Professional Documents
Culture Documents
Blog
http://www.simecpellet.com/blog/how_to_adjust_the_clearance_between_rollers_and_ring_die.html 1/6
27/11/2017 How to Adjust the Clearance Between Rollers and Ring Die
nuts and lock screws have been tightened to avoid looseness and damage
to the machine during operation.
http://www.simecpellet.com/blog/how_to_adjust_the_clearance_between_rollers_and_ring_die.html 2/6
27/11/2017 How to Adjust the Clearance Between Rollers and Ring Die
Open the pellet chamber door, loosen the fastening bolts of the feed
cone (See Figure 1), hold two handles of feed cone tightly with hands, turn
the feed cone clockwise, thus feed cone can be removed. Then clear away
the accumulated material on the inside surface of die (1) and surface of
rollers (3), loosen lock screws (2) and retaining nuts (6) twist the adjusting
screw (7) so as to make the roller adjusting quadrant (10) turn. Clearance
becomes smaller when making adjustment in the arrow direction of the
roller adjusting gear, and clearance becomes bigger when making
adjustment in the opposite direction. If adjustment cannot be made in the
shown direction, it means rollers are mounted wrong and must be mounted
again. It is vital rolls are adjusted counter-clockwise to close the gap.
http://www.simecpellet.com/blog/how_to_adjust_the_clearance_between_rollers_and_ring_die.html 3/6
27/11/2017 How to Adjust the Clearance Between Rollers and Ring Die
http://www.simecpellet.com/blog/how_to_adjust_the_clearance_between_rollers_and_ring_die.html 4/6
27/11/2017 How to Adjust the Clearance Between Rollers and Ring Die
SEND ENQUIRY
Name *
E-mail *
http://www.simecpellet.com/blog/how_to_adjust_the_clearance_between_rollers_and_ring_die.html 5/6
27/11/2017 How to Adjust the Clearance Between Rollers and Ring Die
Message...
Send
Home
About Us
Products
Projects
Blog
Services
Contact Us
Contacts
HENAN SINOVO MACHINERY ENGINEERING CO.,LTD
0086 3725375806
0086 3725360386
No.68,Airport Industrial Zone,Zhengzhou,Henan,China
info@simecpellet.com
http://www.simecpellet.com/blog/how_to_adjust_the_clearance_between_rollers_and_ring_die.html 6/6