Professional Documents
Culture Documents
4. Company : KUWAIT ALUMINIUM CO& ARABIAN LIGHT METAL CO. ( Mining & Metals)
As Mechanical Supervisor.From23.01.2003 TO 16.11.2006.
5. Company : PAL ENGINEERING & FABRICATION SERVICE PVT.LTD. As Mechanical Engineer.
Client > Bharat Petroleum Corporation Ltd. Mumbai. From 02.12.2000 TO 26.12.2002.
7. Company : SEA HAWK MARINE ALLIED SERVICE PVT.LTD. As Junior Mechanical Engineer.
Client > Mumbai Port Trust From 18.03.1997 TO 22.05.1999.
CERTIFICATIONS:
1) Approved Permit to work(Qatar Gas)
2) Approved Permit to work(CTJV)
3) H2S / BA Certificate(Qatar Gas)
4) H2S / BA Certificate(C.T.J.V.)
5) Accept Work Permit(Ar-Razi)
6) Work Permit Authorization (SABIC)
7) Emergency First Aid
8) Pressure Test & Pre-Com Safety Training
PERSONAL DETAILS:
RESIDENTIAL ADDRESS :
PASSPORT DETAILS:
PASSPORT NO : N9844595 PLACE OF ISSUE : MUMBAI
DATE OF ISSUE : 27.05.2016 DATE OF EXPIRY : 26.05.2026
•Mechanical Maintenance of all Rotating and Static equipment’s. all pipeline maintenance activities
involving block valve and emergency shutdown valve facilities, launcher and receiver facilities,
cathodes protection facilities, pipeline pig run operations, inspection operations and any pipeline
purging and testing operations and ensure operation within design parameters.
Execution of routine maintenance, LLF & PM activities in the plant. Job allocation and arrangement of
material and other resources considering operations priority. Ensure that the jobs SMPs are followed.
Attempt for reliability improvement of static and rotary equipment in the plant. Act upon non
conformity observed by operation, maintenance, inspection and RMC.
•Maintenance of safety Relief valve and General valves (Gate Valve, Globe Valve, Ball valve, Check
. Valve, Butterfly Valve etc.) Repair and change the Gland packing.
•Assigns preventive and corrective maintenance jobs as per the direction of Maintenance In charge .
Co-ordinates activities of maintenance staff. Maintains records, prepares reports and composes
correspondence related to work. Completes all necessary forms and documentation are completed
prior to, during and subsequent to maintenance activities.
•Executes work order through CMMS (SAP) and co-ordinates with maintenance engineer for job
completion and technical matters.
•Maintain logs, records and files for all assigned area equipment’s information, history and spare
part Inventory.
•Identification and control of hazards in assigned work area.
•Ensure aspects identified are monitored and operational controls are followed.
•Daily Routine Check-up and plant activities.
•Knowledge of various reliability processes – PM / CM / LLF etc.
•Knowledge in TPM and 5S activities.
•SupervisingMaintenancethe two Farrell Aluminium Extrusion presses 1650 Tons and 2000
Ton.Maintenance of Conveyors. Maintenance of Anodizing Plant. Maintenance of Electrostatic
Powder Coating Plant.Maintenance of Thermal Break & Aluminium Recycling Plant.Servicing of
hydraulic, pneumatic starter and hydraulic pump.