grid lines.
In the image below, notice how the beams were added between all columns, walls, and other
supporting beams. The pre-existing beam was not cut by the beam perpendicular to it.
When Revit places beams along a grid line, it uses the following conditions:
All the possible supports that intersect the grid line, such as columns, walls, or beams, are scanned.
If a wall is on the grid line, a beam is not placed in the wall. The ends of the wall are used as support.
If a beam intersects and crosses the grid line, that beam is considered to be an intermediate support,
because this beam supports new beams created on the grid line.
If a beam intersects but does not cross the grid line, this beam is supported by a new beam created on
the grid line.
Parent topic: Beams
Related Tasks
Sketch a Beam
Place Multiple Columns by Grid